The DOI matches its Crossref record; 402 of the 402 references it cites were found in a registry or an index.
Recent advances on the fundamental physical phenomena behind stability, dynamic motion, thermophysical properties, heat transport, applications, and challenges of nanofluids
Open accessAbstract
Abstract For more than two decades, nanotechnology’s rapid development have created quite a lot of prospects for scientists and engineers. Nanofluid is one of the remarkable consequences of such progression. Nanofluids are engineered by suspending nanoparticles with average sizes below 100 nm in traditional heat transfer fluids such as water, oil, and ethylene glycol. Nanofluids are considered to offer substantial advantages over conventional heat transfer fluids. When dispersed uniformly and suspended stably in base fluids, a minimal amount of nanoparticles can significantly improves the thermal properties of host fluids. Present work attempts to address this challenge considering state-of-the-art advances in understanding, characterizing, and mitigating issues about nanofluids’ stability. Stable and highly conductive nanofluids are produced generally by, one step and two step production methods. Both approaches of creating nanoparticle suspensions suffer from nanoparticles’ agglomeration, which is a critical issue in all technologies involving nanopowder. Therefore, numerous numerical models and the principal physical phenomena affecting the stability (fundamental physical principles that govern the interparticle interactions, clustering and deposition kinetics, and colloidal stability theories) have been analyzed. Concerning the particles’ dynamic motion, the importance of different forces in nanofluid flows that exist in particulate flows such as drag, lift (Magnus and Saffman), Brownian, thermophoretic, van der Waals, and electrostatic double-layer forces is considered. Moreover, an overview of nanofluids’ thermophysical properties, physical models, and heat transfer models is included in this work. To understand the unexpected discoveries and overcome classical models’ limitations, several investigators have proposed new physical concepts and mechanisms and developed new models to enhance the transport properties. In the present work, the wide-ranging structural evolution of nanofluids has been discoursed thoroughly by sketching out a gargantuan depiction of the diminutive biosphere of nanofluids through a brief review of some foremost chronological milestone such as the concepts of nanofluids, the preparations and performances of nanofluids, conductivity, viscosity, and density correlations of nanofluids, and potential applications and benefits of nanofluids. Also, different kinds of modeling and essential slip mechanisms of constructing heat transfer modeling of nanofluids have been discussed comprehensively in this study. Potential novel 2D materials as nanofluids have also been discussed and reported. A brief overview of the potential applications utilizing nanofluids has been reviewed, and future research gaps have been reported. Furthermore, recommendations were drawn regarding current knowledge gaps and future research directions to overcome the physical phenomenon, stability, thermophysical properties, overview of some applications, and the limitations hindering these nanofluids’ deployment. The review is presumed to be valuable for scholars and researchers working in the area of numerical simulations of nanofluids and experimental aspects and helps them understand the fundamental physical phenomena taking place during these numerical simulations and experiments and explores the potential of nanofluids both in academia and industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–400 of 402
Bakthavatchalam, B., Habib, K., Saidur, R., Saha, B. B., & Irshad, K. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.112787 · Cited by 284
Preparation Techniques of TiO2 Nanofluids and Challenges: A Review
Ali, H., Babar, H., Shah, T., Sajid, M., Qasim, M., & Javed, S. (2018) · Applied Sciences · doi:10.3390/app8040587 · Cited by 283
Self-citationInvestigation of thermal and electrical conductivity of graphene based nanofluids
Baby, T. T., & Ramaprabhu, S. (2010) · Journal of Applied Physics · doi:10.1063/1.3516289 · Cited by 278
Sundar, L. S., Farooky, M. H., Sarada, S. N., & Singh, M. K. (2013) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2012.11.004 · Cited by 278
Self-citationA Treatise on Electricity and Magnetism, Vol. 2
Maxwell, J. C. (2017) · Journal de Physique Théorique et Appliquée · Cited by 277
Numerical study of convective heat transfer of nanofluids: A review
