The DOI matches its Crossref record; 140 of the 140 references it cites were found in a registry or an index.
Additive manufacturing of magnetic materials
Abstract
Abstract Additive manufacturing (AM) is an attractive process to manufacture net shape, complex, engineering components with minimum waste; however, it has been largely applied to structural materials. AM of functional materials, such as magnetic materials, has received much less attention. Magnetic materials are of high and growing interest in an extremely wide range of applications, e.g., electronic devices, rotating electrical machines, electric vehicles, wind turbines, magnetic cooling, electromagnetic shielding microphones, mobiles, laptops, etc. The processing of functional materials by AM can result in novel magnetic components with improved performance and lower processing cost, motivating the present review on AM of magnetic materials. We review commonly used AM techniques, their working principles, and applications to magnetic materials. We discuss the use of the laser engineering net shaping (LENS) process to produce soft and hard magnets. This technique can also be readily employed to process compositionally graded structures for accelerated materials development through combinatorial/high throughput investigations. Such graded structures can exhibit a wide range of functional and structural properties. The structural and magnetic properties of AM processed Fe-Si, Ni-Fe, Fe-Co, soft magnetic composites, soft magnetic oxides, magnetic shape memory alloys, magnetocaloric alloys as well as high entropy alloys are described. AM of hard magnetic materials, including Alnico, Sm-Co, Nd-Fe-B and Ce-Co alloys is elucidated. The current and future trends in this area are outlined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2016) · Alloy Phase Diagrams · doi:10.31399/asm.hb.v03.a0006247 · Cited by 16,046
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
Cited by
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
State-of-the-art of selective laser melting process: A comprehensive review
Sefene, E. M. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.04.002 · Cited by 429
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
In-situ alloying in laser-based additive manufacturing processes: A critical review
Mosallanejad, M. H., Niroumand, B., Aversa, A., & Saboori, A. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.159567 · Cited by 271
Mukherjee, T., Elmer, J. W., Wei, H. L., Lienert, T. J., Zhang, W., Kou, S., & DebRoy, T. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101153 · Cited by 267
Metadata
- Authors
- Chaudhary, V., Mantri, S. A., Ramanujan, R. V., & Banerjee, R.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 114
- Pages
- 100688
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W3031840420
- Cited by
- 275
- References
- 140
- FWCI
- 18.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Additive manufacturing of magnetic materials. https://app.cochat.ai/papers/10.1016/j.pmatsci.2020.100688
- The paper
- Chaudhary, V., Mantri, S. A., Ramanujan, R. V., & Banerjee, R. (2020). Additive manufacturing of magnetic materials. Progress in Materials Science. https://doi.org/10.1016/j.pmatsci.2020.100688
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.