CoChat
Sign Up
Cited by 675High-Temperature Coating BehaviorsChemical Looping and Thermochemical ProcessesAdvancements in Solid Oxide Fuel Cells

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

The oxidation behaviour of metals and alloys at high temperatures in atmospheres containing water vapour: A review

Saunders, S.R.J., Monteiro, M., Rizzo, F.·2008·Progress in Materials Science
DOI 10.1016/j.pmatsci.2007.11.001
Open this paper in CoChat — free account

Overview

Integrity signals

Registry

Crossref · 10.1016/j.pmatsci.2007.11.001

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 1 references

Research works printed but not linked: 145

  1. Larring, 2003, HT corrosion of Cr–5wt%Fe–1wt% Y2O3 alloy and conductivity of the oxide scale – effects of water vapor, J Electrochem Soc, 150, B374, 10.1149/1.1587726 · DOI
  2. Douglass, 1996, International workshop on high temperature oxidation – subject area 1: the role of water vapour in the oxidation of metals and alloys, Oxid Met, 45, 529, 10.1007/BF01046850 · DOI
  3. Buscail, 1997, Water-vapor-effect on the oxidation of Fe 21.5wt.% Cr, 5.6wt.%Al at 1000°C, Oxid Met, 47, 445, 10.1007/BF02134786 · DOI
  4. Al-Badairy, 2000, The influence of the moisture content of the atmosphere on alumina scale formation and growth during high temperature oxidation of PM2000, Mater High Temp, 17, 133, 10.1179/mht.2000.020 · DOI
  5. Boggs, 1977, The oxidation of iron aluminium alloys from 450°C to 900°C, J Electrochem Soc, 118, 906, 10.1149/1.2408222 · DOI
  6. Onal, 2003, Water vapor effects on the cyclic oxidation resistance of alumina forming alloys, Mater High Temp, 20, 81, 10.1179/mht.2003.039 · DOI
  7. Janakiraman, 1999, The effect of water vapor on the oxidation of alloys that develop alumina scales for protection, Metall Mater Trans A, 30A, 2905, 10.1007/s11661-999-0128-3 · DOI
  8. Smialek, 2002, Delayed alumina scale spallation on Rene’N5+Y: moisture effects and acoustic emission, Mater Sci Eng, A332, 11, 10.1016/S0921-5093(01)01712-9 · DOI
  9. Kvernes, 1977, High temperature oxidation of Fe13CrxAl alloys in Air/H2O vapour mixtures, Corrosion Sci, 17, 237, 10.1016/0010-938X(77)90049-X · DOI
  10. Regina, 2004, The effect of water vapor on passive-layer stability and corrosion behavior of Fe–Al–Cr base alloys, Oxid Met, 61, 69, 10.1023/B:OXID.0000016277.86061.25 · DOI
  11. Regina, 2005, Gaseous corrosion resistance of Fe–Al based alloys containing Cr additions. Part II: Scale morphology, Mater Sci Eng A, 405, 102, 10.1016/j.msea.2005.05.085 · DOI
  12. Zhang, 2004, The effect of water vapor on the oxidation behavior of CVD iron–aluminide coatings, Oxid Met, 62, 103, 10.1023/B:OXID.0000038788.02094.cb · DOI
  13. Zhou, 2002, Influence of water vapor on the isothermal oxidation behavior of low pressure plasma sprayed NiCrAlY coating at high temperature, Surf Coat Technol, 161, 86, 10.1016/S0257-8972(02)00398-5 · DOI
  14. Leyens, 1996, Oxide scale formation on an MCrAlY coating in various H2–H2O atmospheres, Surf Coat Technol, 82, 133, 10.1016/0257-8972(95)02665-7 · DOI
  15. Liu, 2004, Oxidation behavior of TiAl(Cr,Ag) at 900°C in water vapor, Intermetallics, 12, 459, 10.1016/j.intermet.2003.10.008 · DOI
  16. Å´kermark, 1997, Oxygen exchange in oxidation of an Fe–20Cr–10Al alloy in mbar O2/H2O–gas mixtures at 920°C, Oxid Met, 47, 117, 10.1007/BF01682374 · DOI
  17. Jacob, 2002, The effect of gas composition on the isothermal oxidation behaviour of PM chromium, Corros Sci, 44, 2027, 10.1016/S0010-938X(02)00022-7 · DOI
