The DOI matches its Crossref record; 210 of the 210 references it cites were found in a registry or an index.
Thermochemical conversion of sewage sludge: A critical review
Abstract
The increasing levels of sewage sludge production demands research and development to introduce more commercially feasible options for reducing socio-economic and environmental problems associated with its current treatment. Sewage sludge may be processed to produce useful products or as a feedstock for energy generation. Initially, the characteristics of sewage sludge are discussed in terms of composition and the current options for its treatment with the associated environmental impacts. Processes to valorize sewage sludge are discussed, including heavy metal removal from sewage sludge, production of bio-char, production and use of activated carbon and use of sewage sludge combustion ash in cement and concrete. Thermochemical processes i.e., pyrolysis, co-pyrolysis and catalytic pyrolysis, also gasification and combustion for process intensification, energy and resource recovery from sewage sludge are then critically reviewed in detail. The pyrolysis of sewage sludge to produce a bio-oil is covered in relation to product bio-oil composition, reactor type and the use of catalysts. Gasification of sewage sludge focusses on the characteristics of the different available reactor types and the influence of a range of process parameters and catalysts on gas yield and composition. The selection and design of catalysts are of vital importance to enhance the selectivity of the selected thermochemical pyrolysis or gasification process. The catalysts used for sewage sludge treatment need more research to enable selectivity towards the targeted desired end-products along with optimization of parametric conditions and development of innovative reactor technologies. The combustion of sewage sludge is reviewed in terms of reactor technologies, flue gas cleaning systems and pollutant emissions. In addition, reactor technologies in terms of technological strength and market competitiveness with the particular application to sewage sludge are compared for the first time for thermochemical conversion. A critical comparison is made of the drying techniques, co-feedstocks and catalytic processes, reaction kinetics, reactor technologies, operating conditions to be optimized, removal of impurities, fuel properties, their constraints and required improvements. The emphasis of this review is to promote environmental sustainability for process intensification, energy and resource recovery from pyrolysis, gasification and combustion involving the use of catalysts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–210 of 210
Atienza‐Martínez, M., Rubio, I., Fonts, Ì., Ceamanos, J., & Gea, G. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.042 · Cited by 30
Boruszko, D. (2017) · Environmental Research · doi:10.1016/j.envres.2017.02.019 · Cited by 29
Tar-free fuel gas production from high temperature pyrolysis of sewage sludge
Zhang, L., Xiao, B., Hu, Z., Liu, S., Gong, C., He, P., & Sun, L. (2013) · Waste Management · doi:10.1016/j.wasman.2013.10.020 · Cited by 29
Arbeláez, P., Borrull, F., Marcé, R. M., & Pocurull, E. (2015) · Journal of Chromatography A · doi:10.1016/j.chroma.2015.07.001 · Cited by 25
Sewage sludge charcoal production by N 2 - and CO 2 -torrefaction
Hernández, A. B., Okonta, F., & Ntuli, F. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.08.001 · Cited by 22
Characterization of particulate matter formed during sewage sludge pyrolysis
Ko, J. H., Wang, J., & Xu, Q. (2018) · Fuel · doi:10.1016/j.fuel.2018.02.189 · Cited by 21
Pereira, C. P., Pereira, T. D. C., Gomes, G., Quintaes, B. R., Bila, D. M., & Campos, J. C. (2018) · Waste Management · doi:10.1016/j.wasman.2018.09.018 · Cited by 20
Lu, G., Liu, H., Zhang, Q., Wang, J., Yi, L., Hu, H., & Yao, H. (2019) · Fuel · doi:10.1016/j.fuel.2018.12.109 · Cited by 18
PCDD/F determination in sewage sludge composting. Influence of aeration and the presence of PCP
Muñoz, M., Garrido, M. A., Gomez-Rico, M. F., & Font, R. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.10.249 · Cited by 16
Pedroza, M. M., Souza, J. F., Vieira, G. E. G., & Bezerra, M. B. D. (2017) · Brazilian Journal of Petroleum and Gas · doi:10.5419/bjpg2017-0013 · Cited by 11
Cited by
Progress in biomass torrefaction: Principles, applications and challenges
Chen, W.-H., Lin, B.-J., Lin, Y.-Y., Chu, Y.-S., Ubando, A. T., Show, P. L., Ong, H. C., Chang, J.-S., Ho, S.-H., Culaba, A. B., et al. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100887 · Cited by 925
Feng, D., Guo, D., Zhang, Y., Sun, S., Zhao, Y., Shang, Q., Sun, H., Wu, J., & Tan, H. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127707 · Cited by 334
Saeidi, S., Najari, S., Hessel, V., Wilson, K., Keil, F. J., Concepción, P., Suib, S. L., & Rodrigues, A. E. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100905 · Cited by 327
Modified nickel-based catalysts for improved steam reforming of biomass tar: A critical review
Gao, N., Salisu, J., Quan, C., & Williams, P. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111023 · Cited by 308
Self-citationHuang, J., Veksha, A., Chan, W. P., Giannis, A., & Lisak, G. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111866 · Cited by 301
Metadata
- Authors
- Gao, N., Kamran, K., Quan, C., & Williams, P. T.
- Venue
- Progress in Energy and Combustion Science
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 79
- Pages
- 100843
- ISSN
- 0360-1285 (ISSN-L)
- OpenAlex
- W3011887938
- Cited by
- 763
- References
- 210
- FWCI
- 28.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.