The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Rheology and printability: A survey of critical relationships for direct ink write materials design
Open accessAbstract
Direct Ink Write (DIW) is a material extrusion Additive Manufacturing (AM) technique that selectively extrudes material in a layer-by-layer fashion to form 3-dimensional parts. DIW can process a breadth of materials due to the inherent flexibility of its feedstock and the simplicity of its process mechanics (e.g., pressure-induced dispensing through a nozzle, no heat transfer, etc.). As a result, the process has attracted great interest from researchers aiming to develop novel materials for AM . The breadth of materials being introduced for DIW speaks to a need for guidelines for materials design and for a set of analytical characterization techniques that can be used to understand how inks will behave in the DIW process. The DIW process can be separated into three distinct sub-functions: extrusion, solidification, and layer support. Rheological experiments are the primary method used to characterize inks under conditions that mimic the three sub-functions of DIW and predict their printability, e.g. whether they will be successful in DIW printing. A broad range of rheological experiments has been used by researchers to characterize inks and judge their suitability for DIW and this review categorically compiles the predominant techniques. Then, a range of rheology-printability relationships including those derived from observed experimental trends and rigorous analytical models are discussed along with the usefulness and limitations of these relationships. Additional application specific concepts such as bridging and printability maps are further addressed in the context of rheological requirements. Finally, generalizable rheological guidelines of successful DIW inks are provided. This review collectively evaluates rheology-printability relationships in a generalized manner, independent of specific material chemistry or DIW process design. Significant insight into a comprehensive holistic approach for DIW ink development is provided. Lastly, the outlook of this research area is discussed to identify critical gaps in the fundamental understanding of both ink and process design, in the context of a rheological viewpoint.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
3D printing of liquid crystal elastomeric actuators with spatially programed nematic order
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706164 · Cited by 768
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Rapid energy-efficient manufacturing of polymers and composites via frontal polymerization
Robertson, I. D., Yourdkhani, M., Centellas, P. J., Aw, J. E., Ivanoff, D. G., Goli, E., Lloyd, E. M., Dean, L. M., Sottos, N. R., Geubelle, P. H., et al. (2018) · Nature · doi:10.1038/s41586-018-0054-x · Cited by 527
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Hinton, T. J., Hudson, A., Pusch, K., Lee, A., & Feinberg, A. W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00170 · Cited by 437
Outrequin, T. C. R., Gamonpilas, C., Siriwatwechakul, W., & Sreearunothai, P. (2023) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2022.111371 · Cited by 113
Metadata
- Authors
- Rau, D. A., Williams, C. B., & Bortner, M. J.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2023-12
- Volume
- 140
- Pages
- 101188
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W4386648199
- Cited by
- 227
- References
- 6
- FWCI
- 16.49
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Rheology and printability: A survey of critical relationships for direct ink write materials design. https://app.cochat.ai/papers/10.1016/j.pmatsci.2023.101188
- The paper
- Rau, D. A., Williams, C. B., & Bortner, M. J. (2023). Rheology and printability: A survey of critical relationships for direct ink write materials design. Progress in Materials Science. https://doi.org/10.1016/j.pmatsci.2023.101188
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.