Vanaki, S. M., Ganesan, P., & Mohammed, H. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.042 · Cited by 277
Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems
Rehman, T.-U., Ali, H. M., Saieed, A., Pao, W., & Ali, M. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.07.120 · Cited by 274
Self-citationRheological characteristics of non-Newtonian nanofluids: Experimental investigation
Hojjat, M., Etemad, S. G., Bagheri, R., et al. (2010) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2010.11.019 · Cited by 273
A numerical study of nanofluid forced convection in ribbed channels
Manca, O., Nardini, S., & Ricci, D. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.11.030 · Cited by 269
Esfe, M. H., Alirezaie, A., & Rejvani, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.09.091 · Cited by 268
Sadri, R., Ahmadi, G., Togun, H., Dahari, M., Kazi, S. N., Sadeghinezhad, E., & Zubir, N. (2014) · Nanoscale Research Letters · doi:10.1186/1556-276x-9-151 · Cited by 264
Venu, H., & Madhavan, V. (2016) · Fuel · doi:10.1016/j.fuel.2016.08.046 · Cited by 263
Characterization of Nanomaterials
Mudalige, T., Qu, H., Van Haute, D., Ansar, S. M., Paredes, A., & Ingle, T. (2019) · Nanomaterials for Food Applications · doi:10.1016/b978-0-12-814130-4.00011-7 · Cited by 261
The effect of particle size on the effective thermal conductivity of Al2O3-water nanofluids
Li, C. H., & Peterson, G. P. (2007) · Journal of Applied Physics · doi:10.1063/1.2436472 · Cited by 260
Kumaresan, V., & Velraj, R. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.07.017 · Cited by 256
A model of thermal conductivity of nanofluids with interfacial shells
Xue, Q., & Xu, W.-M. (2005) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2004.05.029 · Cited by 256
Enhanced Specific Heat of Silica Nanofluid
Shin, D., & Banerjee, D. (2011) · Journal of Heat Transfer · doi:10.1115/1.4002600 · Cited by 256
Solar Energy Harvesting Using Nanofluids-Based Concentrating Solar Collector
Khullar, V., Tyagi, H., Phelan, P. E., Otanicar, T. P., Singh, H., & Taylor, R. A. (2012) · Journal of Nanotechnology in Engineering and Medicine · doi:10.1115/1.4007387 · Cited by 253
Vafaei, M., Afrand, M., Sina, N., Kalbasi, R., Sourani, F., & Teimouri, H. (2017) · Physica E: Low-dimensional Systems and Nanostructures · doi:10.1016/j.physe.2016.08.020 · Cited by 253
Said, Z., Hachicha, A. A., Aberoumand, S., Yousef, B. A. A., Sayed, E. T., & Bellos, E. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100898 · Cited by 252
Self-citationRostamian, S. H., Biglari, M., Saedodin, S., et al. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.02.015 · Cited by 250
Ettefaghi, E., Ahmadi, H., Rashidi, A., et al. (2013) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2013.05.003 · Cited by 248
Electrically Insulating Thermal Nano-Oils Using 2D Fillers
Taha-Tijerina, J., Narayanan, T. N., Gao, G., Rohde, M., Tsentalovich, D. A., Pasquali, M., & Ajayan, P. M. (2012) · ACS Nano · doi:10.1021/nn203862p · Cited by 247
Effects of surfactant on the stability and thermal conductivity of Al2O3/de-ionized water nanofluids
Xia, G., Jiang, H., Liu, R., & Zhai, Y. (2014) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.05.004 · Cited by 246
Experimental stability analysis of different water-based nanofluids
Fedele, L., Colla, L., Bobbo, S., Barison, S., & Agresti, F. (2011) · Nanoscale Research Letters · doi:10.1186/1556-276x-6-300 · Cited by 246
Sundar, L. S., Naik, M. T., Sharma, K. V., Singh, M. K., & Reddy, T. C. S. (2011) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2011.10.004 · Cited by 245
Self-citationHosseinzadeh, M., Sardarabadi, M., & Passandideh-Fard, M. (2018) · Energy · doi:10.1016/j.energy.2018.01.073 · Cited by 244
Ghosh, A., Rao, K. V., George, S. J., & Rao, C. N. R. (2010) · Chemistry – A European Journal · doi:10.1002/chem.200902828 · Cited by 242
Munkhbayar, B., Tanshen, M. R., Jeoun, J., Chung, H., & Jeong, H. (2013) · Ceramics International · doi:10.1016/j.ceramint.2013.01.069 · Cited by 240
Esfe, M. H., Afrand, M., Yan, W., et al. (2016) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2016.05.015 · Cited by 239
Recent developments on viscosity and thermal conductivity of nanofluids
Yang, L., Xu, J., Du, K., & Zhang, X. (2017) · Powder Technology · doi:10.1016/j.powtec.2017.04.061 · Cited by 238
Hemmat Esfe, M., Saedodin, S., Mahian, O., & Wongwises, S. (2014) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-014-3771-x · Cited by 237
Ho, M. X., & Pan, C. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.10.078 · Cited by 235
Direct vapor generation through localized solar heating via carbon-nanotube nanofluid
Wang, X., He, Y., Cheng, G., Shi, L., Liu, X., & Zhu, J. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.10.049 · Cited by 234
