The DOI matches its Crossref record; 94 of the 95 references it cites were found in a registry or an index.
Modeling the gas and particle flow inside cyclone separators
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Cyclone separators remove particles from fluid streams by inducing a fluid flow to rotate at high, predetermined speeds. 5”
From Cyclone Sub-Micron Particulate Separator (2023) · cites this paper as [5]
In the citing paper
“that can be used to remove particles in the air down to 1 µm or less.”
From Cyclone Sub-Micron Particulate Separator (2023) · cites this paper as [5]
Citations
Cites
Strategies for turbulence modelling and simulations
Spalart, P. R. (2000) · International Journal of Heat and Fluid Flow · doi:10.1016/s0142-727x(00)00007-2 · Cited by 1,592
On predicting particle-laden turbulent flows
Elghobashi, S. (1994) · Applied Scientific Research · doi:10.1007/bf00936835 · Cited by 1,554
The Particle-Source-In Cell (PSI-CELL) Model for Gas-Droplet Flows
Crowe, C. T., Sharma, M. P., & Stock, D. E. (1977) · Journal of Fluids Engineering · doi:10.1115/1.3448756 · Cited by 1,214
Syred, N. (2006) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2005.10.002 · Cited by 1,031
Combustion in swirling flows: A review
Syred, N., & Beer, J. M. (1974) · Combustion and Flame · doi:10.1016/0010-2180(74)90057-1 · Cited by 1,006
On the mixture model for multiphase flow
Manninen, M., Taivassalo, V., Energy, V., & Kallio, S. (1996) · Cited by 852
Lucca-Negro, O., & O'Doherty, T. (2001) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(00)00022-8 · Cited by 818
Circulating fluidized bed technology III
Basu, P., Horio, M., & Hasatani, M. (1991) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 779
Eulerian two-phase flow theory applied to fluidization
Enwald, H., Peirano, E., & Almstedt, A.-E. (1996) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(96)90004-x · Cited by 599
Numerical Models for Two-Phase Turbulent Flows
Crowe, C. T., Troutt, T. R., & Chung, J. N. (1996) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fl.28.010196.000303 · Cited by 594
Cited by
Modeling of biomass gasification in fluidized bed
Gómez-Barea, A., & Leckner, B. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.12.002 · Cited by 905
The effect of cyclone inlet dimensions on the flow pattern and performance
Elsayed, K., & Lacor, C. (2011) · Applied Mathematical Modelling · doi:10.1016/j.apm.2010.11.007 · Cited by 386
CFD–DEM simulation of the gas–solid flow in a cyclone separator
Chu, K. W., Wang, B., Xu, D. L., Chen, Y. X., & Yu, A. B. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2010.11.026 · Cited by 319
Elsayed, K., & Lacor, C. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.08.042 · Cited by 274
Theories and Applications of CFD–DEM Coupling Approach for Granular Flow: A Review
El-Emam, M. A., Zhou, L., Shi, W., Han, C., Bai, L., & Agarwal, R. (2021) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-021-09568-9 · Cited by 231
Aravind, P. V., & de Jong, W. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.03.006 · Cited by 230
Fluidized bed waste incinerators: Design, operational and environmental issues
Van Caneghem, J., Brems, A., Lievens, P., Block, C., Billen, P., Vermeulen, I., Dewil, R., Baeyens, J., & Vandecasteele, C. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.03.001 · Cited by 213
Scale-up of pharmaceutical spray drying using scale-up rules: A review
Poozesh, S., & Bilgili, E. A. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.03.047 · Cited by 190
A CFD study of the effect of cyclone size on its performance parameters
Azadi, M., Azadi, M., & Mohebbi, A. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.06.115 · Cited by 180
Elsayed, K., & Lacor, C. (2011) · Powder Technology · doi:10.1016/j.powtec.2011.05.002 · Cited by 154
