The DOI matches its Crossref record; 6 of the 31 references it cites were found in a registry or an index.
Hot corrosion of materials: Fundamental studies
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“As with the thin aqueous layer on alloys in atmospheric corrosion, this molten salt layer is a pure ionic conductor which separates the alloys from the gas phase physically [1, 19, 47].”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [1]
In the citing paper
“These sulfate salts easily attach onto the surfaces of high temperature components and are melted to form a thin fused salt film at elevated temperatures.”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [1]
In the citing paper
“The predominant chemical reactant involved in hot corrosion has been confirmed to be sodium sulfate (Na2SO4), due to its extraordinary stability over a wide range of temperatures and oxygen partial pressures [1, 6, 19].”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [1]
In the citing paper
“The diagram demonstrates the good stability of Na2SO4 over a wide range of log and .”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [1]
In the citing paper
“In the O2-SO2-SO3 environment (Eq. (1)), the solubilities of both O2 and SO2 in molten salt are poor. In contrast, SO3 can dissolve in molten salt because of the formation of pyrosulfate ions through Eq. (2) [1, 19].”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [1]
2 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
(2006) · Electrochemistry and Corrosion Science · doi:10.1007/1-4020-7860-9_10 · Cited by 1,814
The Hot Corrosion of Metals by Molten Salts
Rapp, R. A. (1981) · ECS Proceedings Volumes · doi:10.1149/198110.0159pv · Cited by 136
Self-citationDeposition and Corrosion in Gas Turbines
Billingham, J. (1974) · British Corrosion Journal · doi:10.1179/000705974798321738 · Cited by 135
Rapp, R. A. (1989) · Studies in inorganic chemistry · doi:10.1016/b978-0-444-88534-0.50016-3 · Cited by 31
Self-citationHigh temperature corrosion and protection
Colson, J. C., Strafford, K. N., & Lambertin, M. (1986) · Journal de Chimie Physique · doi:10.1051/jcp/1986830745 · Cited by 27
Solubility of CeO2 in Molten Na2SO4–10 mol% NaVO3 Salt Solution at 900°C
Zhang, Y. S. (1994) · ECS Proceedings Volumes · doi:10.1149/199413.0171pv · Cited by 2
Self-citation
Research works printed but not linked: 69
- W.T. Reid, R.C. Corey, and BJ. Cross, Trans. ASME, 67 (1945), p. 279.
- F.J. Wall and S.T. Michael, ASTM Spec. Tech. Publ. STP 421 (1967), p. 223.
- K.J. Kohl et al., J. Electrochem. Soc., 126 (1979), p. 1054.
- K.L. Luthra and H.S. Spacil, J. Electrochem. Soc., 129 (1982), p. 649.
- E.L. Simons, G.V. Browning, and H.A. Liebhafsky, Corrosion, 11 (1955), p. 505.
- A.U. Seybolt, Trans. AIME, 242 (1968), p. 1955.
- N.S. Bornstein and M.A. DeCrescente, Trans. AIME, 245 (1969), p. 583.
- N.S. Bornstein and M.A. DeCrescente, Met. Trans.,2 (1971), p. 2875.
- J.A. Goebel and F.S. Pettit, Met. Trans., 1 (1970), p. 1943.
- J.A. Goebel, F.S. Pettit, and G.W. Goward, Met. Trans., 4 (1973), p. 261.
- J. Stringer, Annual Review of Materials Sci., 7, ed. R.A. Huggins (Palo Alto, CA: Annual Review Inc., 1977), p. 449.
- J. Stringer, Materials Sci. Techn., 3 (1987), p. 482.
- F.S. Pettit and C.S. Giggins, “Hot Corrosion,” Superalloys II, ed. C.T. Sims, N.S. Stoloff, and W.C. Hagel (New York: Wiley Publ., 1987), p. 327.
- R.A. Rapp, Corrosion, 42 (1986), p. 568.
- C.O. Park and R.A. Rapp, J. Electrochem. Soc., 133 (1986), p. 1636.
- D. Inman and D.M. Wrench, Brit. Corros. J., 1 (1966), p. 246.
- D.A. Shores and R.C. John, J. Appl. Electrochem., 10 (1980), p. 275.
- P.P. Leblanc and R.A. Rapp, J. Electrochem. Soc., 139 (1992), p. L31.
- P.P. Leblanc and R.A. Rapp, J. Electrochem. Soc., 140 (1993), p. L41.
