The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Solution spraying of poly(methyl methacrylate) blends to fabricate microtextured, superoleophobic surfaces
Open accessAbstract
Abstract We describe a simple technique to prepare superhydrophobic and superoleophobic microtextured surfaces by spray coating a blend of poly(methyl methacrylate) (PMMA) and the low surface energy molecule 1H,1H,2H,2H-heptadecafluorodecyl polyhedral oligomeric silsesquioxane (fluorodecyl POSS, γsv ≈ 10 mN/m) using an air brush with a pressurized nitrogen stream. Scanning electron micrographs show the formation of microtextured surfaces possessing re-entrant curvature; a critical feature for obtaining liquid repellency with low surface tension liquids. The surface morphology can be tuned systematically from a corpuscular or spherical microstructure to a beads-on-string structure and finally to bundled fibers by controlling the solution concentration and molecular weight of the sprayed polymer. The oleophobicity of the resulting structures is characterized by advancing and receding contact angle measurements with liquids of a range of surface tensions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Cited by
Yong, J., Chen, F., Yang, Q., Huo, J., & Hou, X. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00751a · Cited by 810
Chu, Z., & Seeger, S. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60415b · Cited by 621
Bio-inspired superoleophobic and smart materials: Design, fabrication, and application
Liu, K., Tian, Y., & Jiang, L. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.11.001 · Cited by 570
Bellanger, H., Darmanin, T., Taffin de Givenchy, E., & Guittard, F. (2014) · Chemical Reviews · doi:10.1021/cr400169m · Cited by 530
A Review of the Fundamental Principles and Applications of Solution Blow Spinning
Daristotle, J. L., Behrens, A. M., Sandler, A. D., & Kofinas, P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12994 · Cited by 443
Metadata
- Authors
- Srinivasan, S., Chhatre, S. S., Mabry, J. M., Cohen, R. E., & McKinley, G. H.
- Venue
- Polymer
- Publisher
- Elsevier BV
- Published
- 2011-06
- Volume
- 52
- Issue
- 14
- Pages
- 3209-3218
- ISSN
- 0032-3861 (ISSN-L)
- OpenAlex
- W2030254772
- Cited by
- 207
- References
- 2
- FWCI
- 7.46
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.