Numerical analysis of forces exerted on particles in cyclone separators
Song, C., Pei, B., Jiang, M., Wang, B., Xu, D., & Chen, Y. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.02.052 · Cited by 136
Stopper, U., Meier, W., Sadanandan, R., Stöhr, M., Aigner, M., & Bulat, G. (2013) · Combustion and Flame · doi:10.1016/j.combustflame.2013.04.005 · Cited by 130
Shukla, S. K., Shukla, P. K., & Ghosh, P. (2010) · Advanced Powder Technology · doi:10.1016/j.apt.2010.11.009 · Cited by 133
Design and performance evaluation of a new cyclone separator
Karagöz, İ., Avcı, A., Sürmen, A., & Sendogan, O. (2013) · Journal of Aerosol Science · doi:10.1016/j.jaerosci.2013.01.010 · Cited by 121
The effect of the dust outlet geometry on the performance and hydrodynamics of gas cyclones
Elsayed, K., & Lacor, C. (2012) · Computers & Fluids · doi:10.1016/j.compfluid.2012.07.029 · Cited by 122
Shukla, S. K., Shukla, P. K., & Ghosh, P. (2012) · Applied Mathematical Modelling · doi:10.1016/j.apm.2012.11.019 · Cited by 119
Engineering Advances in Spray Drying for Pharmaceuticals
Baumann, J. M., Adam, M. S., & Wood, J. D. (2021) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-091720-034106 · Cited by 112
El‐Emam, M. A., Zhou, L. H., & Omara, A. I. (2023) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2023.08.003 · Cited by 109
Influence of the dipleg shape on the performance of gas cyclones
Parvaz, F., Hosseini, S. H., Elsayed, K., & Ahmadi, G. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.116000 · Cited by 106
Optimization of the cyclone separator geometry for minimum pressure drop using Co-Kriging
Elsayed, K. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.09.038 · Cited by 108
Cai, R., Zhang, H. F., Zhang, M., Yang, H., Lyu, J., & Yue, G. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.02.009 · Cited by 100
Experimental and CFD study on effects of spiral guide vanes on cyclone performance
Zhou, F., Sun, G., Han, X., Zhang, Y., & Bi, W. (2018) · Advanced Powder Technology · doi:10.1016/j.apt.2018.09.022 · Cited by 100
CFD simulation of cyclone separators to reduce air pollution
Bogodage, S. G., & Leung, A. Y. T. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.08.023 · Cited by 100
Numerical simulation of natural gas flows in diffusers for supersonic separators
Wen, C., Cao, X., Yang, Y. J., & Li, W. (2011) · Energy · doi:10.1016/j.energy.2011.11.047 · Cited by 94
Analysis of the effect of vortex on the flow field of a cylindrical cyclone separator
Gao, Z., Juan, W., Wang, J., Mao, Y., & Wei, Y. (2018) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.08.024 · Cited by 91
Li, X., Kawashima, K., & KAGAWA, T. (2008) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2008.03.010 · Cited by 88
Wen, C., Cao, X., Yang, Y. J., & Zhang, J. (2011) · Advanced Powder Technology · doi:10.1016/j.apt.2011.02.012 · Cited by 85
An overview of novel geometrical modifications and optimizations of gas-particle cyclone separators
Guo, M., Liu, Y., Son, H., Le, D. K., Manickam, S., Sun, X., & Yoon, J. Y. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.125136 · Cited by 86
Ji, Z., Xiong, Z., Wu, X., Chen, H., & Wu, H. (2008) · Powder Technology · doi:10.1016/j.powtec.2008.10.015 · Cited by 83
Numerical investigation of performance characteristics of a cyclone prolonged with a dipleg
Kaya, F., & Karagöz, İ. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.01.040 · Cited by 83
Flue gas conditioning for reducing suspended particulate matter from thermal power stations
Shanthakumar, S., Singh, D. N., & Phadke, R. C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2008.04.001 · Cited by 83
“As a result, cyclone separators are normally used for removal of coarse particles [18,51,60], which may result in abrasion of the cyclone parts.”