- D.K. Gupta and R.A. Rapp, J. Electrochem. Soc., 127 (1980), p. 2194 and 2656.
- Y.S. Zhang and R.A. Rapp, J. Electrochem. Soc., 132 (1985), p. 734 and 2498.
- Y.S. Zhang, J. Electrochem. Soc., 133 (1986), p. 655.
- P.D. Jose, D.K. Gupta, and R.A. Rapp, J. Electrochem. Soc., 132 (1985), p. 735.
- D.Z. Shi and R.A. Rapp, J. Electrochem. Soc., 133 (1986), p. 849.
- M.L. Deanhardt and K.H. Stern, J. Electrochem. Soc., 128 (1981), p. 2577.
- A.K. Misra, D.P. Whittle, and W.L. Worrell, J. Electrochem. Soc., 129 (1982), p. 1840.
- M.L. Deanhardt and K.H. Stern, J. Electrochem. Soc., 129 (1982), p. 2228.
- N.S. Jacobson and J.L. Smialek, J. Amer. Ceram. Soc., 68 (1985), p. 432.
- N.S. Jacobson, J. Amer. Ceram. Soc., 76 (1993), p. 3.
- Y.S. Hwang and R.A. Rapp,J. Electrochem. Soc., 137 (1990), p. 1276.
- Y.S. Zhang and R.A. Rapp, Corrosion, 43 (1987), p. 348.
- Y.S. Hwang and R.A. Rapp, Corrosion, 45 (1989), p. 933.
- R.A. Rapp and Y.S. Zhang, “Electrochemical Studies of Hot Corrosion of Materials,” Proc Intern. Corr. Conf. (Merida, Mexico: 1993)
- R.L. Jones, D.B. Nordman, and S.T. Gadomski, Met. Trans., 16A (1985), p. 303.
- R.L. Jones, S.R. Jones, and C.E. Williams, J. Electrochem. Soc., 132 (1985), p. 1499.
- R.L. Jones, C.E. Williams, and S.R. Jones, J. Electrochem. Soc., 133 (1986), p. 227.
- R.L. Jones and D. Mess,J. Amer. Ceram. Soc., 75 (1992), p. 1818.
- R.L. Jones, High Temp. Tech., 6 (1988), p. 187.
- M. Seiersten and P. Kofstad, Mater. Sci. Tech., 3 (1987), p. 576.
- A.S. Nagelberg, J. Electrochem. Soc., 132 (1985), p. 2502.
- F. Mansfeld and J.V. Kenkel, Corr. Sci., 16 (1976), p. 111.
- F. Mansfeld and J.V. Kenkel, Corrosion, 33 (1977), p. 238.
- R. Andresen, J. Electrochem. Soc., 126 (1979), p. 328.
- D.A. Shores and W.C. Fang,J. Electrochem. Soc., 128 (1981), p. 346.
- W.C. Fang and R.A. Rapp,J. Electrochem. Soc., 130 (1983), p. 2335.
- H. Numata, A. Nishikata, and S. Haruyama, Proc. JIMIS-3, Trans. Japan Inst. Suppl. (1983), p. 303.
- X. Zheng and R.A. Rapp,J. Electrochem. Soc., 140 (1993), p. 2857.
- H. Numata and S. Haruyama, Corrosion, 44 (1988), p. 7249.
- J. Kupper and R.A. Rapp, Werkstoffe und Korrosion, 38 (1987), p. 674.
- J.C. Nava, D.Z. Shi, and R.A. Rapp, “Electrochemical Reactions of NaVO3 and Na2CO4 Solutes in Na2SO4,” High Temperature Materials Chemistry IV (Pennington, NJ: Electrochem. Soc., 1987), p. 1.
- D.Z. Shi and R.A. Rapp, Werkstoffe und Korrosion, 41 (1990), p. 215.
- D.A. Shores, Corrosion, 31 (1975), p. 434.
- A. Rahmel, M. Schmidt, and M. Schorr, Oxid. Metals, 18 (1982), p. 195.
- W.T. Wu, A. Rahmel, Oxid. Metals, 19 (1983), p. 201.
- W.T. Wu, A. Rahmel, and M. Schorr, Oxid. Metals, 22 (1984), p. 59.
- W.T. Wu, J. Zhang, and Y. Niu, Proc 11th Intern. Cong. Mater. Corr. (Florence, Italy, April 2–6,1990), p. 1475.
- N. Otsuka and R.A. Rapp, J. Electrochem. Soc., 137 (1990), p. 46.
