Markedly improving mechanical properties for isotactic polypropylene with large-size spherulites by pressure-induced flow processing

Nylon 6 nanocomposites by melt compounding

Cho, J. W., & Paul, D. R. (2001) · Polymer · doi:10.1016/s0032-3861(00)00380-3 · Cited by 1,051 · see citing works

Polypropylene/calcium carbonate nanocomposites

Chan, C., Wu, J., Li, J., & Cheung, Y.-K. (2002) · Polymer · doi:10.1016/s0032-3861(02)00120-9 · Cited by 932 · see citing works

Fabrication of exfoliated graphene-based polypropylene nanocomposites with enhanced mechanical and thermal properties

Song, P., Cao, Z., Cai, Y., Zhao, L., Fang, Z., & Fu, S. (2011) · Polymer · doi:10.1016/j.polymer.2011.06.045 · Cited by 624 · see citing works

Scratching maps for polymers

Briscoe, B. J., Evans, P. D., Pelillo, E., & Sinha, S. K. (1996) · Wear · doi:10.1016/s0043-1648(96)07314-0 · Cited by 340 · see citing works

13th European Conference on Composite Materials

none (2009) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1179/174328909x387784 · Cited by 265 · see citing works

Morphology and mechanical properties of polypropylene/organoclay nanocomposites

Svoboda, P., Zeng, C., Wang, H., Lee, L. J., & Tomasko, D. L. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10789 · Cited by 253 · see citing works

Crystallization behavior and mechanical properties of polypropylene/halloysite composites

Ning, N., Yin, Q., Luo, F., Zhang, Q., Du, R., & Fu, Q. (2007) · Polymer · doi:10.1016/j.polymer.2007.10.005 · Cited by 241 · see citing works

On the existence of near-range order in isotactic polypropylenes

Miller, R. L. (1960) · Polymer · doi:10.1016/0032-3861(60)90021-5 · Cited by 222 · see citing works

Scratch hardness and deformation maps for polycarbonate and polyethylene

Briscoe, B. J., Pelillo, E., & Sinha, S. K. (1996) · Polymer Engineering and Science · doi:10.1002/pen.10702 · Cited by 204 · see citing works

Influence of molecular parameters on high-strain deformation of polyethylene in the plane-strain compression. Part I. Stress–strain behavior

Bartczak, Z., & Kozanecki, M. (2005) · Polymer · doi:10.1016/j.polymer.2005.06.100 · Cited by 108 · see citing works

Segmental Motion in Polypropylene

Sauer, J. A., Wall, R. A., Fuschillo, N., & WOODWARD, A. E. (1958) · Journal of Applied Physics · doi:10.1063/1.1722954 · Cited by 81 · see citing works

Changes in the morphology and orientation of bulk spherulitic polypropylene due to plane-strain compression

Pluta, M., Bartczak, Z., & Gałęski, A. (2000) · Polymer · doi:10.1016/s0032-3861(99)00364-x · Cited by 77 · see citing works

Ultrasonic oscillations induced morphology and property development of polypropylene/montmorillonite nanocomposites

Zhao, L., Li, J., Guo, S., & Du, Q. (2006) · Polymer · doi:10.1016/j.polymer.2006.02.011 · Cited by 74 · see citing works

Morphological Characteristics of 1,3:2,4-Dibenzylidene Sorbitol/Poly(propylene glycol) Organogels

Mercurio, D. J., & Spontak, R. J. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp002247o · Cited by 72 · see citing works

Nucleating Agents in Polypropylene

Nagarajan, K., Levón, K., & Myerson, A. S. (2000) · Journal of Thermal Analysis and Calorimetry · doi:10.1023/a:1010197609840 · Cited by 69 · see citing works

Influence of molecular parameters on high-strain deformation of polyethylene in the plane-strain compression. Part II. Strain recovery

Bartczak, Z. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.096 · Cited by 50 · see citing works

Microstructural aspects of surface deformation processes and fracture of tensile strained high isotactic polypropylene

Dasari, A., Rohrmann, J., & Misra, R. D. K. (2003) · Materials Science and Engineering A · doi:10.1016/s0921-5093(03)00331-9 · Cited by 49 · see citing works

Further comments on the relation between hydraulic permeation and diffusion

Paul, D. R. (1974) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1974.180120618 · Cited by 47 · see citing works

Structure and properties of isotactic polypropylene oriented by rolling with side constraints