BackgroundLe, D. K., & Yoon, J. Y. (2020) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2020.107867 · Cited by 85
Karmakar, A., Daftari, T., Sivagami, K., Chandan, M. R., Shaik, A. H., Kiran, B., & Chakraborty, S. (2023) · Environmental Technology & Innovation · doi:10.1016/j.eti.2023.103017 · Cited by 90
Design of a novel gas cyclone vortex finder using the adjoint method
Elsayed, K. (2015) · Separation and Purification Technology · doi:10.1016/j.seppur.2015.01.010 · Cited by 86
Numerical study of the effect of changing the cyclone cone length on the gas flow field
Hamdy, O., Bassily, M. A., El-Batsh, H. M., & Mekhail, T. A.-M. (2017) · Applied Mathematical Modelling · doi:10.1016/j.apm.2017.01.069 · Cited by 86
The design and scale-up of spray dried particle delivery systems
Al-Khattawi, A., Bayly, A. E., Phillips, A., & Wilson, D. (2017) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2017.1321634 · Cited by 80
“Cyclone performance is described by its collection efficiency and pressure drop which in turn depend on the velocity, solid concentration, and pressure fields within the cyclone [93].”
BackgroundInfluentialWei, Q., Sun, G., & Gao, C. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.05.038 · Cited by 79
Kozołub, P., Klimanek, A., Białecki, R. A., & Adamczyk, W. P. (2017) · Particuology · doi:10.1016/j.partic.2016.09.003 · Cited by 79
“Turbulence effects and detailed mutual gas–particle and particle interaction mechanisms are not considered (Cortes & Gil, 2007).”
BackgroundMethodInfluentialEl‐Emam, M. A., Shi, W., & Zhou, L. H. (2019) · Advanced Powder Technology · doi:10.1016/j.apt.2019.08.015 · Cited by 78
CFD Modeling of Gas–Solid Cyclone Separators at Ambient and Elevated Temperatures
Nakhaei, M., Lu, B., Tian, Y., Wang, W., Dam‐Johansen, K., & Wu, H. (2020) · Processes · doi:10.3390/pr8020228 · Cited by 81
“The double vortex structure is inherently unstable due to the presence of a radial pressure gradient imposed by the vortex itself [20].”
BackgroundMethodInfluentialEl‐Emam, M. A., Zhou, L. H., Shi, W., & Han, C. (2021) · Powder Technology · doi:10.1016/j.powtec.2021.03.006 · Cited by 77
Coarse-grain DEM-CFD modelling of dense particle flow in Gas–Solid cyclone
Napolitano, E. S., Renzo, A. D., & Maio, F. P. D. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.120591 · Cited by 75
High-efficiency industrial cyclone separator: A CFD study
Misiulia, D., Antonyuk, S. I., Andersson, A. G., & Lundström, T. S. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.10.064 · Cited by 75
Zhang, Y., Ran, Z., Jin, B., Zhang, Y., Zhou, C., & Sher, F. (2019) · International Journal of Chemical Reactor Engineering · doi:10.1515/ijcre-2019-0064 · Cited by 74
Influence of the inlet cross-sectional shape on the performance of a multi-inlet gas cyclone
Babaoğlu, N. U., Parvaz, F., Hosseini, S. H., Elsayed, K., & Ahmadi, G. (2021) · Powder Technology · doi:10.1016/j.powtec.2021.02.008 · Cited by 74
Effects of different inlet structures on the flow field of cyclone separators
Gao, Z., Juan, W., Liu, Z., Wei, Y., Wang, J., & Mao, Y. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.06.014 · Cited by 73
A practical model for estimating pressure drop in cyclone separators: An experimental study
Demir, S. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.08.024 · Cited by 71
Zhang, Z., Li, Q., Zhang, Y.-H., & Wang, H. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.120394 · Cited by 70
Evaluation of Numerical Schemes for Dispersed Phase Modeling of Cyclone Separators
Shukla, S. K., Shukla, P. K., & Ghosh, P. (2011) · Engineering Applications of Computational Fluid Mechanics · doi:10.1080/19942060.2011.11015367 · Cited by 78
“Detailed comparison of such models and correlations can be found in the article by Cortés and Gil (2007).”