  18. Hultquist, 2000, Hydrogen in chromium: influence on the high-temperature oxidation kinetics in H2O, oxide-growth mechanisms, and scale adherence, Oxid Met, 54, 1, 10.1023/A:1004610626903 · DOI
  19. Henry, 2000, Characterization of chromia scales grown on pure chromium in different oxidizing atmospheres, Mater High Temp, 17, 231, 10.3184/096034000783640866 · DOI
  20. Hänsel, 2003, Role of water vapor in chromia-scale growth at low oxygen partial pressure, Oxid Met, 59, 285, 10.1023/A:1023040010859 · DOI
  21. Schütze, 2005, Chemical–mechanical failure of oxide scales on 9% Cr steels in air with H2O, Mater High Temp, 22, 113, 10.3184/096034005782750536 · DOI
  22. Galerie, 2005, Mechanisms of chromia scale failure during the course of 15–18Cr ferritic stainless steel oxidation in water vapour, Mater High Temp, 22, 105, 10.3184/096034005782750527 · DOI
  23. Fujii, 1964, The mechanism of the high temperature oxidation of iron–chromium alloys in water vapour, JECS, 111, 1215
  24. Źurek, 2005, The effect of water-vapor content and gas flow rate on the oxidation mechanism of a 10%Cr–ferritic steel in Ar–H2O mixtures, Oxid Met, 63, 401, 10.1007/s11085-005-4394-1 · DOI
  25. Mikkelsen, 2003, High temperature oxidation of Fe–Cr Alloy in O2–H2–H2O atmosphere, microstructure and kinetics, Mater Sci Eng, A361, 198, 10.1016/S0921-5093(03)00527-6 · DOI
  26. Cheng, 2006, Effect of water vapor on annealing scale formation on 316 SS, Corros Sci, 48, 634, 10.1016/j.corsci.2005.02.014 · DOI
  27. Yang, 2005, Effects of water vapor on oxidation behavior of ferritic stainless steels under solid oxide fuel cell interconnect exposure conditions, Solid State Ionics, 176, 1495, 10.1016/j.ssi.2005.03.019 · DOI
  28. Nakagawa, 2003, Corrosion behavior of ferritic steels on the air sides of boiler tubes in a steam/air dual environment. Proceedings of the conference “life cycle issues in advanced energy systems”, Sci Rev, 67
  29. Peng, 2005, Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air, Acta Mater, 53, 5079, 10.1016/j.actamat.2005.07.019 · DOI
  30. Jianian, 1997, High-temperature oxidation of Fe–Cr alloys in wet oxygen, Oxid Met, 48, 347, 10.1007/BF01670507 · DOI
  31. Pieraggi, 2005, Morphological characteristics of oxide scales grown on H11 steel oxidised in dry or wet air, Mater High Temp, 22, 61, 10.3184/096034005782750617 · DOI
  32. Monteiro Maurı´cio de Jesus, Saunders Stuart, Assunção Fernando Cosme Rizzo. The effect of water vapour on the high-temperature oxidation of a high speed steel. In: Proceedings of ABM 2006; 2006. p. 128–37.
  33. Zeng, 1994, High-temperature corrosion of Cr2O3-forming alloys in CO–CO2–N2 atmospheres, Oxid Met, 42, 163, 10.1007/BF01052021 · DOI
  34. Yang, 2004, Oxidation behaviour of ferritic stainless steels under SOFC interconnect exposure conditions, J Electrochem Soc, 151, B669, 10.1149/1.1810393 · DOI
  35. Ehlers, 2006, Enhanced oxidation of the 9%Cr steel P91 in water vapour containing environments, Corrosion Sci, 48, 3428, 10.1016/j.corsci.2006.02.002 · DOI
  36. Asteman, 2002, Evidence for chromium evaporation influencing the oxidation of 304L: the effect of temperature and flow rate, Oxid Met, 57, 193, 10.1023/A:1014877600235 · DOI
  37. Halvarsson, 2006, Microstructural investigation of the breakdown of the protective oxide scale on a 304 steel in the presence of oxygen and water vapour at 600°C, Corrosion Sci, 48, 2014, 10.1016/j.corsci.2005.08.012 · DOI · Paper page
