The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
A review of petroleum emulsions and recent progress on water-in-crude oil emulsions stabilized by natural surfactants and solids
Abstract
Abstract During production of conventional as well as heavy oils, emulsions occur at well bore, in pipelines, and at surface facilities. As the production time of the oil wells increases, there will be an increased coproduction of oil and water in the form of emulsions. These emulsions are undesirable because they result in high pressure drop due to their high viscosity. They also cause serious corrosion problems due to presence of chlorides dissolved in water. These emulsions must be treated to meet production and transportation requirements, and to maximize the overall profitability of the crude oil production. Apart from the undesirable emulsions, the petroleum industry is witnessing a surge in the application of emulsions for beneficial processes. Both cases would be discussed in this review. This subject has experienced an extensive research over the years, with highly complicated theories regarding the phenomena involved in its formation (emulsification) and breaking (demulsification). Crude oils, irrespective of their origin, contain certain components or characteristics which tend to make them emulsifiable. These crude oil components are referred to as emulsifiers, and they vary so widely with the nature of the crude oil. The natural interfacially active components responsible for emulsion stability undoubtedly come from the resin and asphaltenes of the crude oil. However, the presence of other solids like crystalline waxes, clays, corrosion products and mineral scales may lead to the formation of very stable water-in-oil (w/o) emulsions. The nature of these particles controls the type as well as the stability of emulsions produced. Apart from the natural emulsifiers, chemical enhanced oil recovery (EOR) techniques have been reported to produce stable w/o and o/w emulsions. It is believed that the alkali, surfactant and polymers used in these techniques are responsible for these stable emulsions. When they form, these emulsions increase pumping costs, heighten the chances of pipeline and equipment erosion, corrosion rate, scaling and lower the produced oil API gravity. These emulsions have to be treated to remove the dispersed water and accompanying inorganic salts in order to meet market specifications, transportation requirement and to reduce corrosion and catalyst poisoning in downstream processing. Despite the huge and concerted efforts by researchers from the academia and the petroleum industry, there are few fundamental and applied investigations into the roles of native solids in combination to natural emulsifiers on the stabilization of petroleum emulsions. This paper presents a comprehensive overview of the progress made in the field of petroleum emulsions, principally the roles of particles in combination to asphaltene and resin in stabilizing w/o emulsions. The study also charts a way for emulsions studies that could lead to an effective demulsification via thorough characterizations of the solids believed to the enhancers of emulsion stability in order to tailor demulsifiers based on the characteristics of such emulsifiers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Particles as surfactants—similarities and differences
Binks, B. P. (2002) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(02)00008-0 · Cited by 3,691
Food Emulsions: Principles, Practice, and Techniques
McClements, D. J. (1998) · ScholarWorks@UMassAmherst (University of Massachusetts Amherst) · Cited by 2,476
Emulsions stabilised solely by colloidal particles
Aveyard, R., Binks, B. P., & Clint, J. H. (2003) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(02)00069-6 · Cited by 2,419
THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. II. LIQUIDS.1
Langmuir, I. (1917) · Journal of the American Chemical Society · doi:10.1021/ja02254a006 · Cited by 2,350
Ramsden, W. (1904) · Proceedings of the Royal Society of London · doi:10.1098/rspl.1903.0034 · Cited by 1,363
Crude-Oil Emulsions: A State-Of-The-Art Review
Kokal, S. (2005) · SPE Production & Facilities · doi:10.2118/77497-pa · Cited by 714
Catastrophic Phase Inversion of Water-in-Oil Emulsions Stabilized by Hydrophobic Silica
Binks, B. P., & Lumsdon, S. O. (2000) · Langmuir · doi:10.1021/la991081j · Cited by 690
Surfaces, Interfaces, and Colloids: Principles and Applications
Myers, D. (2002) · Wiley eBooks · doi:10.1002/0471234990 · Cited by 670
Pickering Emulsions: Interfacial Tension, Colloidal Layer Morphology, and Trapped-Particle Motion
Vignati, E., Piazza, R., & Lockhart, T. P. (2003) · Langmuir · doi:10.1021/la034264l · Cited by 635
Use of nanoparticles and microparticles in the formation and stabilization of food emulsions
Dickinson, E. (2012) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2011.09.006 · Cited by 603
Cited by
Remediation of soil and water contaminated with petroleum hydrocarbon: A review
Ossai, I. C., Ahmed, A., Hassan, A., & Hamid, F. S. (2020) · Environmental Technology & Innovation · doi:10.1016/j.eti.2019.100526 · Cited by 895
Loffredi, E., & Alamprese, C. (2024) · Food Reviews International · doi:10.1080/87559129.2023.2249098 · Cited by 28
Metadata
- Authors
- Umar, A. A., Saaid, I. B. M., Sulaimon, A. A., & Pilus, R. B. M.
- Venue
- Journal of Petroleum Science and Engineering
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 165
- Pages
- 673-690
- ISSN
- 0920-4105 (ISSN-L)
- OpenAlex
- W2794185535
- Cited by
- 399
- References
- 74
- FWCI
- 19.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review of petroleum emulsions and recent progress on water-in-crude oil emulsions stabilized by natural surfactants and solids. https://app.cochat.ai/papers/10.1016/j.petrol.2018.03.014
- The paper
- Umar, A. A., Saaid, I. B. M., Sulaimon, A. A., & Pilus, R. B. M. (2018). A review of petroleum emulsions and recent progress on water-in-crude oil emulsions stabilized by natural surfactants and solids. Journal of Petroleum Science and Engineering. https://doi.org/10.1016/j.petrol.2018.03.014
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.