BackgroundShape optimization of a cyclone separator using multi-objective surrogate-based optimization
Singh, P., Couckuyt, I., Elsayed, K., Deschrijver, D., & Dhaene, T. (2015) · Applied Mathematical Modelling · doi:10.1016/j.apm.2015.11.007 · Cited by 70
Numerical study of vortex eccentricity in a gas cyclone
Dong, S., Jiang, Y., Jin, R., Dong, K., & Wang, B. (2019) · Applied Mathematical Modelling · doi:10.1016/j.apm.2019.11.024 · Cited by 68
Effects of the geometric configuration on cyclone performance
Hsiao, T.-C., Huang, S.-H., Hsu, C.-W., Chen, C.-C., & Chang, P.-K. (2015) · Journal of Aerosol Science · doi:10.1016/j.jaerosci.2015.03.005 · Cited by 67
Yao, Y., Huang, W., Wu, Y., Zhang, Y., Zhang, M., Yang, H., & Lyu, J. (2021) · Powder Technology · doi:10.1016/j.powtec.2021.07.044 · Cited by 66
CFD modeling and analysis of the multiphase flow and performance of dense medium cyclones
Kuang, S., Qi, Z., Yu, A., Vince, A., Barnett, G. D., & Barnett, P. J. (2013) · Minerals Engineering · doi:10.1016/j.mineng.2013.10.012 · Cited by 65
Numerical simulation of an internal flow field in a uniflow cyclone separator
Oh, J., Choi, S., & Kim, J. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.01.015 · Cited by 64
Deng, Y., Zhang, L., Hou, H., Yu, B., & Sun, D. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.05.039 · Cited by 64
Performance evaluation of a new cyclone separator – Part II simulation results
Xu, W., Li, Q., Wang, J., & You-hai, J. (2016) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.01.012 · Cited by 63
Chinnici, A., Arjomandi, M., Tian, Z. F., Lu, Z. H., & Nathan, G. J. (2015) · Solar Energy · doi:10.1016/j.solener.2015.08.017 · Cited by 61
Vortex characteristics of a gas cyclone determined with different vortex identification methods
Zhang, Z., Dong, S., Jin, R., Dong, K., Hou, L., & Wang, B. (2022) · Powder Technology · doi:10.1016/j.powtec.2022.117370 · Cited by 60
Haig, C. W., Hursthouse, A. S., McIlwain, S., & Sykes, D. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.03.008 · Cited by 60
“The characteristic air flow pattern of a reverse-flow cyclone consists of an inner and an outer vortex, both spiralling in the same sense, with the outer vortex descending into the cyclone, reversing its direction and exiting the cyclone through the vortex finder located in the cyclone roof [11,12].”
BackgroundComputational study of the multiphase flow in a dense medium cyclone: Effect of particle density
Chu, K., Wang, B., Yu, A., & Vince, A. (2012) · Chemical Engineering Science · doi:10.1016/j.ces.2012.01.007 · Cited by 59
“Another fact that supports the decrease of the tangential velocity in a cyclone when heavy solids are loaded is that it is widely found in gas cyclones that both the tangential velocity and pressure drop decrease significantly in a gas cyclone after loading solids (Yuu et al., 1978; Hoffmann et al., 1992; Fassani and…”
BackgroundJang, K., Lee, G. G., & Huh, K. Y. (2018) · Computers & Fluids · doi:10.1016/j.compfluid.2018.04.032 · Cited by 59
Effects of different cylinder roof structures on the vortex of cyclone separators
Li, W., Huang, Z., Li, G., & Ye, C. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121370 · Cited by 57
Hwang, I. S., Jeong, H. J., & Hwang, J. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.08.008 · Cited by 55
Time-frequency analysis of the vortex motion in a cylindrical cyclone separator
Gao, Z., Juan, W., Wang, J., & Mao, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.054 · Cited by 54
The development of dynamic models for a dense medium separation circuit in coal beneficiation
Meyer, E. J., & Craig, I. K. (2010) · Minerals Engineering · doi:10.1016/j.mineng.2010.05.020 · Cited by 53
“Cortés and Gil (2007) indicate that CFD modelling can become very costly owing to the unsteady nature of the flow that requires large eddy simulations or direct numerical simulations.”