  38. Asteman, 2002, Oxidation of 310 steel in H2O/O2 mixtures at 600°C: the effect of water-vapour-enhanced chromium evaporation, Corrosion Sci, 44, 2635, 10.1016/S0010-938X(02)00056-2 · DOI · Paper page
  39. Segerdahl, 2005, Breakdown of the protective oxide on 11% Cr steel at high temperature in the presence of water vapor and oxygen, the influence of chromium vaporization, Mater High Temp, 22, 69, 10.3184/096034005782750572 · DOI
  40. Yamauchi, 2003, Evaporation of Cr2O3 in atmospheres containing H2O, Oxid Met, 59, 517, 10.1023/A:1023671206976 · DOI
  41. Opila, 2004, Volatility of common protective oxides in high-temperature water vapor: current understanding and unanswered questions, Mater Sci Forum, 461–464, 765, 10.4028/www.scientific.net/MSF.461-464.765 · DOI
  42. Holcomb, 2006, The effect of manganese additions on the reactive evaporation of chromium in Ni–Cr alloys, Scripta Mater, 54, 1821, 10.1016/j.scriptamat.2006.01.026 · DOI
  43. Rahmel, 1965, Einfluss von Wasserdampf und Kohlendioxyd auf die Oxydation von Nickel in Sauerstoff bei Hohen Temperaturen, Corrosion Sci, 5, 815, 10.1016/S0010-938X(65)80011-7 · DOI
  44. Wood, 1970, A comparison of the oxidation of Fe–Cr, Ni–Cr and Co–Cr alloys in oxygen and water vapour, Werkstoffe und Korrosion, 21, 900, 10.1002/maco.19700211105 · DOI
  45. England, 2001, Oxidation kinetics of some nickel-based superalloy foils in humidified hydrogen and electronic resistance of the oxide scale formed, Part II, J Electrochem Soc, 148, A330, 10.1149/1.1354611 · DOI
  46. England, 1999, Oxidation kinetics of some nickel-based superalloy foils and electronic resistance of the oxide scale formed in air, Part I, J Electrochem Soc, 146, 3196, 10.1149/1.1392454 · DOI
  47. Hussain, 2004, High-temperature oxidation behavior of HASTELLOY C-4 in steam, Oxid Met, 61, 355, 10.1023/B:OXID.0000032328.23022.31 · DOI
  48. Hussain, 1994, Oxidation of high temperature alloys (superalloys) at elevated temperatures in air: 1, Oxid Met, 41, 251, 10.1007/BF01080783 · DOI
  49. Deal, 1965, General relationship for the thermal oxidation of silicon, J Phys, 36, 3770
  50. Irene, 1983, Silicon oxidation studies: a revised model for thermal oxidation, J Appl Phys, 54, 5416, 10.1063/1.332722 · DOI
  51. Bhat, 2001, Characterization of ultrathin oxides of silicon grown by wet oxidation at 800°C, Solid State Electron, 45, 1127, 10.1016/S0038-1101(01)00136-8 · DOI
  52. Sofield, 1995, Oxidation of silicon: the VLSI gate dielectric, Semicond Sci Technol, 10, 215, 10.1088/0268-1242/10/3/001 · DOI
  53. Kovalgin, 2005, Hof A, Schmitz J. An approach to modeling of silicon oxidation in a wet ultra-diluted ambient, Microelectron Eng, 80, 432, 10.1016/j.mee.2005.04.101 · DOI
  54. Hu, 1983, New oxide growth law and the thermal oxidation of silicon, Appl Phys Lett, 42, 874, 10.1063/1.93797 · DOI
  55. Opila, 1999, Variation of the oxidation rate of silicon carbide with water vapour pressure, J Am Ceram Soc, 82, 625, 10.1111/j.1151-2916.1999.tb01810.x · DOI
  56. Opila, 2004, Volatility of common protective oxides in high-temperature water vapor: current understanding and unanswered questions, Mater Sci Forum, 461–464, 65
  57. Robinson, 1999, SiC recession caused by SiO2 scale volatility under combustion conditions 1: experimental results and empirical model, J Am Ceram Soc, 82, 1817, 10.1111/j.1151-2916.1999.tb02004.x · DOI
