The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
A review of heat treatment on polyacrylonitrile fiber
Abstract
Abstract Developing carbon fiber from polyacrylonitrile (PAN) based fiber is generally subjected to three processes namely stabilization, carbonization, and graphitization under controlled conditions. The PAN fiber is first stretched and simultaneously oxidized in a temperature range of 200–300 °C. This treatment converts thermoplastic PAN to a non-plastic cyclic or a ladder compound. After oxidation, the fibers are carbonized at about 1000 °C in inert atmosphere which is usually nitrogen. Then, in order to improve the ordering and orientation of the crystallites in the direction of the fiber axis, the fiber must be heated at about 1500–3000 °C until the polymer contains 92–100%. High temperature process generally leads to higher modulus fibers which expel impurities in the chain as volatile by-products. During heating treatment, the fiber shrinks in diameter, builds the structure into a large structure and upgrades the strength by removing the initial nitrogen content of PAN precursor and the timing of nitrogen. With better-controlled condition, the strength of the fiber can achieve up to 400 GPa after this pyrolysis process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Encyclopedia of physical science and technology
(2002) · Choice Reviews Online · doi:10.5860/choice.39-3718 · Cited by 2,087
Review Carbon fibers for composites
Chand, S. (2000) · Journal of Materials Science · doi:10.1023/a:1004780301489 · Cited by 916
The effect of processing on the structure and properties of carbon fibers
Edie, D. D. (1998) · Carbon · doi:10.1016/s0008-6223(97)00185-1 · Cited by 617
Evolution of structure and properties of PAN precursors during their conversion to carbon fibers
Wangxi, Z., Jie, L., & Gang, W. (2003) · Carbon · doi:10.1016/s0008-6223(03)00391-9 · Cited by 487
Thermal stabilization of polyacrylonitrile fibres
Dalton, S., Heatley, F., & Budd, P. M. (1999) · Polymer · doi:10.1016/s0032-3861(98)00778-2 · Cited by 372
A critical review of the stabilisation of polyacrylonitrile
Bashir, Z. (1991) · Carbon · doi:10.1016/0008-6223(91)90024-d · Cited by 289
David, L. I. B., & Ismail, A. F. (2003) · Journal of Membrane Science · doi:10.1016/s0376-7388(02)00513-6 · Cited by 175
Self-citationBulk and surface chemical functionalities of type III PAN-based carbon fibres
Pamuła, E., & Rouxhet, P. G. (2003) · Carbon · doi:10.1016/s0008-6223(03)00177-5 · Cited by 148
An EELS study of the structural and chemical transformation of PAN polymer to solid carbon
Laffont, L., Monthioux, M., Serin, V., Mathur, R. B., Guímon, C., & Guimon, M. F. (2004) · Carbon · doi:10.1016/j.carbon.2004.04.043 · Cited by 69
Strengthening of Carbon Fibers by Imposition of a High Magnetic Field in a Carbonization Process
Sung, M.-G., Sassa, K., Ogawa, H., Tanimoto, Y., & Asai, S. (2002) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.43.2087 · Cited by 6
Cited by
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
Xue, J., Wu, T., Dai, Y., & Xia, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00593 · Cited by 5,015
Zhang, B., Kang, F., Tarascon, J.-M., & Kim, J.-K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.08.002 · Cited by 720
Polyacrylonitrile-based nanofibers—A state-of-the-art review
Nataraj, S. K., Yang, K. S., & Aminabhavi, T. M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.07.001 · Cited by 662
Fiber-reinforced geopolymer composites: A review
Ranjbar, N., & Zhang, M. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103498 · Cited by 651
A review: carbon nanofibers from electrospun polyacrylonitrile and their applications
Zhang, L., Aboagye, A., Kelkar, A., Lai, C., & Fong, H. (2014) · Journal of Materials Science · doi:10.1007/s10853-013-7705-y · Cited by 612
Carbon-Based Fibers for Advanced Electrochemical Energy Storage Devices
Chen, S., Qiu, L., & Cheng, H.-M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00466 · Cited by 555
Forintos, N., & Czigany, T. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.10.098 · Cited by 487
An artificial interphase enables reversible magnesium chemistry in carbonate electrolytes