Bartczak, Z., MORAWIEC, J., & Gałęski, A. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11293 · Cited by 46 · see citing works

Poly(2-hydroxyethyl methacrylate-co-sulfobetaine) hydrogels. II. Synthesis and swelling behaviors of the [2-hydroxyethyl methacrylate-co-3-dimethyl(methacryloyloxyethyl)ammonium propane sulfonate] hydrogels

Lee, W., & Chen, C.-F. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980906)69:10 · Cited by 45 · see citing works

Morphology and mechanical properties of polypropylene/poly (propylene-1-octene) in-reactor alloys prepared by Metallocene/Ziegler–Natta hybrid catalyst

Wang, J., Niu, H., Dong, J., Du, J. H., & Han, C. C.-C. (2012) · Polymer · doi:10.1016/j.polymer.2012.02.017 · Cited by 41 · see citing works

Molecular Dynamics of Nucleation and Crystallization of Polymers

Nagarajan, K., & Myerson, A. S. (2001) · Crystal Growth & Design · doi:10.1021/cg0055124 · Cited by 39 · see citing works

Deformation and fracture of polystyrene/polypropylene blends: A simulation study

Deng, S., Zhao, X., Huang, Y., Han, X., Liu, H., & Hu, Y. (2011) · Polymer · doi:10.1016/j.polymer.2011.09.050 · Cited by 37 · see citing works

Effect of hydrostatic pressure and temperature on the mechanical loss properties of polymers: 1. Polyethylene and polypropylene

Parry, E. J., & Tabor, D. (1973) · Polymer · doi:10.1016/0032-3861(73)90035-9 · Cited by 33 · see citing works

Density‐independent relaxations in polypropylene

McCrum, N. G. (1964) · Journal of Polymer Science Part B Polymer Letters · doi:10.1002/pol.1964.110020504 · Cited by 33 · see citing works

Morphologies of microphase-separated conformationally asymmetric diblock copolymers

Pochan, D. J., Gido, S. P., Jian, Z., Mays, J. W., Whitmore, M. D., & Ryan, A. J. (1998) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/(sici)1099-0488(19971130)35:16 · Cited by 21 · see citing works

Effects of swelling and annealing on the viscoelastic behavior of solution‐crystallized and melt‐crystallized samples of fractionated polypropylene

Inamura, I., Ochiai, H., & Yamamura, H. (1976) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1976.180140707 · Cited by 7 · see citing works

Modification of polymers using multilayered “smart pellet” additives: Part II

Wang, Y., Milliman, H. W., Connor, D. M., Mehl, N. A., & Schiraldi, D. A. (2011) · Polymer · doi:10.1016/j.polymer.2011.04.036 · Cited by 6 · see citing works

2009 International Conference on Advanced Fibers and Polymer Materials

Ishihara, H. (2009) · Sen i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan) · doi:10.4188/transjtmsj.62.758 · Cited by 6 · see citing works

Facile preparation of open-cellular porous poly (l-lactic acid) scaffold by supercritical carbon dioxide foaming for potential tissue engineering applications

Kuang, T., Chen, F., Chang, L., Zhao, Y., Fu, D., Gong, X. N., & Peng, X. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.023 · Cited by 221 · see citing works

Quantification of the Effect of Shish-Kebab Structure on the Mechanical Properties of Polypropylene Samples by Controlling Shear Layer Thickness

Mi, D., Xia, C., Jin, M., Wang, F., Shen, K., & Zhang, J. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00822 · Cited by 110 · see citing works

Property enhancement of PP-EPDM thermoplastic vulcanizates via shear-induced break-up of nano-rubber aggregates and molecular orientation of the matrix

Zhao, Y., Liu, Z., Su, B., Chen, F., Fu, Q., Ning, N., & Tian, M. (2015) · Polymer · doi:10.1016/j.polymer.2015.03.011 · Cited by 61 · see citing works

Supercritical CO2 foaming of pressure-induced-flow processed linear polypropylene

Fu, D., Chen, F., Kuang, T., Li, D., Peng, X., Chiu, D. Y., Lin, C. S., & Lee, L. J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.012 · Cited by 50 · see citing works

Slowing crystallization to enhance interlayer strength of 3D printed poly (ether ether ketone) parts by molecular design

Shang, Y., Xu, Q., Jiang, B., Yang, Y., Liu, X. H., Jiang, Z., Yu, C. Y., Li, X., & Zhang, H. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103104 · Cited by 47 · see citing works