  58. Hansson, 2005, The beneficial effect of water vapour on the oxidation at 600 and 700°C of a MoSi2-based composite, J Eur Ceram Soc, 25, 1, 10.1016/j.jeurceramsoc.2004.01.005 · DOI
  59. Ishitsuka, 2004, Effect of silicon on the steam oxidation resistance of a 9%Cr heat resistant steel, Oxid Met, 61, 125, 10.1023/B:OXID.0000016280.81734.3f · DOI
  60. Wouters, 2004, Oxygen and water vapour oxidation of 15Cr ferritic oxygen and water vapour oxidation of 15Cr ferritic stainless steels with different silicon contents, Mater Sci Forum, 461–464, 839, 10.4028/www.scientific.net/MSF.461-464.839 · DOI
  61. Ueda, 2005, Oxygen potential distribution during disappearance of the internal oxidation zone formed in the steam oxidation of Fe–9Cr–0.26Si ferritic steel at 973K, Mater High Temp, 22, 79, 10.3184/096034005782750545 · DOI
  62. Ueda, 2003, Formation and disappearance of an internal oxidation zone in the initial stage of the steam oxidation of Fe–9Cr–0.26Si ferritic steel, Mater High Temp, 20, 109, 10.3184/096034003782748964 · DOI
  63. Wouters, 1997, Thermal oxidation of titanium by water vapour, Solid State Ionics, 104, 89, 10.1016/S0167-2738(97)00400-1 · DOI
  64. Zeller, 2002, Influence of water vapour on the oxidation behaviour of titanium aluminides, Intermetallics, 10, 59, 10.1016/S0966-9795(01)00104-2 · DOI
  65. Taniguchi, 2001, Influence of water vapour on the isothermal oxidation behaviour of TiAl at high temperatures, Mater Sci Eng, A307, 107, 10.1016/S0921-5093(00)01967-5 · DOI
  66. Brady, 1997, The role of Cr in promoting protective alumina scale formation by γ-based Ti–Al–Cr Alloys – II. Oxidation behavior in air, Acta Mater, 45, 2371, 10.1016/S1359-6454(96)00361-8 · DOI
  67. Rahmel, 1965, Einfluss von Wasserdampf und Kohlendioxyd auf die Oxydation von Eisen in Sauerstoff bei Hohen Temperaturen, Corrosion Sci, 5, 333, 10.1016/S0010-938X(65)90500-7 · DOI
  68. Mrowec, 1967, On the mechanism of high temperature oxidation of metals and alloys, Corrosion Sci, 7, 563, 10.1016/0010-938X(67)80033-7 · DOI
  69. Tuck, 1969, The oxidation of iron at 950°C in oxygen/water vapour mixtures, Corrosion Sci, 9, 271, 10.1016/S0010-938X(69)80056-9 · DOI
  70. Hayashi, 2001, Competitive effect of water vapor and oxygen on the oxidation of Fe–5wt.% Al alloy at 1073K, Oxid Met, 56, 251, 10.1023/A:1010372711563 · DOI
  71. Fukumoto, 2001, Effect of water vapor on the oxidation behavior of Fe–1.5Si in air at 1073 and 1273K, Oxid Met, 55, 401, 10.1023/A:1010353729663 · DOI
  72. Hayashi, 2002, Transient oxidation behavior of Fe–5wt.%Al alloy at 1073K in atmospheres containing both oxygen and water vapor, Oxid Met, 58, 319, 10.1023/A:1020106804999 · DOI
  73. Raynaud, 1984, In situ observation of whiskers, pyramids and pits during high temperature oxidation of metals, Oxid Met, 21, 89, 10.1007/BF00659470 · DOI
  74. Tallman, 1967, J Electrochem Soc, 114, 1227, 10.1149/1.2426455 · DOI
  75. Quadakkers, 2005, Steam oxidation of ferritic steels – laboratory test kinetic data, Mater High Temp, 22, 47, 10.3184/096034005782750590 · DOI
  76. Ikeda, 1984, Mechanism of accelerated oxidation of Fe–Cr alloys in water vapour containing atmosphere, Trans Jpn Inst Met, 26, 52
  77. Anghel, 2006, Gas-tight oxides – reality or just a hope, Mater Sci Forum, 522–523, 93, 10.4028/www.scientific.net/MSF.522-523.93 · DOI
  78. Davies, 2005, Theoretical study of steam grown oxides as a function of temperature, pressure and p(O2), Mater High Temp, 22, 15, 10.3184/096034005782750455 · DOI