Mwesigye, A., Huan, Z., & Meyer, J. P. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.04.106 · Cited by 231
Baghbanzadeh, M., Rashidi, A., Rashtchian, D., Lotfi, R., & Amrollahi, A. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.09.006 · Cited by 229
Synthesis and thermal conductivity characteristic of hybrid nanofluids – A review
Leong, K. Y., Ku Ahmad, K. Z., Ong, H. C., Ghazali, M. J., & Baharum, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.068 · Cited by 226
Liu, Z.-H., Hu, R.-L., Lu, L., Zhao, F., & Xiao, H.-S. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.04.010 · Cited by 221
Review of the mechanisms responsible for heat transfer enhancement using nanofluids
Pinto, R. V., & Fiorelli, F. A. S. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.147 · Cited by 218
Synthesis and nanofluid application of silver nanoparticles decorated graphene
Baby, T. T., & Ramaprabhu, S. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04106h · Cited by 215
Oh, D.-W., Jain, A., Eaton, J. K., Goodson, K. E., & Lee, J. S. (2008) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2008.04.007 · Cited by 215
Eshgarf, H., & Afrand, M. (2016) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.03.015 · Cited by 215
Synthesis and Transport Properties of Metal Oxide Decorated Graphene Dispersed Nanofluids
Baby, T. T., & Sundara, R. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp200273g · Cited by 215
Wang, X., He, Y., Liu, X., Shi, L., & Zhu, J. (2017) · Solar Energy · doi:10.1016/j.solener.2017.08.015 · Cited by 214
Mingzheng, Z., Guodong, X., Jian, L., Lei, C., & Lijun, Z. (2012) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2011.07.014 · Cited by 212
Thermal conductivity enhancement of nanofluids containing graphene nanosheets
Sen Gupta, S., Manoj Siva, V., Krishnan, S., Sreeprasad, T. S., Singh, P. K., Pradeep, T., & Das, S. K. (2011) · Journal of Applied Physics · doi:10.1063/1.3650456 · Cited by 212
Goshayeshi, H. R., Safaei, M. R., Goodarzi, M., et al. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.08.007 · Cited by 211
Yiamsawas, T., Mahian, O., Dalkılıç, A. S., et al. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.068 · Cited by 210
Chamsa-ard, W., Brundavanam, S., Fung, C., Fawcett, D., & Poinern, G. (2017) · Nanomaterials · doi:10.3390/nano7060131 · Cited by 210
Ho, C. J., Huang, J. B., Tsai, P. S., et al. (2010) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2009.12.007 · Cited by 209
Brownian movement and thermophoresis of nanoparticles in liquids
Michaelides, E. E. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.10.019 · Cited by 209
Sahota, L., & Tiwari, G. N. (2016) · Desalination · doi:10.1016/j.desal.2016.02.039 · Cited by 209
Asadi, M., & Asadi, A. (2016) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2016.05.019 · Cited by 207
Paul, G., Philip, J., Raj, B., Das, P. K., & Manna, I. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.02.044 · Cited by 206
Thermal conductivity and specific heat capacity measurements of CuO nanofluids
Barbés, B., Páramo, R., Blanco, E., & Casanova, C. (2014) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3518-0 · Cited by 206
A review of studies using nanofluids in flat-plate and direct absorption solar collectors
Raj, P., & Subudhi, S. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.012 · Cited by 205
O'Hanley, H., Buongiorno, J., McKrell, T., & Hu, L.-W. (2012) · Advances in Mechanical Engineering · doi:10.1155/2012/181079 · Cited by 201
Sheikholeslami, M., Jafaryar, M., Said, Z., Alsabery, A. I., Babazadeh, H., & Shafee, A. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115935 · Cited by 201
Self-citationEffect of suspending hybrid nano-additives on rheological behavior of engine oil and pumping power
Dardan, E., Afrand, M., & Meghdadi Isfahani, A. H. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.08.103 · Cited by 199
Moraveji, M. K., & Ardehali, R. M. (2013) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2013.02.012 · Cited by 198
Venu, H., Raju, V. D., Subramani, L., & Soudagar, M. E. M. (2020) · Energy · doi:10.1016/j.energy.2020.119091 · Cited by 197
Thermal conductivity of ethylene glycol and water mixture based Fe3O4 nanofluid
Sundar, L. S., Singh, M. K., & Sousa, A. C. M. (2013) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2013.08.026 · Cited by 196
Self-citationPerformance analysis of a minichannel-based solar collector using different nanofluids
Mahian, O., Kianifar, A., Şahin, A. Z., et al. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.08.021 · Cited by 193
Toghraie, D., Alempour, S. M., & Afrand, M. (2016) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2016.05.092 · Cited by 192
