The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Advanced heat transfer fluids for direct molten salt line-focusing CSP plants
Abstract
Abstract Concentrating solar power coupled to thermal energy storage (TES) is a vastly growing industrial process allowing for the generation of dispatchable and green electricity. This paper focuses on direct molten salt line-focusing technology using linear Fresnel and parabolic trough collector systems. Direct molten salt technology utilizes molten salt as heat transfer fluid in solar field and TES medium. Nitrate salts can be applied since they cover a wide temperature range. As storage medium Solar Salt, a binary NaNO 3 − KNO 3 (60–40 wt%) mixture, is most commonly used but variations of this system have promising thermal properties in terms of a lower melting temperature to minimize the risk of undesired salt freezing events. These modified salts are typically ternary, ternary reciprocal or higher order systems formed by adding additional cations, anions or both. In this study five molten salt systems Solar Salt, HitecXL (CaKNa//NO3), LiNaK-Nitrate, Hitec (NaK//NO23) and CaLiNaK//NO23 are both investigated and critically reviewed. Their thermo-physical properties including phase diagrams, composition, melting ranges, melting temperature, minimum operation temperature, thermal stability, maximum operation temperature, density, heat capacity, thermal conductivity, viscosity and handling are evaluated and the most recommended values are discussed and highlighted. This review contributes to a better understanding of how the listed properties can be determined in terms of measurement conditions and provides temperature dependent data useful for future simulations of direct molten salt LF CSP plants.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1999) · Choice Reviews Online · doi:10.5860/choice.37-0940 · Cited by 14,314
FactSage thermochemical software and databases, 2010–2016
Bale, C. W., Bélisle, E., Chartrand, P., Decterov, S. A., Eriksson, G., Gheribi, A. E., Hack, K., Jung, I.-H., Kang, Y.-B., Melançon, J., et al. (2016) · Calphad · doi:10.1016/j.calphad.2016.05.002 · Cited by 2,050
A review of solar collectors and thermal energy storage in solar thermal applications
Tian, Y., & Zhao, C. Y. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.051 · Cited by 1,772
Thermal energy storage technologies and systems for concentrating solar power plants
Kuravi, S., Trahan, J., Goswami, D. Y., Rahman, M. M., & Stefanakos, E. K. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2013.02.001 · Cited by 1,295
Experimentation, Validation, and Uncertainty Analysis for Engineers
Coleman, H. W., & Steele, W. G. (2018) · Wiley eBooks · doi:10.1002/9781119417989 · Cited by 1,154
Thermal energy storage: Recent developments and practical aspects
Zhang, H., Baeyens, J., Cáceres, G., Degrève, J., & Lv, Y. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.003 · Cited by 910
Weinstein, L. A., Loomis, J., Bhatia, B., Bierman, D. M., Wang, E. N., & Chen, G. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00397 · Cited by 709
Two-tank molten salt storage for parabolic trough solar power plants
Herrmann, U., Kelly, B., & Price, H. (2004) · Energy · doi:10.1016/s0360-5442(03)00193-2 · Cited by 617
González-Roubaud, E., Pérez-Osorio, D., & Prieto, C. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.084 · Cited by 578
Renewable energy technologies: cost analysis series
Revel, D. (2012) · OpenEdition (OpenEdition) · doi:10.58079/o9q1 · Cited by 503
Thermal stability of low temperature ionic liquids revisited
Kosmulski, M., Gustafsson, J., & Rosenholm, J. B. (2004) · Thermochimica Acta · doi:10.1016/j.tca.2003.08.022 · Cited by 461
Experimentation, Validation, and Uncertainty Analysis for Engineers
Coleman, H. W., Steele, W. G., & Buzhuga, M. (2010) · Noise Control Engineering Journal · doi:10.3397/1.3383084 · Cited by 444
Assessment of a Molten Salt Heat Transfer Fluid in a Parabolic Trough Solar Field
Kearney, D. W., Herrmann, U., Nava, P., Kelly, B., Mahoney, R., Pacheco, J. E., Cable, R. N., Potrovitza, N., Blake, D., & Price, H. (2003) · Journal of Solar Energy Engineering · doi:10.1115/1.1565087 · Cited by 443
Survey of Thermal Energy Storage for Parabolic Trough Power Plants
Herrmann, U., & Kearney, D. W. (2002) · Journal of Solar Energy Engineering · doi:10.1115/1.1467601 · Cited by 416
Garg, H. P., Mullick, S. C., & Bhargava, A. K. (1985) · Springer eBooks · doi:10.1007/978-94-009-5301-7 · Cited by 364
Janz, G. J., Allen, C. B., Bansal, N. P., Murphy, R. M., & Tomkins, R. P. T. (1979) · doi:10.6028/nbs.nsrds.61p2 · Cited by 336
High Temperature Properties and Decomposition of Inorganic Salts Part 3, Nitrates and Nitrites
Stern, K. H. (1972) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.3253104 · Cited by 308
Material aspects of Solar Salt for sensible heat storage
Bauer, T., Pfleger, N. A., Breidenbach, N., Eck, M., Laing, D., & Kaesche, S. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.072 · Cited by 306
