The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.
A review of numerical analysis of friction stir welding
Open accessAbstract
Friction stir welding is a relatively new solid-state joining technique which is widely adopted in different industry fields to join different metallic alloys that are hard to weld by conventional fusion welding. Friction stir welding is a highly complex process comprising several highly coupled physical phenomena. The complex geometry of some kinds of joints and their three dimensional nature make it difficult to develop an overall system of governing equations for theoretical analyzing the behavior of the friction stir welded joints. The experiments are often time consuming and costly. To overcome these problems, numerical analysis has frequently been used since the 2000s. This paper reviews the latest developments in the numerical analysis of friction stir welding processes, microstructures of friction stir welded joints and the properties of friction stir welded structures. Some important numerical issues such as materials flow modeling, meshing procedure and failure criteria are discussed. Numerical analysis of friction stir welding will allow many different welding processes to be simulated in order to understand the effects of changes in different system parameters before physical testing, which would be time-consuming or prohibitively expensive in practice. The main methods used in numerical analysis of friction stir welding are discussed and illustrated with brief case studies. In addition, several important key problems and issues remain to be addressed about the numerical analysis of friction stir welding and opportunities for further research are identified.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Friction stir welding and processing
Mishra, R. S., & Ma, Z. Y. (2005) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2005.07.001 · Cited by 6,753
Friction stir welding and processing
(2008) · Choice Reviews Online · doi:10.5860/choice.46-0901 · Cited by 3,862
Recent advances in friction-stir welding – Process, weldment structure and properties
NANDAN, R., DEBROY, T., & BHADESHIA, H. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.05.001 · Cited by 2,098
Friction stir welding of aluminium alloys
Threadgill, P. L., Leonard, A. J., Shercliff, H., & Withers, P. J. (2009) · International Materials Reviews · doi:10.1179/174328009x411136 · Cited by 1,344
Thomas, W. M. (1991) · Medical Entomology and Zoology · Cited by 972
An analytical model for the heat generation in friction stir welding
Schmidt, H., Hattel, J., & Wert, J. (2004) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/12/1/013 · Cited by 809
Review: Friction stir welding tools
Rai, R., De, A., Bhadeshia, H. K. D. H., & DebRoy, T. (2011) · Science and Technology of Welding and Joining · doi:10.1179/1362171811y.0000000023 · Cited by 808
A process model for friction stir welding of age hardening aluminum alloys
Frigaard, Ø., Grong, Ø., & Midling, O. T. (2001) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-001-0128-4 · Cited by 688
Recrystallization mechanisms during friction stir welding/processing of aluminum alloys
McNelley, T. R., Swaminathan, S., & Su, J. Q. (2008) · Scripta Materialia · doi:10.1016/j.scriptamat.2007.09.064 · Cited by 621
Friction stir welded structural materials: beyond Al-alloys
Çam, G. (2011) · International Materials Reviews · doi:10.1179/095066010x12777205875750 · Cited by 548
Thermal modeling of friction stir welding in a moving coordinate system and its validation
Song, M., & Kovacevic, R. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(03)00022-1 · Cited by 485
Three-dimensional modeling of the friction stir-welding process
Ulysse, P. (2002) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(02)00114-1 · Cited by 477
Material flow behavior during friction stir welding of aluminum
Colligan, K. J. (1999) · Welding Journal · Cited by 446
Heat Transfer in Friction Stir Welding—Experimental and Numerical Studies
Chao, Y. J., Qi, X., & Tang, W. X. (2003) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.1537741 · Cited by 443
3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile
Colegrove, P. A., & Shercliff, H. R. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.03.015 · Cited by 427
A local model for the thermomechanical conditions in friction stir welding
Schmidt, H., & Hattel, J. (2005) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/13/1/006 · Cited by 426
Zhu, X., & Chao, Y. J. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.10.025 · Cited by 421
Visualization of the material flow in AA2195 friction-stir welds using a marker insert technique
Seidel, T. U., & Reynolds, A. P. (2001) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-001-1038-1 · Cited by 390
Nandan, R., Roy, G. G., & Debroy, T. (2006) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-1076-9 · Cited by 390
Khandkar, M. Z. H., Khan, J. A., & Reynolds, A. P. (2003) · Science and Technology of Welding and Joining · doi:10.1179/136217103225010943 · Cited by 354
