The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Highly transparent and antimicrobial PVA based bionanocomposites reinforced by ginger nanofiber
Open accessAbstract
Abstract Good transparency, antimicrobial, physical, and tensile properties of the biodegradable film can be necessary for food packaging. The aim of this study is to characterize these properties of the poly(vinyl alcohol) (PVA)/ginger nanofiber (GF) bionanocomposite film. This nanofiber of 0.21, 0.31 and 0.41 g in suspensions, was mixed with PVA gel using ultrasonication. After addition of ginger nanofibers, the bionanocomposite film shows antibacterial activity but does not have antifungi activity. Increasing the nanofiber into PVA increases significantly in tensile properties, water vapour impermeability, and moisture resistance. Tensile strength, the temperature at maximum film decomposition, and moisture resistance (after 8 h) of the 0.41 g ginger nanofiber reinforced film were 44.2 MPa (increased by 65.6%), 349.4 °C (increased by 7%), and 6.1% (decreased by 18.7%), respectively compared to pure PVA. With this nanofiber loading, the transparency of the bionanocomposite film decreased slightly. These results suggest this bionanocomposite film has potential in food packaging in industrial applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bacterial cellulose nanocrystals exhibiting high thermal stability and their polymer nanocomposites
George, J., Ramana, K. V., Bawa, A. S., & Siddaramaiah (2011) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2010.09.013 · Cited by 319
Cited by
Tarique, J., Sapuan, S. M., & Khalina, A. (2021) · Scientific Reports · doi:10.1038/s41598-021-93094-y · Cited by 522
Self-citationPolylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications
Ilyas, R. A., Sapuan, S. M., Harussani, M. M., Hakimi, M. Y. A. Y., Haziq, M. Z. M., Atikah, M. S. N., Asyraf, M. R. M., Ishak, M. R., Razman, M. R., Nurazzi, N. M., et al. (2021) · Polymers · doi:10.3390/polym13081326 · Cited by 513
Self-citationMicro- and Nanocellulose in Polymer Composite Materials: A Review
Omran, A. A. B., Mohammed, A. A. B. A., Sapuan, S. M., Ilyas, R. A., Asyraf, M. R. M., Rahimian Koloor, S. S., & Petrů, M. (2021) · Polymers · doi:10.3390/polym13020231 · Cited by 398
Self-citationNazrin, A., Sapuan, S. M., Zuhri, M. Y. M., Ilyas, R. A., Syafiq, R., & Sherwani, S. F. K. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00213 · Cited by 294
Self-citationAlsubari, S., Zuhri, M. Y. M., Sapuan, S. M., Ishak, M. R., Ilyas, R. A., & Asyraf, M. R. M. (2021) · Polymers · doi:10.3390/polym13030423 · Cited by 290
Self-citation
Metadata
- Authors
- Abral, H., Ariksa, J., Mahardika, M., Handayani, D., Aminah, I., Sandrawati, N., Sapuan, S. M., & Ilyas, R. A.
- Venue
- Polymer Testing
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 81
- Pages
- 106186
- ISSN
- 0142-9418 (ISSN-L)
- OpenAlex
- W2981962722
- Cited by
- 160
- References
- 1
- FWCI
- 6.26
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Highly transparent and antimicrobial PVA based bionanocomposites reinforced by ginger nanofiber. https://app.cochat.ai/papers/10.1016/j.polymertesting.2019.106186
- The paper
- Abral, H., Ariksa, J., Mahardika, M., Handayani, D., Aminah, I., Sandrawati, N., Sapuan, S. M., & Ilyas, R. A. (2020). Highly transparent and antimicrobial PVA based bionanocomposites reinforced by ginger nanofiber. Polymer Testing. https://doi.org/10.1016/j.polymertesting.2019.106186
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.