Self-citationThermal Decomposition of Metal Nitrates in Air and Hydrogen Environments
Yuvaraj, S., Fan-Yuan, L., Chang, T.-H., & Chuin-Tih, Y. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp026961c · Cited by 303
A review on preparation methods and challenges of nanofluids
Sidik, N. A. C., Mohammed, H. A., Alawi, O. A., et al. (2014) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2014.03.002 · Cited by 298
Enhanced Specific Heat of Silica Nanofluid
Shin, D., & Banerjee, D. (2011) · Journal of Heat Transfer · doi:10.1115/1.4002600 · Cited by 256
Hot corrosion of materials: Fundamental studies
Rapp, R. A., & Zhang, Y.-S. (1994) · JOM · doi:10.1007/bf03222665 · Cited by 247
Janz, G. J. (1988) · Journal of Physical and Chemical Reference Data · Cited by 242
Olivares, R. I. (2012) · Solar Energy · doi:10.1016/j.solener.2012.05.025 · Cited by 201
Development of Molten Salt Heat Transfer Fluid With Low Melting Point and High Thermal Stability
Raade, J. W., & Padowitz, D. (2011) · Journal of Solar Energy Engineering · doi:10.1115/1.4004243 · Cited by 195
Increment of specific heat capacity of solar salt with SiO2 nanoparticles
Andreu-Cabedo, P., Mondragon, R., Hernandez, L., Martinez-Cuenca, R., Cabedo, L., & Julia, J. E. (2014) · Nanoscale Research Letters · doi:10.1186/1556-276x-9-582 · Cited by 190
(2013) · Elsevier eBooks · doi:10.1016/c2012-0-00049-x · Cited by 167
Recent progress in solar thermal energy storage using nanomaterials
Ahmed, S. F., Khalid, M., Rashmi, W., Chan, A., & Shahbaz, K. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.034 · Cited by 148
Pfleger, N. A., Bauer, T., Martin, C., Eck, M., & Wörner, A. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.154 · Cited by 144
Self-citationMulticomponent Molten Salt Mixtures Based on Nitrate/Nitrite Anions
Cordaro, J. G., Rubin, N. C., & Bradshaw, R. (2011) · Journal of Solar Energy Engineering · doi:10.1115/1.4003418 · Cited by 119
High-Temperature Molten Salts for Solar Power Application
Bauer, T., Pfleger, N., Laing, D., et al. (2013) · Elsevier eBooks · doi:10.1016/b978-0-12-398538-5.00020-2 · Cited by 114
Self-citationSystem value and progress of CSP
Gauché, P., Rudman, J., Mabaso, M., Landman, W. A., von Backström, T. W., & Brent, A. C. (2017) · Solar Energy · doi:10.1016/j.solener.2017.03.072 · Cited by 113
L'vov, B. V. (2001) · Thermochimica Acta · doi:10.1016/s0040-6031(01)00507-x · Cited by 111
Rathgeber, C., Miró, L., Cabeza, L. F., & Hiebler, S. (2014) · Thermochimica Acta · doi:10.1016/j.tca.2014.09.022 · Cited by 109
Olivares, R. I., & Edwards, W. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.02.029 · Cited by 106
Gomez, J. C., Calvet, N., Starace, A. K., & Glatzmaier, G. C. (2013) · Journal of Solar Energy Engineering · doi:10.1115/1.4023182 · Cited by 104
Federsel, K., Wortmann, J., & Ladenberger, M. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.03.071 · Cited by 102
Ho, M., & Pan, C. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.11.015 · Cited by 60
High temperature corrosion in molten solar salt: The role of chloride impurities
Dorcheh, A. S., Durham, R., & Galetz, M. C. (2017) · Materials and Corrosion · doi:10.1002/maco.201609300 · Cited by 53
Binary and Ternary Nitrate Solar Heat Transfer Fluids
Coscia, K., Elliott, T., Mohapatra, S. C., Öztekin, A., & Neti, S. (2013) · Journal of Solar Energy Engineering · doi:10.1115/1.4023026 · Cited by 47
NO x emissions and NO 2 - formation in thermal energy storage process of binary molten nitrate salts
Wei, X., Wang, Y., Peng, Q., Yang, J., Yang, X., & Ding, J. (2014) · Energy · doi:10.1016/j.energy.2014.05.064 · Cited by 45
Lopez-Gonzalez, D., Valverde, J. L., Sánchez, P., & Sánchez-Silva, L. (2013) · Energy · doi:10.1016/j.energy.2013.01.056 · Cited by 38
Janz, G. J., & Truong, G. N. (1983) · Journal of Chemical & Engineering Data · doi:10.1021/je00032a022 · Cited by 33
Assessment of Novel Inorganic Storage Medium with Low Melting Point
Pfleger, N. A., Braun, M., Eck, M., et al. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.03.186 · Cited by 10
Cited by
Dunstan, M. T., Donat, F., Bork, A. H., Grey, C. P., & Müller, C. R. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00100 · Cited by 481
Advances in thermal energy storage: Fundamentals and applications
Ali, H. M., Rehman, T.-U., Arıcı, M., Said, Z., Duraković, B., Mohammed, H. I., Kumar, R., Rathod, M. K., Buyukdagli, O., & Teggar, M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101109 · Cited by 457
Ding, W., & Bauer, T. (2021) · Engineering · doi:10.1016/j.eng.2020.06.027 · Cited by 348
Self-citation
Metadata
- Authors
- Bonk, A., Sau, S., Uranga, N., Hernaiz, M., & Bauer, T.
- Venue
- Progress in Energy and Combustion Science
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 67
- Pages
- 69-87
- ISSN
- 0360-1285 (ISSN-L)
- OpenAlex
- W2793395603
- Cited by
- 272
- References
- 44
- FWCI
- 5.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.