The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Preparation and Properties of Alkali Activated Metakaolin-Based Geopolymer
Open accessAbstract
The effective activation and utilization of metakaolin as an alkali activated geopolymer precursor and its use in concrete surface protection is of great interest. In this paper, the formula of alkali activated metakaolin-based geopolymers was studied using an orthogonal experimental design. It was found that the optimal geopolymer was prepared with metakaolin, sodium hydroxide, sodium silicate and water, with the molar ratio of SiO2:Al2O3:Na2O:NaOH:H2O being 3.4:1.1:0.5:1.0:11.8. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) were adopted to investigate the influence of curing conditions on the mechanical properties and microstructures of the geopolymers. The best curing condition was 60 °C for 168 h, and this alkali activated metakaolin-based geopolymer showed the highest compression strength at 52.26 MPa. In addition, hollow micro-sphere glass beads were mixed with metakaolin particles to improve the thermal insulation properties of the alkali activated metakaolin-based geopolymer. These results suggest that a suitable volume ratio of metakaolin to hollow micro-sphere glass beads in alkali activated metakaolin-based geopolymers was 6:1, which achieved a thermal conductivity of 0.37 W/mK and compressive strength of 50 MPa. By adjusting to a milder curing condition, as-prepared alkali activated metakaolin-based geopolymers could find widespread applications in concrete thermal protection.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer
Rovnaník, P. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.12.023 · Cited by 1,020
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.03.013 · Cited by 605
Rashad, A. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.12.001 · Cited by 557
Physical evolution of Na-geopolymer derived from metakaolin up to 1000 °C
Duxson, P., Lukey, G. C., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0535-4 · Cited by 500
The heavy metal adsorption characteristics on metakaolin-based geopolymer
Cheng, T. W., Lee, M. L., Ko, M. S., Ueng, T. H., & Yang, S. F. (2012) · Applied Clay Science · doi:10.1016/j.clay.2011.11.027 · Cited by 456
The effect of temperature on the geopolymerization process of a metakaolin-based geopolymer
Muñiz-Villarreal, M. S., Manzano-Ramírez, A., Sampieri-Bulbarela, S., Gasca-Tirado, J. R., Reyes-Araiza, J. L., Rubio-Ávalos, J. C., Pérez-Bueno, J. J., Apatiga, L. M., Zaldivar-Cadena, A., & Amigó-Borrás, V. (2011) · Materials Letters · doi:10.1016/j.matlet.2010.12.049 · Cited by 257
Rahier, H., Van Mele, B., Biesemans, M., Wastiels, J., & Wu, X. (1996) · Journal of Materials Science · doi:10.1007/bf00355128 · Cited by 256
Factors affecting the performance of metakaolin geopolymers exposed to elevated temperatures
Kong, D. L. Y., Sanjayan, J. G., & Sagoe-Crentsil, K. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2205-6 · Cited by 251
Cited by
Chemical Stability and Leaching Behavior of One-Part Geopolymer from Soil and Coal Fly Ash Mixtures
Tigue, A. A. S., Malenab, R. A. J., Dungca, J. R., Yu, D. E. C., & Promentilla, M. A. B. (2018) · Minerals · doi:10.3390/min8090411 · Cited by 67
Öz, A., Bayrak, B., Kavaz, E., Kaplan, G., Çelebi, O., Alcan, H. G., & Aydın, A. C. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127923 · Cited by 55
Synthesis of a one-part geopolymer system for soil stabilizer using fly ash and volcanic ash
Tigue, A. A. S., Dungca, J. R., Hinode, H., Kurniawan, W., & Promentilla, M. A. B. (2018) · MATEC Web of Conferences · doi:10.1051/matecconf/201815605017 · Cited by 21
Metadata
- Authors
- Chen, L., Wang, Z., Wang, Y., & Feng, J.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2016-09-08
- Volume
- 9
- Issue
- 9
- Pages
- 767
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2513677084
- Cited by
- 263
- References
- 23
- FWCI
- 12.69
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation and Properties of Alkali Activated Metakaolin-Based Geopolymer. https://app.cochat.ai/papers/10.3390/ma9090767
- The paper
- Chen, L., Wang, Z., Wang, Y., & Feng, J. (2016). Preparation and Properties of Alkali Activated Metakaolin-Based Geopolymer. Materials. https://doi.org/10.3390/ma9090767
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.