Role of Nanofluids in Drug Delivery and Biomedical Technology: Methods and Applications
Sheikhpour, M., Arabi, M., Kasaeian, A., Rokn Rabei, A., & Taherian, Z. (2020) · Nanotechnology, Science and Applications · doi:10.2147/nsa.s260374 · Cited by 191
Said, Z., Rahman, S. M. A., Assad, M. E. H., & Alami, A. H. (2018) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2018.12.020 · Cited by 186
Self-citationExperimental study on thermal conductivity of DWCNT-ZnO/water-EG nanofluids
Esfe, M. H., Yan, W., Akbari, M., et al. (2015) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2015.09.001 · Cited by 181
Current trends in surface tension and wetting behavior of nanofluids
Estellé, P., Cabaleiro, D., Żyła, G., Lugo, L., & Murshed, S. M. S. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.07.006 · Cited by 181
Kakaç, S., & Pramuanjaroenkij, A. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.09.021 · Cited by 179
Zhang, X., Gu, H., & Fujii, M. (2006) · Journal of Applied Physics · doi:10.1063/1.2259789 · Cited by 176
Analysis of single phase, discrete and mixture models, in predicting nanofluid transport
Albojamal, A., & Vafai, K. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.06.030 · Cited by 173
Principles of Colloid and Surface Chemistry, Revised and Expanded
Hiemenz, P. C., & Rajagopalan, R. (1997) · doi:10.1201/9781482273236 · Cited by 173
Amrollahi, A., Hamidi, A. A., & Rashidi, A. M. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/31/315701 · Cited by 172
Baratpour, M., Karimipour, A., Afrand, M., et al. (2016) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2016.02.008 · Cited by 170
Factors affecting the performance of hybrid nanofluids: A comprehensive review
Hamzah, M. H., Sidik, N. A. C., Ken, T. L., Mamat, R., & Najafi, G. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.07.021 · Cited by 170
Poh, T. Y., Ali, N. A. B. M., Mac Aogáin, M., Kathawala, M. H., Setyawati, M. I., Ng, K. W., & Chotirmall, S. H. (2018) · Particle and Fibre Toxicology · doi:10.1186/s12989-018-0282-0 · Cited by 169
Critical Issues in Nanofluids Preparation, Characterization and Thermal Conductivity
Wu, D., Zhu, H., Wang, L., & Liu, L. (2009) · Current Nanoscience · doi:10.2174/157341309787314548 · Cited by 168
Batmunkh, M., Tanshen, M. R., Nine, M. J., et al. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie403712f · Cited by 168
Soares, P. I. P., Laia, C. A. T., Carvalho, A., Pereira, L. C. J., Coutinho, J. T., Ferreira, I. M. M., Novo, C. M. M., & Borges, J. P. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.04.181 · Cited by 167
Harikrishnan, S., Magesh, S., & Kalaiselvam, S. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.05.001 · Cited by 166
Evacuated tube solar collector performance using CeO2/water nanofluid
Sharafeldin, M. A., & Gróf, G. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.054 · Cited by 165
Said, Z., Arora, S., & Bellos, E. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.06.010 · Cited by 164
Self-citationThermal conductivity and specific heat capacity measurements of Al2O3 nanofluids
Barbés, B., Páramo, R., Blanco, E., Pastoriza-Gallego, M. J., Piñeiro, M. M., Legido, J. L., & Casanova, C. (2013) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-012-2534-9 · Cited by 163
Demir, H., Dalkilic, A. S., Kürekci, N. A., Duangthongsuk, W., & Wongwises, S. (2011) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2010.12.009 · Cited by 160
Asadi, A., Asadi, M., Siahmargoi, M., et al. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.12.022 · Cited by 160
A comprehensive review on pool boiling of nanofluids
Çiloğlu, D., & Bölükbaşi, A. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.03.063 · Cited by 159
Investigation of Al2O3-MWCNTs Hybrid Dispersion in Water and Their Thermal Characterization
Nine, M. J., Batmunkh, M., Kim, J.-H., et al. (2012) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2012.6193 · Cited by 156
Kurt, H., & Kayfeci, M. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.12.020 · Cited by 153
Lari, M. O., & Şahin, A. Z. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.045 · Cited by 152
Potential applications of nanotechnology in transportation: A review
Mathew, J., Joy, J., & George, S. C. (2018) · Journal of King Saud University - Science · doi:10.1016/j.jksus.2018.03.015 · Cited by 152
Esfe, M. H., & Saedodin, S. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-014-4197-1 · Cited by 151
Hosseini, S. M., Safaei, M., Goodarzi, M., Al-Rashed, A., & Nguyen, T. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.06.061 · Cited by 150
Pool boiling heat transfer of CNT/water nanofluids