  79. Davies, 2002, MTDATA – thermodynamic and phase equilibrium software from the national physical laboratory, CALPHAD, 26, 229, 10.1016/S0364-5916(02)00036-6 · DOI
  80. Armitt J, Holmes DR, Manning MI, Meadowcroft DB, Metcalfe E. The spalling of steam-grown oxide from superheater and reheater tube steels. EPRI Report FP-686, February 1978. · DOI
  81. Tedmon, 1966, J Electrochem Soc, 113, 766, 10.1149/1.2424115 · DOI
  82. Tobias Johnson, 2000, Hydrolysis on transition metal oxide clusters and the stabilities of M–O–M bridges, Inorg Chem, 39, 3192, 10.1021/ic991144l · DOI
  83. Tobias Johnson, 2000, Water adsorption and hydrolysis on molecular transition metal oxides and oxyhydroxides, Inorg Chem, 39, 3181, 10.1021/ic991150h · DOI
  84. Milewska, 2004, Coating design using computational codes for steam oxidation conditions, Mater Sci Forum, 461–464, 321, 10.4028/www.scientific.net/MSF.461-464.321 · DOI
  85. Saunders, 2006, Current understanding of steam oxidation – power plant and laboratory experience, Mater Sci Forum, 522–523, 119, 10.4028/www.scientific.net/MSF.522-523.119 · DOI
  86. Pinzari, 2000, On the surface acid–base properties of titanium sheets, Appl Surf Sci, 156, 1, 10.1016/S0169-4332(99)00510-3 · DOI
  87. Sun, 2003, A review of the different techniques for solid surface acid–base characterization, Adv Colloid Interface Sci, 105, 151, 10.1016/S0001-8686(03)00066-6 · DOI
  88. Kosmulski, 2002, The pH-dependent surface charging and the points of zero charge, J Colloid Interface Sci, 253, 77, 10.1006/jcis.2002.8490 · DOI
  89. Kosmulski, 2004, pH-dependent surface charging and points of zero charge, II. Update, J Colloid Interface Sci, 275, 214, 10.1016/j.jcis.2004.02.029 · DOI
  90. Harju, 2004, Surface characterization of plasma sprayed oxide materials: estimation of surface acidity using mass titration, J Colloid Interface Sci, 276, 346, 10.1016/j.jcis.2004.03.058 · DOI
  91. Anghel, 2004, Gas phase analysis of CO interactions with solid surfaces at high temperatures, Appl Surf Sci, 233, 392, 10.1016/j.apsusc.2004.04.001 · DOI
  92. Tveten, 2001, Hydrogen and yttria in chromium: influence on the high-temperature oxidation kinetics in O2, oxide-growth mechanisms and scale adherence, Oxid Met, 55, 279, 10.1023/A:1010360111005 · DOI
  93. Hultquist, 2006, Catalysed self-cleaning of air on the earth’s surface, J Atmosph Chem, 55, 131, 10.1007/s10874-006-9031-0 · DOI
  94. Å´kermark, 1998, The use of oxygen isotopic labeling to understand oxidation mechanisms, Oxid Met, 50, 167, 10.1023/A:1018832103466 · DOI
  95. Larsson, 2001, Role of water and oxygen in wet and dry oxidation of diamond, J Appl Phys, 90, 026, 10.1063/1.1376671 · DOI
  96. Tallman, 1967, Crystal morphology and mechansims of growth of alpha-Fe2O3 whiskers on iron, J Electrochem Soc, 114, 1228
  97. Kofstad, 1995, Defect and transport properties in metal oxides, Oxid Met, 44, 3, 10.1007/BF01046721 · DOI
  98. Holt, 1999, Electrical conductivity of Cr2O3 doped with TiO2, Solid State Ionics, 117, 21, 10.1016/S0167-2738(98)00244-6 · DOI
  99. Holt, 1997, Electrical conductivity and defect structure of Mg-doped Cr2O3, Solid State Ionics, 100, 201, 10.1016/S0167-2738(97)00352-4 · DOI
  100. Norby, 1993, Protonic defects in oxides and their possible role in high temperature oxidation, J Phys IV C9, 3, 99
  101. Atkinson, 2003, Accommodation of impurities in α-Al2O3, α-Cr2O3 and α-Fe2O3, J Eur Ceram Soc, 23, 3059, 10.1016/S0955-2219(03)00101-8 · DOI