BackgroundMethodNumerical study on tangential velocity indicator of free vortex in the cyclone
Wu, J., Zhang, Y., & Wang, H. (2014) · Separation and Purification Technology · doi:10.1016/j.seppur.2014.06.007 · Cited by 51
Mazyan, W. I., Ahmadi, A., Brinkerhoff, J., Ahmed, H., & Hoorfar, M. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2017.09.040 · Cited by 51
Le, D. K., & Yoon, J. Y. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2022.12.035 · Cited by 49
Prediction of the maximum-efficiency cyclone length for a cyclone with a tangential entry
Sürmen, A., Avcı, A., & Karamangil, M. İ. (2010) · Powder Technology · doi:10.1016/j.powtec.2010.10.002 · Cited by 49
Dziubak, T. (2022) · Energies · doi:10.3390/en15113871 · Cited by 51
Tofighian, H., Amani, E., & Saffar‐Avval, M. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.10.091 · Cited by 48
Effect of Shear Stress on Deoiling of Oil‐Contaminated Catalysts in a Hydrocyclone
Xu, Y., Liu, Y., Zhang, Y., Yang, X., & Wang, H. (2015) · Chemical Engineering & Technology · doi:10.1002/ceat.201500378 · Cited by 47
Zhao, B., Su, Y., & Cui, G. (2016) · Energy · doi:10.1016/j.energy.2016.02.056 · Cited by 47
CFD simulation of a novel design of square cyclone with dual-inverse cone
Fatahian, H., Hosseini, E., & Fatahian, E. (2020) · Advanced Powder Technology · doi:10.1016/j.apt.2020.02.007 · Cited by 46
Başaran, M., Erpul, G., Uzun, O., & Gabriels, D. M. (2011) · Geomorphology · doi:10.1016/j.geomorph.2011.04.016 · Cited by 46
The efficiency improvement of a large-diameter cyclone – The CFD calculations
Kępa, A. (2013) · Separation and Purification Technology · doi:10.1016/j.seppur.2013.06.040 · Cited by 44
Study on the basic characteristics of a vortex bearing element
Li, X., HORIE, M., & KAGAWA, T. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4372-0 · Cited by 44
“2b to narrow the clearance and increase the flotation stiffness [21–25].”
BackgroundWasilewski, M., & Duda, J. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.11.018 · Cited by 44
Large eddy simulation of a two-phase reacting swirl flow inside a cement cyclone
Mikulčić, H., Vujanović, M., Ashhab, M. S., & Duić, N. (2014) · Energy · doi:10.1016/j.energy.2014.04.064 · Cited by 44
“Firstly the gas swirls downwards in the outer cyclone part, where the separation is done, and then in the lower part of the cyclone where the axial velocity reverses, the gas starts to swirl upwards in the inner cyclone region [9].”
BackgroundComputational Fluid Dynamics Study of a Noncontact Handling Device Using Air-Swirling Flow
Li, X., Shouichiro, I. I. O., Kawashima, K., & KAGAWA, T. (2010) · Journal of Engineering Mechanics · doi:10.1061/(asce)em.1943-7889.0000237 · Cited by 44
“(1999), Cortes and Gil (2007), and Gupta and Kumar (2007) had confirmed that a high Reynolds number and strong swirl make the flow field very complex with high turbulence intensity and recirculation inside cyclone separator and combustion cylinder, which may also be the case with the vortex gripper.”
BackgroundMajdalani, J. (2012) · Fluid Dynamics Research · doi:10.1088/0169-5983/44/6/065506 · Cited by 43
Houben, J., Brunnmair, E., Weiß, C., & Pirker, S. (2016) · Journal of Applied Fluid Mechanics · doi:10.18869/acadpub.jafm.68.224.23934 · Cited by 43
“The fluid velocity components ui and uj are known to be turbulent and fluctuating in time for the flow in cyclone separators (Gronald and Derksen (2011)) and Eq.”
BackgroundAnalysis of the pressure fluctuation in the flow field of a large-scale cyclone separator
Jia, M., Wang, D., Yan, C., Song, J., Han, Q., Chen, F., & Wei, Y. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.11.007 · Cited by 43
Effect of particle hydrophilicity on the separation performance of a novel cyclone
Zhang, Y., Jiang, Y., Xin, R., Yu, G., Jin, R., Dong, K., & Wang, B. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.116315 · Cited by 42
Structure and performance of the circumfluent cyclone
Wang, W., Zhang, P., Wang, L., Chen, G., Li, J., & Li, X. (2010) · Powder Technology · doi:10.1016/j.powtec.2010.02.020 · Cited by 42
“Cortes and Gil [25] posited that the temporary adhesion of small particles to larger ones or the entrainment of the former by the latter inside the cyclone separator could be significant factors for increased efficiency at a high particle concentration.”