Material flow in butt friction stir welds in AA2024-T3
Schmidt, H. N. B., Dickerson, T., & Hattel, J. H. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.10.052 · Cited by 352
Nandan, R., Roy, G. G., Lienert, T. J., & DebRoy, T. (2006) · Science and Technology of Welding & Joining · doi:10.1179/174329306x107692 · Cited by 321
Design of the friction stir welding tool using the continuum based FEM model
Buffa, G., Hua, J., Shivpuri, R., & Fratini, L. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2005.09.041 · Cited by 301
Coupled Eulerian Lagrangian finite element modeling of friction stir welding processes
Al-Badour, F., Merah, N., Shuaib, A., & Bazoune, A. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.02.014 · Cited by 237
Elangovan, K., Balasubramanian, V. R., & Babu, S. (2008) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2008.04.037 · Cited by 231
Thermo-mechanical model with adaptive boundary conditions for friction stir welding of Al 6061
Soundararajan, V., Zekovic, S., & Kovacevic, R. (2005) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.02.008 · Cited by 214
Modeling strain hardening and texture evolution in friction stir welding of stainless steel
Cho, J.-H., Boyce, D. E., & Dawson, P. R. (2005) · Materials Science and Engineering: A · doi:10.1016/j.msea.2005.03.002 · Cited by 211
Shojaeefard, . H., Behnagh, R. A., Akbari, M., Givi, M. K. B., & Farhani, F. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.07.025 · Cited by 204
Mechanical response of friction stir welded AA2024: experiment and modeling
Lockwood, W. D., Tomaz, B., & Reynolds, A. P. (2002) · Materials Science and Engineering A · doi:10.1016/s0921-5093(01)01385-5 · Cited by 198
Numerical modeling of friction stir welding process: a literature review
Neto, D. M., & Neto, P. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4154-8 · Cited by 195
Chowdhury, S. M., Chen, D. L., Bhole, S. D., & Cao, X. J. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.06.012 · Cited by 187
3D modeling of material flow in friction stir welding under different process parameters
Zhang, H. W., Zhang, Z., & Chen, J. T. (2006) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.09.027 · Cited by 186
Finite element simulation of material flow in friction stir welding
Xu, S., Deng, X., Reynolds, A. P., & Seidel, T. U. (2001) · Science and Technology of Welding & Joining · doi:10.1179/136217101101538640 · Cited by 184
Buffa, G., Campanile, G., Fratini, L., & Prisco, A. (2009) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.04.046 · Cited by 183
Numerical studies on controlling of process parameters in friction stir welding
Zhang, Z., & Zhang, H. W. (2008) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2008.01.044 · Cited by 181
Two-dimensional friction stir welding process model based on fluid mechanics
Seidel, T. U., & Reynolds, A. P. (2003) · Science and Technology of Welding & Joining · doi:10.1179/136217103225010952 · Cited by 179
Banded microstructure in AA2024-T351 and AA2524-T351 aluminum friction stir welds
Yang, B., Yan, J., Sutton, M. A., & Reynolds, A. P. (2004) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00532-x · Cited by 175
Simulation of material flow in friction stir processing of a cast Al–Si alloy
Tutunchilar, S., Haghpanahi, M., Givi, M. K. B., Asadi, P., & Bahemmat, P. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.04.001 · Cited by 162
Predicting residual thermal stresses in friction stir welded metals
Khandkar, M. Z. H., Khan, J. A., Reynolds, A. P., & Sutton, M. A. (2006) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.12.013 · Cited by 154
A study of texture patterns in friction stir welds
XU, S. (2008) · Acta Materialia · doi:10.1016/j.actamat.2007.11.016 · Cited by 151
Numerical and experimental study of the heat transfer process in friction stir welding
Song, M., & Kovacevic, R. (2003) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/095440503762502297 · Cited by 150
Experimental and numerical investigation of the plunge stage in friction stir welding
Mandal, S., Rice, J., & Elmustafa, A. A. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.10.067 · Cited by 149
Reynolds, A. P., Tang, W. X., Khandkar, Z., Khan, J. A., & Lindner, K. (2005) · Science and Technology of Welding & Joining · doi:10.1179/174329305x37024 · Cited by 139
Heat Flow Model for Friction Stir Welding of Aluminum Alloys
Gould, J. E., & Feng, Z. (1998) · Journal of Materials Processing & Manufacturing Science · doi:10.1106/648r-2cne-2pd0-45l6 · Cited by 135
Pan, W., Li, D., Tartakovsky, A. M., Ahzi, S., Khraisheh, M. K., & Khaleel, M. (2013) · International Journal of Plasticity · doi:10.1016/j.ijplas.2013.02.013 · Cited by 127
A fully coupled thermo-mechanical model of friction stir welding
Zhang, Z., & Zhang, H. W. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-007-0971-6 · Cited by 125
Interfacial sticking and slipping in the friction stir welding process
Schneider, J. A., Beshears, R. D., & Nunes, A. C. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.07.082 · Cited by 123