  102. Dieckmann, 2005, Solution and transport of water in oxides, Mater High Temp, 22, 93, 10.3184/096034005782750509 · DOI
  103. Kröger, 1956, Relations between the concentrations of imperfections in crystalline solids, Solid State Phys – Adv Res Appl, 3, 307
  104. El-Aiat, 1982, Determination of the parameters of native disorder in α-Al2O3, J Am Ceram Soc, 65, 162, 10.1111/j.1151-2916.1982.tb10387.x · DOI
  105. Pint, 2003, The use of two reactive elements to optimize oxidation performance of alumina-forming alloys, Mater High Temp, 20, 129, 10.1179/mht.2003.044 · DOI
  106. Kurita, 2003, Hydrogen concentration cell using α-Al2O3 as a solid electrolyte, Solid State Ionics, 162–163, 135, 10.1016/S0167-2738(03)00254-6 · DOI
  107. Fukatsu, 2003, Incorporation of hydrogen into magnesium-doped α-alumina, Solid State Ionics, 162–163, 147, 10.1016/S0167-2738(03)00218-2 · DOI
  108. Norby, 1984, High Temp High Pressures, 12, 189
  109. Caldararu, 2001, Electrical conductivity of γ-Al2O3 at atmospheric pressure under dehydrating/ hydrating conditions, Appl Surf Sci, 181, 255, 10.1016/S0169-4332(01)00393-2 · DOI
  110. Holt, 1994, Electrical conductivity and defect structure of Cr2O3. I. High temperatures (>1000°C), Solid State Ionics, 69, 127, 10.1016/0167-2738(94)90401-4 · DOI
  111. Holt, 1994, Electrical conductivity and defect structure of Cr2O3. II. Reduced temperatures (<1000°C), Solid State Ionics, 69, 137, 10.1016/0167-2738(94)90402-2 · DOI
  112. Atkinson, 2006, Defect properties of Ti-doped Cr2O3, Solid State Ionics, 177, 1767, 10.1016/j.ssi.2005.11.015 · DOI
  113. Haaß, 2001, High-temperature in situ X-ray absorption studies on the iron valence in iron-doped nickel oxide (Ni1−xFex)1−δO, Solid State Ionics, 141–142, 289, 10.1016/S0167-2738(01)00763-9 · DOI
  114. Minervini, 1999, Defect clustering in wüstite, J Phys Chem Solids, 60, 235, 10.1016/S0022-3697(98)00273-X · DOI
  115. Dieckmann, 1998, Point defects and transport in non-stoichiometric oxides: solved and unsolved problems, J Phys Chem Solids, 59, 507, 10.1016/S0022-3697(97)00205-9 · DOI
  116. Gómes-Garcı´a, 2002, The influence of oxygen partial pressure on creep recovery in magnetite single crystals, J Phys Chem Solids, 63, 185, 10.1016/S0022-3697(01)00083-X · DOI
  117. Dieckmann, 1993, Point defects and transport in haematite (Fe2O3−ε), Philos Mag A, 68, 725, 10.1080/01418619308213994 · DOI
  118. Haugsrud, 2003, On the high temperature oxidation of nickel, Corrosion Sci, 45, 211, 10.1016/S0010-938X(02)00085-9 · DOI
  119. Renusch, 2005, Experience with the use of the acoustic emission techniques for monitoring scale failure in wet and dry environments, Mater High Temp, 22, 34, 10.1179/mht.2005.005 · DOI
  120. Hughes A, Dooley RB, Paterson S. Oxide exfoliation of 347HFG in high-temperature boilers. In: Paper presented at the 7th international conference and exhibition on operating pressure equipment; 2003.
  121. Dooley RB. Opening remarks at the EPRI-NPL workshop on scale growth and exfoliation in steam plant. National Physical Laboratory; 2003.
  122. Evans, 1995, Stress effects in high temperature corrosion, Int Mater Rev, 40, 1, 10.1179/imr.1995.40.1.1 · DOI
  123. Lipkin, 1997, Stress development in alumina scales formed upon oxidation of (111) NiAl single crystals, Corrosion Sci, 39, 231, 10.1016/S0010-938X(97)83344-6 · DOI
  124. Tolpygo, 2000, Microstructural study of the theta–alpha transformation in alumina scales, Mater High Temp, 17, 59, 10.1179/mht.2000.011 · DOI