BackgroundBanjac, V. V., Pezo, L. L., Pezo, M. L., Vukmirović, Đ., Čolović, D., Fišteš, A., & Čolović, R. R. (2017) · Advanced Powder Technology · doi:10.1016/j.apt.2017.01.013 · Cited by 41
Effect of Inlet Air Volumetric Flow Rate on the Performance of a Two-Stage Cyclone Separator
Chen, J., Jiang, Z., & Chen, J. (2018) · ACS Omega · doi:10.1021/acsomega.8b02043 · Cited by 41
Morin, M., Raynal, L., Karri, S. B. R., & Cocco, R. A. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.08.052 · Cited by 44
Guo, Z. X., Chen, G., & Yan, X. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2018.09.021 · Cited by 40
Yang, X., Yang, J., Wang, S., & Zhao, Y. (2022) · Powder Technology · doi:10.1016/j.powtec.2022.117609 · Cited by 39
The Secondary Flows in a Cyclone Separator: A Review
Wang, C., Ma, Y., & Sui, W. (2023) · Processes · doi:10.3390/pr11102935 · Cited by 38
Distaso, E., Amirante, R., Calò, G., Palma, P. D., & Tamburrano, P. (2020) · Energies · doi:10.3390/en13153993 · Cited by 36
“Fragmentation mainly affects larger particles, which can become detectable by the instrument [80,81], explaining the increase of the particles with size larger than 350 nm observed in Figure 6a.”
BackgroundDivision of outlet flow in a cyclone vortex finder—The CFD calculations
Kępa, A. (2010) · Separation and Purification Technology · doi:10.1016/j.seppur.2010.08.009 · Cited by 35
Singh, P., Couckuyt, I., Elsayed, K., Deschrijver, D., & Dhaene, T. (2017) · Journal of Optimization Theory and Applications · doi:10.1007/s10957-017-1114-3 · Cited by 35
A Lagrangian-Eulerian hybrid model for the simulation of industrial-scale gas-solid cyclones
Schneiderbauer, S., Haider, M. F., Hauzenberger, F., & Pirker, S. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.07.064 · Cited by 35
Zhang, T., Liu, C., Guo, K., Liu, H., & Wang, Z. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b02813 · Cited by 34
Performance improvement of cyclone separator by integrated compact bends
Zhao, B., Wang, D., & Su, Y. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.05.004 · Cited by 33
Scale-adaptive simulation (SAS) modelling of a pilot-scale spray dryer
Fletcher, D. F., & Langrish, T. A. G. (2009) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2009.03.006 · Cited by 33
Zhang, H., & Liu, Q. (2020) · Annals of Nuclear Energy · doi:10.1016/j.anucene.2020.107362 · Cited by 32
Metadata
- Authors
- CORTES, C., & GIL, A.
- Affiliations
- Universidad de Zaragoza (ES)
- Venue
- Progress in Energy and Combustion Science
- Publisher
- Elsevier BV
- Published
- 2007-10
- Volume
- 33
- Issue
- 5
- Pages
- 409-452
- ISSN
- 0360-1285 (ISSN-L)
- OpenAlex
- W2075297277
- Cited by
- 438
- References
- 95
- Citations by year
- 2026: 23 · 2025: 18 · 2024: 33 · 2023: 35 · 2022: 33 · 2021: 27 · 2020: 32 · 2019: 27 · 2018: 24 · 2017: 28 · 2016: 30 · 2015: 26 · 2014: 13 · 2013: 11 · 2012: 19
- FWCI
- 17.28
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Progress in Energy and Combustion Science (publishedVersion)
- Topics
- Physical Sciences › Engineering › Computational Mechanics › Cyclone Separators and Fluid Dynamics
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Particle Dynamics in Fluid Flows
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Aerosol Filtration and Electrostatic Precipitation
- Keywords
- cyclone separator, particle-laden flow, tangential velocity, pressure drop, collection efficiency, mass loading, secondary flow, flow instability, two-phase flow, unsteady flow
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.