The DOI matches its Crossref record; 134 of the 134 references it cites were found in a registry or an index.
Surface treatment to improve water repellence and compatibility of natural fiber with polymer matrix: Recent advancement
Open accessAbstract
The world is in need of more eco-friendly material, therefore numerous efforts have been made to replace synthetic fibers in fiber-reinforced composites with natural fibers reinforced composite (NFRC), owing to growing environmental consciousness and the depletion of oil supplies. The low cost, low density, abundance, and biodegradability of NFRC, have encouraged several researchers worldwide to study their potential applications in a number of industrial sectors. However, NFRC have several disadvantages, including excessive moisture absorption and subsequent swelling and degradation, low chemical and fire resistance, significant mechanical characteristics dispersion, insufficient interfacial interactions with polymeric or cementitious matrices, etc. Consequently, there is great interest in modifying the surface of NFRC using a variety of methods. This review presents an overview of the NFRC, its characterization, the problems associated with adding NFRC to polymer matrix. The main motive of this article is to review existing research on the surface treatments of NFRC, namely alkali, silane, acetylation, benzoylation, etc., which are all used to reduce moisture absorption and fibers deterioration in order to tackle their obvious disadvantages and effectively employ in a variety of application areas. The effect of these surface treatments on the hydrophilicity, surface chemistry, interface bonding, mechanical characteristics, and thermal performance of NFRC has also been addressed. In addition, we conducted a comprehensive evaluation of the surface treatment of NFRC using nanoparticles (NPs) to increase the hydrophobicity and interfacial bonding between the NFRC and polymer matrix, which might improve the strength and dimensional stability of NFRC. As a result, this review article may make a valuable contribution for researchers interested in coating and treating NFRC to further enhance their surface characteristics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Journal of Physics: Conference Series
(2013) · