The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Corrosion in the molten fluoride and chloride salts and materials development for nuclear applications
Open accessAbstract
Abstract Next-generation nuclear reactor concepts and advanced techniques for reprocessing spent nuclear fuel (SNF) are drawing great attention in the nuclear field. Molten halide salts have been proposed as the fuel solvent and coolants for many molten salt reactor (MSR) concepts, and the electrolyte for the electrochemical separation of the SNF. The major concern of using molten salts is the corrosion of the structural materials imposed by these extreme environments. Materials corrosion is more challenging in the molten salt nuclear systems than in the traditional water reactors as the formation of the passivating oxide layer on the corrosion resistant alloys becomes thermodynamically unfavorable in molten salts and the use of many corrosion resistant alloys is restricted. This review takes a comprehensive approach covering all relevant work in the field: corrosion data accumulated since the 1950s to date, major corrosion problems and corresponding mechanisms, metallurgical factors, historical development of corrosion resistant alloys and recent attempts. The key environmental factors influencing corrosion in various nuclear systems, electrode kinetics, thermodynamic properties, and corrosion prevention techniques are also reviewed. Finally, current progress and challenges are summarized with an attempt at identifying knowledge gaps and future research directions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical Methods: Fundamentals and Applications
Bard, A. J., & Faulkner, L. R. (1980) · Cited by 22,435
Principles and prevention of corrosion
Jones, D. A. (1991) · Cited by 2,104
Materials corrosion in molten LiF–NaF–KF salt
Olson, L. C., Ambrosek, J. W., Sridharan, K., Anderson, M. H., & Allen, T. R. (2009) · Journal of Fluorine Chemistry · doi:10.1016/j.jfluchem.2008.05.008 · Cited by 479
Experience with the Molten-Salt Reactor Experiment
Haubenreich, P. N., & Engel, J. R. (1970) · Nuclear Applications · doi:10.13182/nt8-2-118 · Cited by 456
Janz, G. J., Gardner, G. L., Krebs, U., & Tomkins, R. P. T. (1974) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.3253134 · Cited by 325
The Molten Salt Reactor Adventure
MacPherson, H. G. (1985) · Nuclear Science and Engineering · doi:10.13182/nse90-374 · Cited by 316
Janz, G. J., Tomkins, R. P. T., Allen, C. B., Downey, J. R., Garner, G. L., Krebs, U., & Singer, S. K. (1975) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555527 · Cited by 307
Engineering Database of Liquid Salt Thermophysical and Thermochemical Properties
Sohal, M. S., Ebner, M. A., Sabharwall, P., & Sharpe, P. (2010) · doi:10.2172/980801 · Cited by 303
Molten fluorides for nuclear applications
Delpech, S., Cabet, C., Slim, C., & Picard, G. S. (2010) · Materials Today · doi:10.1016/s1369-7021(10)70222-4 · Cited by 257
Corrosion of alloys in a chloride molten salt (NaCl-LiCl) for solar thermal technologies
Gomez-Vidal, J. C., & Tirawat, R. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.05.052 · Cited by 240
Cited by
Ding, W., & Bauer, T. (2021) · Engineering · doi:10.1016/j.eng.2020.06.027 · Cited by 348
Corrosion behaviour of 316 stainless steel in NaCl-KCl-MgCl2 salt vapour at 700°C
Liu, Q., Xu, H., Yin, H., Li, N., Wang, W., Li, L., Tang, Z., & Qian, Y. (2022) · Corrosion Science · doi:10.1016/j.corsci.2021.109921 · Cited by 50
Oxygen-accelerated corrosion of Alloy 800 in a molten LiCl-KCl-MgCl2 eutectic mixture
Rezvanian, M., Gholamzadeh, H., Daub, K., Long, F., Kish, J. R., Daymond, M. R., & Persaud, S. Y. (2026) · Corrosion Science · doi:10.1016/j.corsci.2025.113505 · Cited by 4
Metadata
- Authors
- Guo, S., Zhang, J., Wu, W., & Zhou, W.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 97
- Pages
- 448-487
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W2803841354
- Cited by
- 437
- References
- 52
- FWCI
- 12.67
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Corrosion in the molten fluoride and chloride salts and materials development for nuclear applications. https://app.cochat.ai/papers/10.1016/j.pmatsci.2018.05.003
- The paper
- Guo, S., Zhang, J., Wu, W., & Zhou, W. (2018). Corrosion in the molten fluoride and chloride salts and materials development for nuclear applications. Progress in Materials Science. https://doi.org/10.1016/j.pmatsci.2018.05.003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.