Enhanced Dielectric Breakdown Property of Polypropylene Based on Mesoscopic Structure Modulation by Crystal Phase Transformation for High Voltage Power Cable Insulation

Wu, Y., Li, Z., Wang, H., Zheng, Z., & Du, B. X. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c00251 · Cited by 34 · see citing works

A facile strategy for preparation of strong tough poly(lactic acid) foam with a unique microfibrillated bimodal micro/nano cellular structure

Xiang, P., Gou, L., Zou, Y., Chen, B., Bi, S., Chen, X., & Yu, P. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.12.187 · Cited by 30 · see citing works

Effects of Sodium Salt and Sorbitol-Derivative Nucleating Agents on Physical Properties Related to Crystal Structure and Orientation of Polypropylene

Rungswang, W., Thongsak, K., Prasansuklarb, A., Plailahan, K., Saendee, P., Rugmai, S., & Cheevasrirungruang, W. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4039136 · Cited by 29 · see citing works

Ultrasound-assisted-pressure-induced-flow leading to superior polymer/carbon nanotube composites and foams

Li, D., Fu, D., Yen, Y.-C., Benatar, A., Peng, X., Chiu, D. Y., & Lee, L. J. (2015) · Polymer · doi:10.1016/j.polymer.2015.10.058 · Cited by 26 · see citing works

Isotactic polypropylene reinforced atactic polypropylene by formation of shish-kebab superstructure

Zhang, Z., Deng, L., Lei, J., & Li, Z. (2015) · Polymer · doi:10.1016/j.polymer.2015.09.070 · Cited by 25 · see citing works

Fabrication of high strength PA6/PP blends with pressure-induced-flow processing

Fu, D., Kuang, T., Chen, F., Lee, L. J., & Peng, X. (2015) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2015.08.043 · Cited by 24 · see citing works

Enhanced strength and foamability of high-density polyethylene prepared by pressure-induced flow and low-temperature crosslinking

Kuang, T., Chen, F., Fu, D., Chang, L., Peng, X., & Lee, L. J. (2016) · RSC Advances · doi:10.1039/c6ra05238j · Cited by 23 · see citing works

Study on biocompatible PLLA–PEG blends with high toughness and strength via pressure-induced-flow processing

Feng, X., Zhang, S., Zhu, S., Han, K., Jiao, M., Song, J., Ma, Y., & Yu, M. (2013) · RSC Advances · doi:10.1039/c3ra40899j · Cited by 21 · see citing works

Polyamide 6 modified polypropylene with remarkably enhanced mechanical performance, thermal properties, and foaming ability via pressure‐induced‐flow processing approach

Fu, D., Chen, F., Peng, X., & Kuang, T. (2018) · Advances in Polymer Technology · doi:10.1002/adv.21945 · Cited by 21 · see citing works

Crystallization behavior of polypropylene/graphene nanoplatelets composites

Beuguel, Q., Boyer, S. A. E., Settipani, D., Monge, G., Haudin, J. M., Vergnes, B., & Peuvrel‐Disdier, E. (2018) · Polymer Crystallization · doi:10.1002/pcr2.10024 · Cited by 21 · see citing works

Non-isothermal crystallization kinetics and its effect on the mechanical properties of homopolymer isotactic polypropylene

Nouira, S., Hassine, T., Fitoussi, J., Shirinbayan, M., Gamaoun, F., & Tcharkhtchi, A. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02869-4 · Cited by 19 · see citing works

Bioinspired nacre-like PEEK material with superior tensile strength and impact toughness

Zhu, S., Yan, T., Huang, X., Hassan, E. A. M., Zhou, J., Zhang, S., Xiong, M., Yu, M., & Li, Z. (2022) · RSC Advances · doi:10.1039/d2ra00667g · Cited by 19 · see citing works

PBT plasticity loss induced by oxidative and hydrolysis ageing

Loyer, C., Régnier, G., Duval, V., Ould, Y., & Richaud, E. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109368 · Cited by 18 · see citing works

Preparation of PLA with High Impact‐Toughness and Reduced Internal Stress via Formation of Laminated, Bimodal Structure with Micro/Nanocells

Xiang, P., Bi, S., Mei, F., Deng, C., Yu, D., Chen, X., & Yu, P. (2021) · Macromolecular Materials and Engineering · doi:10.1002/mame.202100426 · Cited by 17 · see citing works