Amiri, A., Shanbedi, M., Amiri, H., Heris, S. Z., Kazi, S. N., Chew, B. T., & Eshghi, H. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.06.064 · Cited by 147
Synthesis and Characterization of Monodispersed Copper Colloids in Polar Solvents
Yu, W., Xie, H., Chen, L., Li, Y., & Zhang, C. (2009) · Nanoscale Research Letters · doi:10.1007/s11671-009-9264-3 · Cited by 147
Botha, S. S., Ndungu, P. G., & Bladergroen, B. J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie101088x · Cited by 147
Said, Z., Saidur, R., Sabiha, M. A., et al. (2015) · Solar Energy · doi:10.1016/j.solener.2015.02.037 · Cited by 146
Self-citationAkilu, S., Baheta, A., M.Said, M. A., Minea, A., & Sharma, K. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.10.027 · Cited by 146
Esfe, M. H., Afrand, M., Gharehkhani, S., Rostamian, H., Toghraie, D. S., & Dahari, M. (2016) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2016.05.013 · Cited by 145
Esfe, M. H., Esfandeh, S., Afrand, M., et al. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.11.131 · Cited by 143
An updated review on the influential parameters on thermal conductivity of nano-fluids
Yang, L., Ji, W., Huang, J.-N., & Xu, G. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.111780 · Cited by 140
Jang, J.-T., Lee, J., Seon, J., Ju, E., Kim, M., Kim, Y., Kim, M. G., Takemura, Y., Arbab, A. S., Kang, K. W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201704362 · Cited by 138
Tiwari, A. K., Kumar, V., Said, Z., & Paliwal, H. K. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126031 · Cited by 138
Self-citationAsadi, A., Asadi, M., Rezaniakolaei, A., Rosendahl, L., & Wongwises, S. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.074 · Cited by 136
Optical properties of metal oxides based nanofluids
Said, Z., Saidur, R., & Rahim, N. A. (2014) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2014.10.010 · Cited by 132
Self-citationSundar, L. S., Otero‐Irurueta, G., Ramana, E. V., Singh, M. K., & Sousa, A. C. M. (2016) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2016.03.001 · Cited by 132
Self-citationRasheed, A. K., Khalid, M., Javeed, A., Walvekar, R., Gupta, T. C. S. M., & Chan, A. (2016) · Tribology International · doi:10.1016/j.triboint.2016.08.007 · Cited by 132
Ferrouillat, S., Bontemps, A., Poncelet, O., Soriano, O., & Gruss, J. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.10.020 · Cited by 131
Specific heat of metal oxide nanofluids at high concentrations for heat transfer
Cabaleiro, D., Gracia‐Fernández, C., Legido, J. L., & Lugo, L. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.04.107 · Cited by 130
Kim, H., Kim, J., & Cho, H. (2016) · Energy · doi:10.1016/j.energy.2016.11.009 · Cited by 129
Kumar, A., Tiwari, A. K., & Said, Z. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101417 · Cited by 129
Self-citationApproaches to the safety assessment of engineered nanomaterials (ENM) in food
Cockburn, A., Bradford, R., Buck, N. R., Constable, A., Edwards, G., Haber, B., Hepburn, P., Howlett, J., Kampers, F. W. H., Klein, C. L., et al. (2011) · Food and Chemical Toxicology · doi:10.1016/j.fct.2011.12.029 · Cited by 128
Dependence of Nanofluid Viscosity on Particle Size and pH Value
Jia-Fei, Z., Zhong-Yang, L., Ni, M., et al. (2009) · Chinese Physics Letters · doi:10.1088/0256-307x/26/6/066202 · Cited by 125
Yazdanifard, F., Ebrahimnia-Bajestan, E., & Ameri, M. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.06.075 · Cited by 124
Dhahad, H. A., & Chaichan, M. T. (2020) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2020.100535 · Cited by 124
Cárdenas-Contreras, E. M., Oliveira, G. A., & Bandarra, Ê. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.12.014 · Cited by 123
Stability of Heat Transfer Nanofluids – A Review
Mukherjee, S., Mishra, P. C., & Chaudhuri, P. (2018) · ChemBioEng Reviews · doi:10.1002/cben.201800008 · Cited by 121
Nine, M. J., Munkhbayar, B., Rahman, M. S., et al. (2013) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2013.05.032 · Cited by 120
Experimental test of an innovative high concentration nanofluid solar collector
Colangelo, G., Favale, E., Miglietta, P., et al. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.05.031 · Cited by 117
Piacenza, E., Presentato, A., & Turner, R. J. (2018) · Critical Reviews in Biotechnology · doi:10.1080/07388551.2018.1440525 · Cited by 115
Colloid and Interface Science in Pharmaceutical Research and Development
(2014) · Elsevier eBooks · doi:10.1016/c2012-0-00845-9 · Cited by 113
Synthesis and characterization of copper nanofluid by a novel one-step method
Kumar, S. A., Meenakshi, K. S., Narashimhan, B. R. V., et al. (2008) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2008.07.027 · Cited by 112
