CoChat

Membrane formation via non-solvent induced phase separation using sustainable solvents: A comparative study

Kahrs, Catharina, Schwellenbach, Jan · 2020 · Polymer
Cited by 159

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

Abstract Non-solvent induced phase separation (NIPS) is a frequently used technique for the production of polymeric membranes. It enables the production of membranes with a broad range of different characteristics. Current solvents used in membrane preparation are often toxic, environmentally unfriendly and prepared from non-sustainable resources. This is why a replacement of solvents like N-methyl-2-pyrrolidone (NMP) and dimethylacetamide (DMAc) is highly desirable. In order to substitute a solvent whilst achieving the same desired membrane properties, it is necessary to understand the formation mechanisms and its influencing factors. One important set of parameters for controlling the membrane features is the polymer solution composition. This is why the aim of this study was to improve the understanding of membrane formation by gaining a holistic picture of the influences of systematic additive variations, focusing on the comparison between conventional and alternative sustainable solvent systems. Thus, 72 different polyethersulfone (PES) membrane prototypes were produced by immersion precipitation from polymer solutions prepared in NMP and DMAc, as well as in the sustainable alternatives 2-pyrrolidone (2P) and dimethyllactamide (DML). In all four solvent systems varying concentrations and molecular weights of the polymeric additives polyvinylpyrrolidone (PVP) and polyethylene glycol (PEG) were applied. The viscosity of the polymer solutions was determined, and thereof formed membranes were analyzed in terms of permeability, protein retention, surface properties, mechanical stability and morphology. The results indicate that both, solvents and additives, significantly impact the membrane properties. It was shown that the influences of the additives on all investigated membrane features were strongly dependent on the applied solvent. The observed effects were similar for the conventional solvents NMP and DMAc, but differed from those found for the alternative solvents 2P and DML, which among themselves also showed comparable outcomes. In conclusion, this study proves that it is possible to obtain desired membrane properties with 2P or DML as long as the solution composition is chosen appropriately.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.polymer.2019.122071

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 159

Metadata

Authors
Kahrs, C., & Schwellenbach, J.
Venue
Polymer
Publisher
Elsevier BV
Published
2020-01
Volume
186
Pages
122071
ISSN
0032-3861 (ISSN-L)
OpenAlex
W2994409796
Cited by
159
References
2
FWCI
2.91
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.