A new way of strengthening and toughening for carbon fiber reinforced polyphenylene sulfide (CF/PPS) composites via matrix modification

Xu, Y., Zhu, S., Zhang, Z., Yu, M., & Xiangkai, Y. (2017) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-017-1747-y · Cited by 14 · see citing works

Chemical, physical, and mechanical properties evolution in electron beam irradiated isotactic polypropylene

Maeda, E. A., Santos, A. F., Silva, L. G. D. A. E., & Schön, C. G. (2015) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2015.11.027 · Cited by 14 · see citing works

Polyamide-6 structuration induced by a chemical reaction with a polyether triamine in the molten state

Auclerc, M., Tauleigne, A., Boisson, F., Bergeron, A. V., Garois, N., Fulchiron, R., Sudre, G., Cassagnau, P., & Bounor‐Legaré, V. (2019) · Polymer · doi:10.1016/j.polymer.2019.03.033 · Cited by 14 · see citing works

Effect of Different Shear Modes on Morphology and Mechanical Properties of Polypropylene Pipes Produced by Rotational Shear

Zhou, W.-C., Du, Z., Yang, H., Li, J., Zhang, Y., Gao, X., & Fu, Q. (2020) · Chinese Journal of Polymer Science · doi:10.1007/s10118-020-2477-8 · Cited by 14 · see citing works

Novel Solar Thermal Collector Systems in Polymer Design – Part 3: Aging Behavior of PP Absorber Materials

Povacz, M., Wallner, G. M., Grabmann, M. K., Beißmann, S., Grabmayer, K., Buchberger, W. W., & Lang, R. W. (2016) · Energy Procedia · doi:10.1016/j.egypro.2016.06.280 · Cited by 13 · see citing works

Preparation and balanced mechanical properties of solid and foamed isotactic polypropylene/ SEBS composites

Zhang, X., Sun, B., Yuan, G., Zhang, S., Ji, Y., Liu, B., Zhang, M., Yang, Y., & Chen, J. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.50342 · Cited by 12 · see citing works

The influence of hoop shear field on the structure and performances of glass fiber reinforced three‐layer polypropylene random copolymer pipe

Deng, C., Jin, B., Zhao, Z., Shen, K., & Zhang, J. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46985 · Cited by 12 · see citing works

Annealing‐induced high impact toughness of immiscible isotactic polypropylene/poly(acrylonitrile‐butadiene‐styrene) blend

Liu, J., Jiang, D., & Li, Z. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5653 · Cited by 11 · see citing works

The Influence of Pressure-Induced-Flow Processing on the Morphology, Thermal and Mechanical Properties of Polypropylene Blends

Li, P., Fei, Y., Ruan, S., Yang, J., Chen, F., & Jin, Y. (2021) · Journal of Composites Science · doi:10.3390/jcs5030064 · Cited by 8 · see citing works

Fabrication of hierarchically crystallographic morphologies in isotactic polypropylene

Wang, M., Yuan, J., Luo, S., & Zeng, J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42703 · Cited by 8 · see citing works

Tough and strong polyamide 6,6 with oriented morphologies via pressure induced flow processing

Zhu, S., Han, K., Ao, T., Zhang, S., Ma, Y., & Yu, M. (2013) · Materials Research Innovations · doi:10.1179/1432891713z.000000000211 · Cited by 7 · see citing works

In‐situ generation of biodegradable poly(lactic acid)/poly(butylene succinate) nanofibrillar composites via a facile and cost‐effective strategy of pressure‐induced flow processing

Yu, P., Li, S., Wei, Z., Peng, C., Cao, N., Wan, C., Bi, S., & Chen, X. (2023) · Polymers for Advanced Technologies · doi:10.1002/pat.6016 · Cited by 6 · see citing works

Simultaneously Boosting Toughness and Tensile Strength for Polyamide 6/montmorillonite Nanocomposite by a Pressure-Induced Flow Field

Zhu, S., Han, K., Zhang, S., Jiang, Z., Qian, H., Ma, Y., & Yu, M. (2014) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2013.810108 · Cited by 6 · see citing works

Heat-Resistant and Self-Reinforced Polylactide through Stereocomplexation and In Situ Orientation

Sun, M., Zhang, Z., Xiao, X., Liu, J., Yan, W., Han, K., & Yu, M. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c03415 · Cited by 5 · see citing works

Prediction of compatibility and chemical structure influencing plasticization of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P3HB4HB)