Inhomogeneity in pore size appreciably lowering thermal conductivity for porous thermal insulators
Qiu, L., Zou, H., Tang, D., Wen, D., Feng, Y., & Zhang, X. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.11.066 · Cited by 111
Applications of nanomaterials in the different fields of photosciences
Mandal, G., & Ganguly, T. (2011) · Indian Journal of Physics · doi:10.1007/s12648-011-0149-9 · Cited by 110
Condensation of laminar film over curved vertical walls using single and two-phase nanofluid models
Türkyılmazoğlu, M. (2017) · European Journal of Mechanics - B/Fluids · doi:10.1016/j.euromechflu.2017.04.007 · Cited by 109
Sonawane, S. S., Khedkar, R., & Wasewar, K. (2015) · Journal of Experimental Nanoscience · doi:10.1080/17458080.2013.832421 · Cited by 108
Measurements of the surface tension of nanofluids and development of a new correlation
Chinnam, J., Das, D. K., Vajjha, R. S., et al. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.07.008 · Cited by 107
Buonomo, B., Manca, O., Marinelli, L., & Nardini, S. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.077 · Cited by 105
Molecular dynamics modeling of thermal conductivity enhancement in metal nanoparticle suspensions
Sankar, N., Mathew, N., & Sobhan, C. B. P. (2008) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2008.03.006 · Cited by 104
Bahiraei, M., Nazari, S., Moayedi, H., & Safarzadeh, H. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.02.055 · Cited by 103
Colla, L., Fedele, L., Scattolini, M., & Bobbo, S. (2011) · Advances in Mechanical Engineering · doi:10.1155/2012/674947 · Cited by 101
Influence of dissolved oxygen on aggregation kinetics of citrate-coated silver nanoparticles
Zhang, W., Ying, Y., Li, K., Huang, Y., & Chen, Y. (2011) · Environmental Pollution · doi:10.1016/j.envpol.2011.07.013 · Cited by 101
Asnida, M., Hisham, S., Awang, N. W., Amirruddin, A. K., Noor, M. M., Kadirgama, K., Ramasamy, D., Najafi, G., & Tarlochan, F. (2017) · Fuel · doi:10.1016/j.fuel.2017.10.002 · Cited by 101
Techniques to improve the performance of enhanced condensation area solar still: A critical review
Patel, S. K., & Modi, K. V. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122260 · Cited by 99
Yeganeh, M., Shahtahmasebi, N., Kompany, A., Goharshadi, E. K., Youssefi, A., & Šiller, L. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.03.008 · Cited by 98
Kwek, D., Crivoi, A., & Duan, F. (2010) · Journal of Chemical & Engineering Data · doi:10.1021/je1006407 · Cited by 98
Baby, T. T., & Ramaprabhu, S. (2011) · Nanoscale · doi:10.1039/c0nr01024c · Cited by 97
Anghel, I., Grumezescu, A. M., Holban, A. M., Ficai, A., Anghel, A. G., & Chifiriuc, M. C. (2013) · International Journal of Molecular Sciences · doi:10.3390/ijms140918110 · Cited by 96
Żyła, G., Vallejo, J. P., Fal, J., & Lugo, L. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.01.073 · Cited by 96
Effects of aggregation on the thermal conductivity of alumina/water nanofluids
Hong, J., & Kim, D. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2011.12.019 · Cited by 95
Second law analysis of a nanofluid-based solar collector using experimental data
Meibodi, S. S., Kianifar, A., Mahian, O., et al. (2016) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-016-5522-7 · Cited by 94
Thermal conductivity of interfacial layers in nanofluids
Liang, Z., & Tsai, H.-L. (2011) · Physical Review E · doi:10.1103/physreve.83.041602 · Cited by 93
Rheological Behaviors of Nanofluids Containing Multi-Walled Carbon Nanotube
Chen, L., Xie, H., Yu, W., et al. (2011) · Journal of Dispersion Science and Technology · doi:10.1080/01932691003757223 · Cited by 93
Sundar, L. S., Sintie, Y. T., Said, Z., Singh, M. K., Punnaiah, V., & Sousa, A. C. M. (2020) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2020.100772 · Cited by 93
Self-citationRobertis, E. D., Cosme, E. H. H., Neves, R. S., et al. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.01.003 · Cited by 92
Arora, S., Singh, H. P., Sahota, L., Arora, M. K., Arya, R., Singh, S., Jain, A., & Singh, A. K. (2020) · Desalination · doi:10.1016/j.desal.2020.114595 · Cited by 92
Thermal transport phenomena in nanoparticle suspensions
Cardellini, A., Fasano, M., Bigdeli, M. B., Chiavazzo, E., & Asinari, P. (2016) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/28/48/483003 · Cited by 91
Żyła, G., Fal, J., & Estellé, P. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.06.032 · Cited by 90
Said, Z., Sundar, L. S., Rezk, H., Nassef, A. M., Chakraborty, S., & Li, C. (2021) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2021.115659 · Cited by 90
Self-citationThermo-economic analysis of an integrated solar power generation system using nanofluids