Son, S.-B., Gao, T., Harvey, S. P., Steirer, K. X., Stokes, A., Norman, A., Wang, C., Cresce, A., Xu, K., & Ban, C. (2018) · Nature Chemistry · doi:10.1038/s41557-018-0019-6 · Cited by 481
Das, T. K., Ghosh, P., & Das, N. C. (2019) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-018-0072-z · Cited by 469
Electrospun polyimide nanofibers and their applications
Ding, Y., Hou, H., Zhao, Y., Zhu, Z., & Fong, H. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.06.006 · Cited by 452
Hwang, T. H., Jung, D. S., Kim, J.-S., Kim, B. G., & Choi, J. W. (2013) · Nano Letters · doi:10.1021/nl402513x · Cited by 441
Recent Progress in Fabrication, Structure, and Properties of Carbon Fibers
Liu, Y., & Kumar, S. (2012) · Polymer Reviews · doi:10.1080/15583724.2012.705410 · Cited by 425
Electrospinning: Processes, Structures, and Materials
Ahmadi Bonakdar, M., & Rodrigue, D. (2024) · Macromol · doi:10.3390/macromol4010004 · Cited by 380
Yusof, N., & Ismail, A. F. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.10.001 · Cited by 374
Self-citationStrong carbon nanofibers from electrospun polyacrylonitrile
Arshad, S. N., Naraghi, M., & Chasiotis, I. (2011) · Carbon · doi:10.1016/j.carbon.2010.12.056 · Cited by 355
Khayyam, H., Jazar, R. N., Nunna, S., Golkarnarenji, G., Badii, K., Fakhrhoseini, S. M., Kumar, S., & Naebe, M. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100575 · Cited by 325
Kowalik, M., Ashraf, C., Damirchi, B., Akbarian, D., Rajabpour, S., & van Duin, A. C. T. (2019) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.9b04298 · Cited by 305
Hassan, M. F., Sabri, M. A., Fazal, H., Hafeez, A., Shezad, N., & Hussain, M. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.104715 · Cited by 305
Peng, S., Li, L., Kong Yoong Lee, J., Tian, L., Srinivasan, M., Adams, S., & Ramakrishna, S. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.001 · Cited by 304
Electrospinning‐Based Strategies for Battery Materials
Li, X., Chen, W., Qian, Q., Huang, H., Chen, Y., Wang, Z., Chen, Q., Yang, J., Li, J., & Mai, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000845 · Cited by 302
Tundwal, A., Kumar, H., Binoj, B. J., Sharma, R., Kumar, G., Kumari, R., Dhayal, A., Yadav, A., Singh, D., & Kumar, P. (2024) · RSC Advances · doi:10.1039/d3ra08312h · Cited by 302
Fang, W., Yang, S., Wang, X.-L., Yuan, T.-Q., & Sun, R.-C. (2017) · Green Chemistry · doi:10.1039/c6gc03206k · Cited by 301
Fabrication of carbon nanofiber–polyaniline composite flexible paper for supercapacitor
Yan, X., Tai, Z., Chen, J., & Xue, Q. (2011) · Nanoscale · doi:10.1039/c0nr00470g · Cited by 294
Recent progress in rechargeable lithium batteries with organic materials as promising electrodes
Xie, J., & Zhang, Q. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01069e · Cited by 278
Yoon, K. R., Shin, K., Park, J., Cho, S.-H., Kim, C., Jung, J.-W., Cheong, J. Y., Byon, H. R., Lee, H. M., & Kim, I.-D. (2018) · ACS Nano · doi:10.1021/acsnano.7b03794 · Cited by 277
Recent advances in fibre-hybrid composites: materials selection, opportunities and applications
Swolfs, Y., Verpoest, I., & Gorbatikh, L. (2019) · International Materials Reviews · doi:10.1080/09506608.2018.1467365 · Cited by 259
Carbonization: A feasible route for reutilization of plastic wastes
Chen, S., Liu, Z., Jiang, S., & Hou, H. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.136250 · Cited by 213
Roy, P. S., Garnier, G., Allais, F., & Saito, K. (2021) · ChemSusChem · doi:10.1002/cssc.202100904 · Cited by 176
Additive Manufacturing of Carbon Using Commodity Polypropylene
Smith, P., Obando, A. G., Griffin, A., Robertson, M., Bounds, E., & Qiang, Z. (2023) · Advanced Materials · doi:10.1002/adma.202208029 · Cited by 42
Aftabuzzaman, M., Shamsuddin Ahmed, M., Matyjaszewski, K., & Kyu Kim, H. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.137249 · Cited by 42
Roberts, A. D., Lee, J.-S. M., Wong, S. Y., Li, X., & Zhang, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09078h · Cited by 36
Metadata
- Authors
- Rahaman, M. S. A., Ismail, A. F., & Mustafa, A.
- Venue
- Polymer Degradation and Stability
- Publisher
- Elsevier BV
- Published
- 2007-08
- Volume
- 92
- Issue
- 8
- Pages
- 1421-1432
- ISSN
- 0141-3910 (ISSN-L)
- OpenAlex
- W1980282438
- Cited by
- 1,412
- References
- 10
- FWCI
- 29.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.