Vasseur, E., Leveuf, L., Saux, V. L., & Bruzaud, S. (2025) · Polymer · doi:10.1016/j.polymer.2025.128872 · Cited by 5 · see citing works

Property mapping of LDPE during 3D printing: evaluating morphological development with X-ray scattering

da Silva, D. P., Pinheiro, J., Abdulghani, S., Kamma‐Lorger, C. S., Martínez, J. C., Solano, E., Mateus, A., Pascoal‐Faria, P., & Mitchell, G. R. (2023) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2023.1232562 · Cited by 5 · see citing works

Preparation of poly(lactic acid) with excellent comprehensive properties via simple deformation or microfibrillation of spherulites

Xiang, P., Fan, L., Li, S., Cao, N., Wan, C., Bi, S., Chen, X., & Yu, P. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51539 · Cited by 4 · see citing works

Synergistic toughening of polylactide by layer structure and network structure

Sun, M., Zhang, Z., He, Y., Yan, W., Yu, M., & Han, K. (2024) · Polymer · doi:10.1016/j.polymer.2024.127969 · Cited by 3 · see citing works

Bioresorbable High-Strength HA/PLLA Composites for Internal Fracture Fixation

Liu, J., Sun, M., He, Y., Yan, W., Yu, M., & Han, K. (2025) · Molecules · doi:10.3390/molecules30091889 · Cited by 3 · see citing works

Simultaneous Improvement of Strength and Toughness of Poly(lactic acid) via Multiple Dynamic Pressure

Rao, W.-X., Li, L., Zhang, S.-H., Huang, G.-M., Zheng, J.-C., Yuan, C., Huang, Z.-X., & Qu, J.-P. (2025) · Chinese Journal of Polymer Science · doi:10.1007/s10118-025-3379-6 · Cited by 2 · see citing works

Effect of Nucleating Agent on the Structure and Mechanical Properties of Oriented PET

Xu, Q., & Meng, X. K. (2014) · Advanced materials research · doi:10.4028/www.scientific.net/amr.912-914.445 · Cited by 3 · see citing works

EFFECT OF NUCLEATING AGENTS ON PHYSICAL-MECHANICAL PROPERTIES

(2021) · Elsevier eBooks · doi:10.1016/b978-1-927885-81-9.50015-9 · Cited by 3 · see citing works

EFFECT OF NUCLEATING AGENTS ON PHYSICAL-MECHANICAL PROPERTIES

(2016) · Elsevier eBooks · doi:10.1016/b978-1-895198-93-5.50014-9 · Cited by 3 · see citing works

An application of pressure-induced flow with no constraint direction on improvement of mechanical properties for isotactic polypropylene/propylene-ethylene copolymer blends

Hua, C., Wang, W., Li, N., Luo, J., Wang, X., & Wang, Z. (2025) · Polymer · doi:10.1016/j.polymer.2025.128663 · Cited by 2 · see citing works

Simultaneously Toughening and Strengthening of PLA-b-PCL Copolymer via Pressure-induced-flow Processing at Room Temperature

Zhu, S., Zhang, K., Hu, Y., Xiong, M., Zhang, S., Jiao, M., & Yu, M. (2018) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/436/1/012006 · Cited by 1 · see citing works

On-demand regulatable mechanical properties of highly transparent biodegradable polymer by dynamic compression training

Yuan, C.-H., Li, L., Wu, W., Rao, W.-X., Huang, G., Zheng, J.-C., Shi, C., Huang, Z.-X., & Qu, J.-P. (2025) · Polymer · doi:10.1016/j.polymer.2025.128967 · Cited by 1 · see citing works

Depth-dependent structural analysis of polyolefin multilayer films using microbeam X-ray diffraction

Kim, J., Lee, S., Park, M. S., Kim, Y. J., Cho, N., Ahn, H., & Ryu, D. Y. (2025) · Polymer Testing · doi:10.1016/j.polymertesting.2025.108928 · Cited by 1 · see citing works

Enhanced Mechanical and Wear Performance of Carbon Fiber‐Reinforced PA6 Composites Fabricated by Screw Extrusion Additive Manufacturing

Cheng, K., Dong, W., Wu, W., Wang, B., Liu, J., Hu, Z., & Li, X. (2026) · Polymer Composites · doi:10.1002/pc.71044 · Cited by 1 · see citing works

EFFECT OF NUCLEATING AGENTS ON PHYSICAL-MECHANICAL PROPERTIES

Wypych, G. (2026) · Elsevier eBooks · doi:10.1016/b978-1-77467-084-2.50015-3 · Cited by 1 · see citing works

