The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Degradability of linear polyolefins under natural weathering
Open accessAbstract
High density polyethylene (HDPE), linear low density polyethylene (LLDPE), and isotactic polypropylene (PP) containing antioxidant additives at low or zero levels were extruded and blown moulded as films. An HDPE/LLDPE commercial blend containing a pro-oxidant additive (i.e., an oxo-biodegradable blend) was taken from the market as supermarket bag. These four polyolefin samples were exposed to natural weathering for one year during which their structure and thermal and mechanical properties were monitored. This study shows that the real durability of olefin polymers may be much shorter than centuries, as in less than one year the mechanical properties of all samples decreased virtually to zero, as a consequence of severe oxidative degradation, that resulted in substantial reduction in molar mass accompanied by a significant increase in content of carbonyl groups. PP and the oxo-bio HDPE/LLDPE blend degraded very rapidly, whereas HDPE and LLDPE degraded more slowly, but significantly in a few months. The main factors influencing the degradability were the frequency of tertiary carbon atoms in the chain and the presence of a pro-oxidant additive. The primary (sterically hindered phenol) and secondary (phosphite) antioxidant additives added to PP slowed but did not prevent rapid photo-oxidative degradation, and in HDPE and LLDPE the secondary antioxidant additive had little influence on the rate of abiotic degradation at the concentrations used here.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles of polymer chemistry
(1995) · Choice Reviews Online · doi:10.5860/choice.33-2140 · Cited by 15,218
Encyclopedia of polymer science and technology
(2003) · Choice Reviews Online · doi:10.5860/choice.41-0674 · Cited by 5,095
Physical Properties of Polymers Handbook
(2007) · Springer eBooks · doi:10.1007/978-0-387-69002-5 · Cited by 3,429
Microbial Ecology: Fundamentals and Applications
Atlas, R. M., & Bartha, R. (1978) · Cited by 1,255
Microbial Ecology: Fundamentals and Applications.
Swift, M. J., Atlas, R. M., & Bartha, R. (1982) · The Journal of Ecology · doi:10.2307/2259932 · Cited by 1,100
(1991) · Additives for Polymers · doi:10.1016/0306-3747(91)90486-6 · Cited by 935
Principles of Polymer Chemistry
Ravve, A. (2012) · Springer eBooks · doi:10.1007/978-1-4614-2212-9 · Cited by 693
Handbook of Polyethylene: Structures: Properties, and Applications
Peacock, A. J. (2000) · Medical Entomology and Zoology · Cited by 474
Polymer Photodegradation: Mechanisms and experimental methods
Rabek, J. F. (2012) · Cited by 455
Marine microbe-mediated biodegradation of low- and high-density polyethylenes
Sudhakar, M., Doble, M., Murthy, P. S., & Venkatesan, R. (2008) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2007.07.011 · Cited by 441
Degradation profile of polyethylene after artificial accelerated weathering
Gulmine, J. V., Janissek, P. R., Heise, H. M., & Akcelrud, L. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00338-5 · Cited by 420
Degradable polymers : principles and applications
SCOTT, G., & Gilead, D. (1995) · Cited by 315
Biodegradation of thermally-oxidized, fragmented low-density polyethylenes
Chiellini, E., Corti, A., & Swift, G. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00105-8 · Cited by 295
Degradable polymers: Principles and applications
Billingham, N. C. (1996) · Polymer Degradation and Stability · doi:10.1016/0141-3910(96)90012-9 · Cited by 262
Crystallization and melting behaviour of photodegraded polypropylene — I. Chemi-crystallization
Rabello, M. S., & White, J. R. (1997) · Polymer · doi:10.1016/s0032-3861(97)00213-9 · Cited by 238
Biodegradation: Problems of Molecular Recalcitrance and Microbial Fallibility
Alexander, M. (1965) · Advances in Applied Microbiology · doi:10.1016/s0065-2164(08)70383-6 · Cited by 236