- Y.M. Wu and R.A. Rapp, J. Electrochem. Soc., 138 (1991), p. 2683.
- G.C. Fryburg et al., J. Electrochem. Soc., 129 (1982), p. 571.
- G.C. Fryburg, F.J. Kohl, and C.A. Stearns, J. Electrochem. Soc., 131 (1984), p. 2985.
- K.L. Luthra and D.A. Shores, J. Electrochem. Soc., 127 (1980), p. 2202.
- K.L. Luthra, High Temperature Corrosion, NACE-6, ed. R.A. Rapp (Houston, TX: NACE, 1983), p. 507.
- K.L. Luthra, Met. Trans., 13A (1982), pp. 1647,1843, and 1853.
- K.L. Luthra and J.H. Wood, Thin Solid Films, 119 (1984), p. 271.
- Y.S. Zhang, L.Q. Shi, and S.T. Shih,J. Chin. Soc. Corr. Protec., 12 (1992), p. 189.
- Y.S. Zhang, X.M. Li, L.Q. Shi, and S.T. Shih, J. Chin. Soc. Corr. Protec, 11 (1991), p. 17.
- L.Q. Shi, Y.S. Zhang, and S.T. Shih, Corr. Sci., 33 (1992), p. 1427.
- L.Q. Shi, Y.S. Zhang, and S.T. Shih, Oxid. Metals, 38 (1992), p. 385.
- Y.S. Zhang, X.M. Li, T.L. Cao, and S.T. Shih, Corr. Sci. Protec Tech., 4 (1992), p. 9.
Cited by
Hot corrosion in gas turbine components
Eliaz, N., Shemesh, G., & Latanision, R. M. (2002) · Engineering Failure Analysis · doi:10.1016/s1350-6307(00)00035-2 · Cited by 695
“In addition to their own relatively low melting point, the vanadium compounds markedly increase the solubility of the oxide when mixed with Na 2 SO 4 [17].”
BackgroundThermal Barrier Coatings—A State of the Art Review
Thakare, J. G., Pandey, C., Mahapatra, M. M., & Mulik, R. S. (2020) · Metals and Materials International · doi:10.1007/s12540-020-00705-w · Cited by 365
Gas turbine coatings – An overview
Rajendran, R. (2012) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2012.07.007 · Cited by 331
Advanced heat transfer fluids for direct molten salt line-focusing CSP plants
Bonk, A., Sau, S., Uranga, N., Hernaiz, M., & Bauer, T. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.02.002 · Cited by 272
Corrosion of alloys in a chloride molten salt (NaCl-LiCl) for solar thermal technologies
Gomez-Vidal, J. C., & Tirawat, R. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.05.052 · Cited by 240
“The corrosion rate (CR) in millimeters per year can be calculated using the Stern-Geary equation through Faraday’s law [15,16]: 𝐶𝐶𝐶𝐶 = 𝜌𝜌 where K is a constant equal to 3272 [mm/(A·cm·year)], EW is the equivalent weight of the alloy [g/mole-e - ], and ρ is the alloy density [g/cm 3 ].”
Metadata
- Authors
- Rapp, R. A., & Zhang, Y.-S.
- Affiliations
- The Ohio State University (US)
- Venue
- JOM
- Published
- 1994-12
- Volume
- 46
- Issue
- 12
- Pages
- 47-55
- ISSN
- 0148-6608 (ISSN-L)
- 1047-4838
- 1543-1851
- OpenAlex
- W2324760338
- Cited by
- 247
- References
- 31
- Citations by year
- 2026: 17 · 2025: 13 · 2024: 9 · 2023: 11 · 2022: 12 · 2021: 16 · 2020: 15 · 2019: 14 · 2018: 11 · 2017: 13 · 2016: 11 · 2015: 9 · 2014: 10 · 2013: 11 · 2012: 6
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- Locations
- JOM (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Physical Sciences › Materials Science › Metals and Alloys › Metallurgical Processes and Thermodynamics
- Keywords
- hot corrosion, sodium sulfate, electrochemical corrosion mechanism, sodium metavanadate, electrochemical polarization, corrosion kinetics, alloy corrosion
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hot corrosion of materials: Fundamental studies. https://app.cochat.ai/papers/10.1007/bf03222665
- The paper
- Rapp, R. A., & Zhang, Y.-S. (1994). Hot corrosion of materials: Fundamental studies. JOM. https://doi.org/10.1007/bf03222665
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.