Alashkar, A., & Gadalla, M. A. E. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.01.084 · Cited by 88
A review of the impact of preparation on stability of carbon nanotube nanofluids
Yazid, M. N. A. W. M., Sidik, N. A. C., Mamat, R., et al. (2016) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2016.09.021 · Cited by 87
Trimetallic Au/Pt/Ag based nanofluid for enhanced antibacterial response
Yadav, N., Jaiswal, A. K., Dey, K. K., Yadav, V. B., Nath, G., Srivastava, A. K., & Yadav, R. R. (2018) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2018.07.016 · Cited by 87
Process optimization and material properties for nanofluid manufacturing
Chang, H., Jwo, C. S., Fan, P. S., & Pai, S.-H. (2006) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0597-0 · Cited by 85
Harris, A., Kazachenko, S., Bateman, R., Nickerson, J. R., & Emanuel, M. (2014) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-014-3811-6 · Cited by 85
Wijenayaka, L. A., Ivanov, M. R., Cheatum, C. M., & Haes, A. J. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b00483 · Cited by 85
The sol-gel transition modelled by irreversible aggregation of clusters
Kolb, M., & Herrmann, H. J. (1985) · Journal of Physics A Mathematical and General · doi:10.1088/0305-4470/18/8/007 · Cited by 82
Thermophysical and optical properties of SWCNTs nanofluids
Said, Z. (2016) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2016.09.017 · Cited by 82
Self-citationTwo-dimensional Materials - Synthesis, Characterization and Potential Applications
Nayak, P. K. (2016) · InTech eBooks · doi:10.5772/64760 · Cited by 81
Żyła, G., Vallejo, J. P., & Lugo, L. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.04.012 · Cited by 80
Elsaid, A. M. (2019) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2019.05.009 · Cited by 80
Chen, L. F., Cheng, M., Yang, D. J., et al. (2014) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.548-549.118 · Cited by 78
Particle agglomeration and properties of nanofluids
Yang, Y., Oztekin, A., Neti, S., & Mohapatra, S. (2012) · Journal of Nanoparticle Research · doi:10.1007/s11051-012-0852-2 · Cited by 77
Tiwari, A. K., Pandya, N. S., Shah, H., & Said, Z. (2020) · Applied Nanoscience · doi:10.1007/s13204-020-01578-6 · Cited by 75
Self-citationBlock copolymer template-directed synthesis of well-ordered metallic nanostructures
Vuković, I., ten Brinke, G., & Loos, K. (2013) · Polymer · doi:10.1016/j.polymer.2013.03.013 · Cited by 73
Particle characterization and behavior relevant to fluidized bed combustion and gasification systems
Wang, D., & Fan, L. (2013) · Elsevier eBooks · doi:10.1533/9780857098801.1.42 · Cited by 72
Spin coating of a colloidal suspension
Zhao, Y., & Marshall, J. S. (2008) · Physics of Fluids · doi:10.1063/1.2896601 · Cited by 70
Johnson, P. L., Bassenne, M., & Moin, P. (2019) · Journal of Fluid Mechanics · doi:10.1017/jfm.2019.865 · Cited by 70
The effect of nanoparticles on laminar heat transfer in a horizontal tube
Utomo, A. T., Haghighi, E. B., Zavareh, A. I. T., Ghanbarpour, M., Poth, H., Khodabandeh, R., Palm, B. E., & Pacek, A. W. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.10.003 · Cited by 68
Heat and Mass Transfer in Fluids with Nanoparticle Suspensions
Peterson, G. P., & Li, C. H. (2006) · Advances in heat transfer · doi:10.1016/s0065-2717(06)39003-x · Cited by 65
A novel approach for enhancement of thermal conductivity of CuO/H2O based nanofluids
Nemade, K., & Waghuley, S. A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.11.053 · Cited by 64
Evaluation of particle interactions by in situ visualization of separation behaviour
Lerche, D., & Sobisch, T. (2014) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2012.10.015 · Cited by 63
Satti, J. R., Das, D. K., & Ray, D. R. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.11.065 · Cited by 61
Performance of multi-walled carbon nanotube-based nanofluid in turning operation
Raju, R. A., Andhare, A. B., & Sahu, N. K. (2017) · Materials and Manufacturing Processes · doi:10.1080/10426914.2017.1279291 · Cited by 57
DLVO forces in thin liquid films beyond the conventional DLVO theory
Boinovich, L. B. (2010) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2010.05.003 · Cited by 56
A pencil-like magnetoelectric sensor exhibiting ultrahigh coupling properties
Lin, L., Li, Y., Soh, A. K., & Li, F. (2013) · Journal of Applied Physics · doi:10.1063/1.4798509 · Cited by 56
Viscosity of carbon nanotube/water nanofluid
Jabbari, F., Rajabpour, A., & Saedodin, S. (2018) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-018-7458-6 · Cited by 54
Thermal conductivity of Al2O3 + TiO2/water nanofluid: Model development and experimental validation