High Impact Toughness ABS/CaCO3 Nanocomposites Prepared through Pressure Induced Flow Moulding

Zhang, J., Zhao, J. L., Li, K., Zhang, S., & Ma, Y. (2015) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.799-800.175 · Cited by 1 · see citing works

Effect of Friction Stir Welding Process on Crystallinity and Degradation of Polypropylene

Kusharjanta, B., Soenoko, R., Purnowidodo, A., & Irawan, Y. S. (2020) · Journal of Southwest Jiaotong University · doi:10.35741/issn.0258-2724.55.2.62 · Cited by 1 · see citing works

Polymer Modification with Multifunctional Additives and Unique Processing Methods

Ware, P. R. (2020) · ScholarWorks@UMassAmherst (University of Massachusetts Amherst) · doi:10.7275/5639518.0

Uniaxial tensile‐induced deformation of spherulite: combining experimental and simulation methods

Yuan, M., Ren, L., Zhao, N. R., Liu, Y., & Li, Q. (2024) · Polymer International · doi:10.1002/pi.6672

AC Electrical Treeing and Dielectric Breakdown

Du, B., & Li, Z. (2024) · doi:10.1002/9781394234462.ch6

Enhanced mechanical and wear performance of carbon fiber reinforced PA6 composites fabricated by screw-extrusion additive manufacturingPreprint

Cheng, K., Dong, W., Wu, W. H., Wang, B., Liu, J., Hu, Z., & Li, X. B. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5971708

Chemical modifications of polyamide by reactive extrusion

Auclerc, M. (2018) · doi:10.70675/d102c967z0f5dz4fc2z9370za4f7a15aaf29

Preparation of High‐Strength and Super‐Toughness Polypropylene Without Internal Stress via Combining Pressure‐Induced Flow Processing and Low‐Temperature Supercritical CO 2 Saturation

Yu, P., Jia, L., Liu, Z., Jin, Z., Zhao, Y., Hu, J., Xiong, S., Deng, W., & Huang, Y. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70558

A comparative study of the mechanical and tribological properties of UHMWPE composites with synthetic and natural wollastonite

Danilova, S. N., Yarusova, S. B., Tarasova, P. N., Капітонова, Ю. В., Ivanova, L. N., Gordienko, P. S., Papynov, E. K., Okhlopkova, A. A., Zhang, Z.-F., & Liu, B.-F. (2026) · Journal of Composite Materials · doi:10.1177/00219983261469283

From acicular to Spherulite: crystallization optimization guided by machine learning for enhanced energetic material properties

Luo, X., Zhou, X., Zhang, Q., Li, S., & Jiao, F. (2026) · Chemical Engineering Science · doi:10.1016/j.ces.2026.124959

Compatibilizer-free miscible PHB/P3HB4HB blends with tunable crystallization and enhanced melt processability for extrusion and 3D printing

Nguyen, P. K., Shorey, R., & Mekonnen, T. H. (2026) · Materials Advances · doi:10.1039/d6ma00687f

An application of pressure-induced flow with no constraint direction on improvement of mechanical properties for isotactic polypropylene/propylene-ethylene copolymer blends

Hua, C., Wang, W., Li, N., Luo, J., Wang, X., & Wang, Z. (2025) · Polymer · doi:10.1016/j.polymer.2025.128663 · Cited by 2 · see citing works

Flow and Pressure Jointly Induced Ultrahigh Melting Temperature Spherulites with Oriented Thick Lamellae in Isotactic Polypropylene

Yang, S.-G., Zhang, Z., Zhou, D., Wang, Y., Lei, J., Li, L., & Li, Z. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b01043 · Cited by 51 · see citing works

The mechanism for fracture resistance in β‐nucleated isotactic polypropylene

Xu, L., Xu, K., Zhang, X., Liu, F., & Chen, M. (2009) · Polymers for Advanced Technologies · doi:10.1002/pat.1506 · Cited by 17 · see citing works

The Effect of Pressure-Induced Flow Processing on the Tensile Properties and Crystal Structure of Polypropylene

Jiao, M. L., Yang, K., & Zhang, W. X. (2011) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.117-119.1177

Novel Method to Toughen Polypropylene by Uniaxial Compression Processing

Jiao, M. L., Yang, K., & Chen, Y. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.239-242.3249 · Cited by 2 · see citing works