Chiellini, E., Corti, A., D'Antone, S., & Baciu, R. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.03.022 · Cited by 231
Environmental Degradation of Polyethylene
Hakkarainen, M., & Albertsson, A.-C. (2004) · Advances in Polymer Science · doi:10.1007/b13523 · Cited by 228
Degradation of unpretreated and thermally pretreated polypropylene by soil consortia
Arkatkar, A., Arutchelvi, J., Bhaduri, S., Uppara, P. V., & Doble, M. (2009) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2008.06.005 · Cited by 221
Polyolefins with controlled environmental degradability
Wiles, D. M., & Scott, G. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.09.010 · Cited by 214
Scott, G. (1999) · Royal Society of Chemistry eBooks · doi:10.1039/9781847551726 · Cited by 180
Corti, A., Muniyasamy, S., Vitali, M., Imam, S. H., & Chiellini, E. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.02.018 · Cited by 179
Corrales, T., Catalina, F., Peinado, C., Allen, N. S., & Fontán, E. (2002) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/s1010-6030(01)00629-3 · Cited by 156
Gächter, R., & Müller, H. (1993) · Cited by 148
Chemical and morphologial modifications of irradiated linear low density polyethylene (LLDPE)
Guadagno, L., Naddeo, C., Vittoria, V., Camino, G., & Cagnani, C. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00024-6 · Cited by 119
Photo‐induced scission and crosslinking in LDPE, LLDPE, and HDPE
Craig, I. H., White, J. R., Shyichuk, A., & Syrotynska, I. (2005) · Polymer Engineering and Science · doi:10.1002/pen.20313 · Cited by 67
Photooxidation of high polymers
Winslow, F. H. (1977) · Pure and Applied Chemistry · doi:10.1351/pac197749040495 · Cited by 53
Naddeo, C., Guadagno, L., & Vittoria, V. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.04.005 · Cited by 51
Research works printed but not linked: 3
- Takeuchi, 1969, Near-infrared spectrophotometric analysis of ethylene-propylene copolymers, Anal Chem, 41, 184, 10.1021/ac60270a029 · doi:10.1021/ac60270a029
- Iring, 1986, Thermal oxidation of linear low density polyethylene, Polym Degrad Stab, 14, 319, 10.1016/0141-3910(86)90036-4 · doi:10.1016/0141-3910(86)90036-4
- Rabello, 1997, Crystallization and melting behavior of photodegraded polypropylene. 2. Recrystallization of degraded molecules, Polymer, 38, 6389, 10.1016/S0032-3861(97)00214-0 · doi:10.1016/s0032-3861(97)00214-0
Cited by
Degradation rates of plastics in the environment
Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., & Suh, S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06635 · Cited by 3,463
Understanding plastic degradation and microplastic formation in the environment: A review
Zhang, K., Hamidian, A. H., Tubić, A., Zhang, Y., Fang, J. K. H., Wu, C., & Lam, P. K. S. (2021) · Environmental Pollution · doi:10.1016/j.envpol.2021.116554 · Cited by 1,539
Microbial and Enzymatic Degradation of Synthetic Plastics
Mohanan, N., Montazer, Z., Sharma, P. K., & Levin, D. B. (2020) · Frontiers in Microbiology · doi:10.3389/fmicb.2020.580709 · Cited by 1,122
Persistence of Plastic Litter in the Oceans
Andrady, A. L. (2015) · Marine Anthropogenic Litter · doi:10.1007/978-3-319-16510-3_3 · Cited by 667
Almond, J., Sugumaar, P., Wenzel, M. N., Hill, G., & Wallis, C. (2020) · e-Polymers · doi:10.1515/epoly-2020-0041 · Cited by 601
Metadata
- Authors
- Ojeda, T., Freitas, A., Birck, K., Dalmolin, E., Jacques, R., Bento, F., & Camargo, F.
- Venue
- Polymer Degradation and Stability
- Publisher
- Elsevier BV
- Published
- 2011-04
- Volume
- 96
- Issue
- 4
- Pages
- 703-707
- ISSN
- 0141-3910 (ISSN-L)
- OpenAlex
- W2073176776
- Cited by
- 284
- References
- 28
- FWCI
- 3.66
- Type
- journal article
- Language
- en
- Open access
- bronze
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/open-access/userlicense/1.0/ (vor, 843 d)
- Funders
- National Council for Scientific and Technological Development
- Coordination for the Improvement of Higher Education Personnel
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.