Charab, A. A., Movahedirad, S., & Norouzbeigi, R. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.03.059 · Cited by 53
Mehmood, A., Waqas, A., Said, Z., Rahman, S. M. A., & Akram, M. R. (2019) · Energy Reports · doi:10.1016/j.egyr.2019.10.002 · Cited by 51
Self-citationAnomalous enhancement in thermal conductivity of nanofluid induced by solid walls in a nanochannel
Sun, C., Lu, W., Bai, B., et al. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.07.021 · Cited by 50
Li, X., Chen, W., & Zou, C. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2019.110240 · Cited by 50
Sharaf, O. Z., Al-Khateeb, A. N., Kyritsis, D. C., & Abu‐Nada, E. (2019) · Journal of Fluid Mechanics · doi:10.1017/jfm.2019.606 · Cited by 48
Processing of polymer nanocomposites
Gou, J., Zhuge, J., & Liang, F. (2012) · Elsevier eBooks · doi:10.1533/9780857096258.1.95 · Cited by 47
Bagaria, H. G., Neilson, B. M., Worthen, A. J., Xue, Z., Yoon, K. Y., Cheng, V., Lee, J. H., Velagala, S., Huh, C., Bryant, S. L., et al. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.01.056 · Cited by 45
One-Pot Hydrothermal Conversion of Cellulose into Organic Acids with CuO as an Oxidant
Wang, F., Wang, Y., Jin, F., Yao, G., Huo, Z., Zeng, X., & Jing, Z. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie404311d · Cited by 44
Heat and Mass Transfer in Particulate Suspensions
Michaelides, E. E. S. (2013) · SpringerBriefs in applied sciences and technology · doi:10.1007/978-1-4614-5854-8 · Cited by 44
Zhang, Z., Yuan, Y., Ouyang, L., Sun, Q., Cao, X., & Alelyani, S. M. (2016) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-016-6050-1 · Cited by 42
Iqbal, M., Lyon, B. A., Ureña-Benavides, E. E., Moaseri, E., Fei, Y., McFadden, C., Javier, K. J., Ellison, C. J., Pennell, K. D., & Johnston, K. P. (2017) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2017.01.080 · Cited by 42
Putting Liquids Under Molecular-Scale Confinement
Israelachvili, J. N., & Gourdon, D. (2001) · Science · doi:10.1126/science.1061206 · Cited by 41
Piquot, J., Nithiyanantham, U., Grosu, Y. G., & Faik, A. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2019.110024 · Cited by 41
Numerical study on the thermo-hydraulic performance analysis of fly ash nanofluid
Kanti, P. K., Sharma, K. V., Said, Z., & Bellos, E. (2021) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-10533-0 · Cited by 40
Self-citationSaha, G., & Paul, M. C. (2018) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2018.03.001 · Cited by 39
Berrada, N., Hamze, S., Desforges, A., Ghanbaja, J., Gleize, J., Maré, T., Vigolo, B., & Estellé, P. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.111473 · Cited by 39
Stability testing of silver nanodisc suspensions for solar applications
Taylor, R. A., Hjerrild, N. E., Duhaini, N., Pickford, M., & Mesgari, S. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.05.201 · Cited by 36
Zagabathuni, A., Michael, M., Pabi, S. K., & Ghosh, S. (2018) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2018.02.005 · Cited by 35
Thermal and Electrical Properties of a Suspended Nanoscale Thin Film
Zhang, X., Xie, H., Fujii, M., et al. (2006) · International Journal of Thermophysics · doi:10.1007/s10765-006-0135-1 · Cited by 34
Ganesan, V., Cindrella, L., & Shima, P. D. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b12043 · Cited by 33
Fabrication Of High Stable Gold Nanofluid By Pulsed Laser Ablation In Liquids
Torres–Mendieta, R., & Mondrag, R. (2015) · Advanced Materials Letters · doi:10.5185/amlett.2015.6038 · Cited by 19
Hybrid nanofluids preparation method
Afrand, M., & Ranjbarzadeh, R. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819280-1.00002-1 · Cited by 17
On the deduction of the Equation of State from Boltzmann's Entropy Principle
Keesom, W. H. (1912) · Koninklijke Nederlandse Akademie van Wetenschappen Proceedings Series B Physical Sciences · Cited by 15
Light-induced latent heat reduction of silver nanofluids: A molecular dynamics simulation
Zhao, C., An, W., & Gao, N. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120343 · Cited by 11
Performance of Concentrated Photovoltaic Cells Using Various Microchannel Heat Sink Designs
Radwan, A., Ahmed, M. A., & Ookawara, S. A. (2016) · ASME International Conference on Energy Sustainability (ES) · doi:10.1115/es2016-59411 · Cited by 8
Metadata
- Authors
- Said, Z., Sundar, L. S., Tiwari, A. K., Ali, H. M., Sheikholeslami, M., Bellos, E., & Babar, H.
- Venue
- Physics Reports
- Publisher
- Elsevier BV
- Published
- 2022-02
- Volume
- 946
- Pages
- 1-94
- ISSN
- 0370-1573 (ISSN-L)
- OpenAlex
- W3187032487
- Cited by
- 391
- References
- 402
- FWCI
- 19.81
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.