  125. Nishimura, 2005, Japanese experience with steam oxidation of advanced heat-resistant steel tubes in power boilers, Mater High Temp, 22, 3, 10.3184/096034005782750554 · DOI
  126. Schütze, 2004, Parameters determining the breakaway oxidation behaviour of ferritic martensitic 9%Cr steels in environments containing H2O, Corrosion Eng, Sci Technol, 39, 157, 10.1179/147842204225016921 · DOI
  127. Donchev, 2005, The effect of water vapor in increasing growth stresses in the oxide scale on martensitic steam plant alloys, Mater High Temp, 22, 139, 10.3184/096034005782750446 · DOI
  128. Garcia Vargas, 2004, The effect of water vapour on the oxidation of stainless steels studied in situ by X-ray diffraction, Mater Sci Forum, 461–464, 823, 10.4028/www.scientific.net/MSF.461-464.823 · DOI
  129. Evans, 2005, Spallation models and their relevance to steam-grown oxides, Mater High Temp, 22, 155, 10.3184/096034005782750608 · DOI
  130. Osgerby, 2005, Tensile cracking of a chromia layer on a stainless steel during thermal cycling with hold periods, Mater Sci Eng A, 412, 182, 10.1016/j.msea.2005.08.193 · DOI
  131. Tolpygo, 1999, Tensile cracking during thermal cycling of alumina films formed by high-temperature oxidation, Acta Mater, 47, 3589, 10.1016/S1359-6454(99)00216-5 · DOI
  132. Freiman, 1976, Effect of environment on fracture of ceramics, Ceramurgia Int, 2, 111, 10.1016/0390-5519(76)90020-X · DOI
  133. Grosskreutz, 1967, The effect of oxide films on dislocation–surface interactions in aluminium, Surface Sci, 8, 173, 10.1016/0039-6028(67)90080-5 · DOI
  134. McElhaney, 2004, Investigation of moisture-assisted fracture in SiO2 films using a channel cracking technique, Acta Mater, 52, 3621, 10.1016/j.actamat.2004.04.014 · DOI
  135. Otsuka, 2005, fracture behavior of steam-grown oxide scales formed on 2–12%Cr steels, Mater High Temp, 22, 131, 10.3184/096034005782750563 · DOI
  136. Nagl, 1993, The failure of iron oxide scales at growth temperature under tensile stress, J Phys IV, Colloque C9, Supp J Phys III, 3, 933
  137. Kirchheim, 2003, Metal/oxide interfaces and their reaction with hydrogen, Z Metallkd, 94, 266, 10.3139/146.030266 · DOI
  138. Huang, 1991, Hydrogen and oxygen at metal/oxide interfaces, Acta Metall Mater, 39, 893, 10.1016/0956-7151(91)90289-D · DOI
  139. Nagao, 2003, First-principles study of adhesion at Cu/SiO2 interfaces, Phys Rev B, 68, 125403-1, 10.1103/PhysRevB.68.125403 · DOI
  140. Backhaus-Ricoult, 2002, Changes in Cu–silica interfacial chemistry with oxygen chemical potential, Acta Mater, 50, 4191, 10.1016/S1359-6454(02)00267-7 · DOI
  141. Hou, 2005, A survey of test methods for scale adhesion measurement, Mater High Temp, 22, 121, 10.3184/096034005782750482 · DOI
  142. McCartney, 2005, Modelling scale failure in tension (fracture and spallation), Mater High Temp, 22, 167, 10.3184/096034005782750581 · DOI
  143. Schütze, 2005, Modelling oxide scale fracture, Mater High Temp, 22, 147, 10.3184/096034005782750437 · DOI
  144. Schütze, 1994, An approach to a global model of the mechanical behaviour of oxide scales, Mater High Temp, 12, 237, 10.1080/09603409.1994.11689491 · DOI
  145. Wright IG, Schütze M, Paterson SR, Tortorelli PF, Dooley RB. Progress in prediction and control of scale exfoliation on superheater and reheater alloys. In: Proceedings of EPRI international conference on boiler tube and HRSG tube failures and inspections; 2004.

