Material valorisation of amorphous polylactide. Influence of thermo-mechanical degradation on the morphology, segmental dynamics, thermal and mechanical performance
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
This paper reports the effects of multiple mechanical recycling on the structure and properties of amorphous polylactide (PLA). The influence of the thermo-mechanical degradation induced by means of five successive injection cycles was initially addressed in terms of macroscopic mechanical properties and surface modification. A deeper inspection on the structure and morphology of PLA was associated to the thermal properties and viscoelastic behaviour. Although FT-IR analysis did not show significant changes in functional groups, a remarkable reduction in molar mass was found by viscometry. PLA remained amorphous throughout the reprocessing cycles, but the occurrence of a cold-crystallization during DSC and DMTA measurements, which enthalpy increased with each reprocessing step, suggested chain scission due to thermo-mechanical degradation. The effect of chain shortening on the glass-rubber relaxation studied by DMTA showed an increase in free volume affecting the segmental dynamics of PLA, particularly after the application of the second reprocessing step, in connection to the overall loss of performance showed by the remaining properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Carrasco, F., Pagès, P., Gámez-Pérez, J., Santana, O. O., & Maspoch, M. L. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.045 · Cited by 738
Pan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679
Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid)
Pillin, I., Montrelay, N., Bourmaud, A., & Grohens, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.12.005 · Cited by 289
Torres, N., Robin, J. J., & Boutevin, B. (2000) · European Polymer Journal · doi:10.1016/s0014-3057(99)00301-8 · Cited by 248
Crystallization kinetics of virgin and processed poly (lactic acid)
Pantani, R., De Santis, F., Sorrentino, A., De Maio, F., & Titomanlio, G. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.04.018 · Cited by 161
Spinu, M., Jackson, C., Keating, M. Y., & Gardner, K. H. (1996) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329608014922 · Cited by 158
Cited by
Recycling of bioplastics, their blends and biocomposites: A review
Soroudi, A., & Jakubowicz, I. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.07.025 · Cited by 432
3D printing filament as a second life of waste plastics—a review
Mikula, K., Skrzypczak, D., Izydorczyk, G., Warchoł, J., Moustakas, K., Chojnacka, K., & Witek-Krowiak, A. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-10657-8 · Cited by 382
Degradation and Recycling of Films Based on Biodegradable Polymers: A Short Review
Scaffaro, R., Maio, A., Sutera, F., Gulino, E., & Morreale, M. (2019) · Polymers · doi:10.3390/polym11040651 · Cited by 254
Review on the Degradation of Poly(lactic acid) during Melt Processing
Velghe, I., Buffel, B., Vandeginste, V., Thielemans, W., & Desplentere, F. (2023) · Polymers · doi:10.3390/polym15092047 · Cited by 146
Dedieu, I., Peyron, S., Gontard, N., & Aouf, C. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107620 · Cited by 84
Metadata
- Authors
- Badia, J. D., Strömberg, E., Karlsson, S., & Ribes-Greus, A.
- Venue
- Polymer Degradation and Stability
- Publisher
- Elsevier BV
- Published
- 2012-04
- Volume
- 97
- Issue
- 4
- Pages
- 670-678
- ISSN
- 0141-3910 (ISSN-L)
- OpenAlex
- W1971072312
- Cited by
- 155
- References
- 8
- FWCI
- 4.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Material valorisation of amorphous polylactide. Influence of thermo-mechanical degradation on the morphology, segmental dynamics, thermal and mechanical performance. https://app.cochat.ai/papers/10.1016/j.polymdegradstab.2011.12.019
- The paper
- Badia, J. D., Strömberg, E., Karlsson, S., & Ribes-Greus, A. (2012). Material valorisation of amorphous polylactide. Influence of thermo-mechanical degradation on the morphology, segmental dynamics, thermal and mechanical performance. Polymer Degradation and Stability. https://doi.org/10.1016/j.polymdegradstab.2011.12.019
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.