The DOI matches its Crossref record.
The Effect of Curing Temperature on Physical and Chemical Properties of Geopolymers
Open accessAbstract
Fly ash–based geopolymers required heat to increase the geopolymerization process in order to obtain higher compressive strength. As such, geopolymer samples were prepared using different curing temperatures (room temperature, 50 °C, 60 °C, 70 °C, 80 °C), in which sodium silicate and NaOH were used as alkaline activators. The samples were cured for 24 hours in the oven and tested on the seventh day. The result revealed that the maximum compressive strength (67.04 MPa) was obtained at a temperature of 60 °C. However when the geopolymers sample cured at temperature more than 60 °C, the compressive strength decreased. From the FTIR spectra, the higher content of Si on sample cured at 60 °C also contributed to higher compressive strength. Moreover, SEM analysis showed a denser matrix as well as less unreacted fly ash of the sample cured at 60 °C compared to other temperatures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Atiş, C. D., Görür, E. B., Karahan, O., Bilim, C., İlkentapar, S., & Luga, E. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.089 · Cited by 329
Preparation and Properties of Alkali Activated Metakaolin-Based Geopolymer
Chen, L., Wang, Z., Wang, Y., & Feng, J. (2016) · Materials · doi:10.3390/ma9090767 · Cited by 263
Shihab, A. M., Abbas, J. M., & Ibrahim, A. M. (2018) · Civil Engineering Journal · doi:10.28991/cej-03091141 · Cited by 27
Metadata
- Authors
- Bakria, A. M. M. A., Kamarudin, H., BinHussain, M., Nizar, I. K., Zarina, Y., & Rafiza, A. R.
- Venue
- Physics Procedia
- Publisher
- Elsevier BV
- Published
- 2011
- Volume
- 22
- Pages
- 286-291
- ISSN
- 1875-3892 (ISSN-L)
- OpenAlex
- W2032505303
- Cited by
- 213
- References
- 0
- FWCI
- 7.40
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Effect of Curing Temperature on Physical and Chemical Properties of Geopolymers. https://app.cochat.ai/papers/10.1016/j.phpro.2011.11.045
- The paper
- Bakria, A. M. M. A., Kamarudin, H., BinHussain, M., Nizar, I. K., Zarina, Y., & Rafiza, A. R. (2011). The Effect of Curing Temperature on Physical and Chemical Properties of Geopolymers. Physics Procedia. https://doi.org/10.1016/j.phpro.2011.11.045
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.