Cited by

Sorted by citations

Metadata

Authors
Saunders, S. R. J., Monteiro, M., & Rizzo, F.
Affiliations
Pontifícia Universidade Católica do Rio de Janeiro (BR)
Corresponding author
Rizzo, F.
ORCID
Monteiro, M.
Venue
Progress in Materials Science
Publisher
Elsevier BV
Published
2008-07
Volume
53
Issue
5
Pages
775-837
ISSN
0079-6425 (ISSN-L)
DOI
10.1016/j.pmatsci.2007.11.001
OpenAlex
W2082474544
Cited by
675
References
1
Citations by year
2026: 35 · 2025: 55 · 2024: 55 · 2023: 53 · 2022: 41 · 2021: 46 · 2020: 48 · 2019: 41 · 2018: 41 · 2017: 51 · 2016: 23 · 2015: 38 · 2014: 26 · 2013: 33 · 2012: 24
FWCI
24.21
Type
journal article
Language
en
Open access
closed
Licence
www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations
Progress in Materials Science (publishedVersion)
Topics
  • Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
  • Physical Sciences › Energy › Fuel Technology › Chemical Looping and Thermochemical Processes
  • Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
Keywords
high-temperature oxidation, water vapor, oxide scale formation, alumina, chromia, silica, titanium dioxide, iron oxide, nickel oxide, scale morphology, whisker formation, scale porosity, cation diffusion, vacancy condensation, hydroxide formation, oxide stability, water dissociation, proton hopping, oxygen diffusion, inward diffusion

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review