Aval, H. J., serajzadeh, S., & Kokabi, A. H. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.07.056 · Cited by 118
Development of Trivex friction stir welding tool Part 2 – three-dimensional flow modelling
Colegrove, P. A., & Shercliff, H. R. (2004) · Science and Technology of Welding & Joining · doi:10.1179/136217104225021661 · Cited by 112
Colegrove, P. A., & Shercliff, H. R. (2004) · Science and Technology of Welding & Joining · doi:10.1179/136217104225021670 · Cited by 110
Modeling of AA5083 Material-Microstructure Evolution During Butt Friction-Stir Welding
Grujicic, M., Arakere, G., Yalavarthy, H. V., He, T., YEN, C. F., & Cheeseman, B. A. (2009) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-009-9536-1 · Cited by 109
Ji, S., Shi, Q., Zhang, L., Zou, A. L., Gao, S., & Zan, L. V. (2012) · Computational Materials Science · doi:10.1016/j.commatsci.2012.06.001 · Cited by 107
Two-dimensional CFD modelling of flow round profiled FSW tooling
Colegrove, P. A., & Shercliff, H. R. (2004) · Science and Technology of Welding & Joining · doi:10.1179/136217104225021832 · Cited by 105
Numerical simulation of friction stir butt welding process for AA5083-H18 sheets
Kim, D., Badarinarayan, H., Kim, J. H., Kim, C., Okamoto, K., WAGONER, R. H., & Chung, K. (2009) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2009.10.006 · Cited by 101
Kitamura, K., Fujii, H., Iwata, Y., Sun, Y., & Morisada, Y. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.10.051 · Cited by 100
Arora, A., DebRoy, T., & Bhadeshia, H. K. D. H. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.12.001 · Cited by 95
CDRX modelling in friction stir welding of AA7075-T6 aluminum alloy: Analytical approaches
Buffa, G., Fratini, L., & Shivpuri, R. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.03.033 · Cited by 74
Multi‐physics simulation of friction stir welding process
Hamilton, R., Mackenzie, D., & Li, H. (2010) · Engineering Computations · doi:10.1108/02644401011082980 · Cited by 68
Song, M., & Kovacevic, R. (2004) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/095440504772830174 · Cited by 65
Biro, A. L., Chenelle, B. F., & Lados, D. A. (2012) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-012-9716-5 · Cited by 62
Manvatkar, V., Arora, A., De, A., & DebRoy, T. (2012) · Science and Technology of Welding & Joining · doi:10.1179/1362171812y.0000000035 · Cited by 60
Interface behaviours and mechanical properties of filling friction stir weld joining AA 2219
Huang, Y., Han, B. Q., Lv, S., Feng, J. C., Liu, H. J., Leng, J., & Li, Y. (2012) · Science and Technology of Welding & Joining · doi:10.1179/1362171811y.0000000100 · Cited by 56
Imam, M., Biswas, K., & Racherla, V. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.07.046 · Cited by 48
Investigation on texture evolution during friction stir welding of stainless steel
Cho, J., & Dawson, P. R. (2006) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-1093-8 · Cited by 44
Zhang, Z., & Chen, J. T. (2007) · Journal of Materials Science · doi:10.1007/s10853-007-2129-1 · Cited by 43
Numerical optimisation of friction stir welding: Review of future challenges
Tutum, C. C., & Hattel, J. H. (2011) · Science and Technology of Welding & Joining · doi:10.1179/1362171811y.0000000011 · Cited by 39
Sharifitabar, M., & Nami, H. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.05.025 · Cited by 37
Aval, H. J., Serajzadeh, S., & Kokabi, A. H. (2011) · Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · doi:10.1243/09544062jmes2267 · Cited by 36
Zhang, Z., & Chen, J. T. (2011) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3651-5 · Cited by 29
Friction Stir Welding of Magnesium Alloys under Different Process Parameters
Bruni, C., Buffa, G., Fratini, L., & Simoncini, M. (2010) · Materials science forum · doi:10.4028/www.scientific.net/msf.638-642.3954 · Cited by 24
Parametric finite-element studies on the effect of tool shape in friction stir welding
Li, H., Mackenzie, D., & Hamilton, R. (2010) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem1810 · Cited by 12
Structure and Mechanical Properties of Friction Stirred Beads of 6082-T6 Al Alloy and Pure Copper
Avettand-Fènoël, M.-N., Taillard, R., Herbelot, C., & Imad, A. (2010) · Materials science forum · doi:10.4028/www.scientific.net/msf.638-642.1209 · Cited by 11
Cited by
Heidarzadeh, A., Mironov, S., Kaibyshev, R., Çam, G., Simar, A., Gerlich, A., Khodabakhshi, F., Mostafaei, A., Field, D. P., Robson, J. D., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100752 · Cited by 1,048
Welding and Joining of NiTi Shape Memory Alloys: A Review
Oliveira, J. P., Miranda, R. M., & Braz Fernandes, F. M. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.008 · Cited by 379
Metadata
- Authors
- He, X., Gu, F., & Ball, A.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2014-08
- Volume
- 65
- Pages
- 1-66
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W1976335333
- Cited by
- 506
- References
- 72
- FWCI
- 51.03
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.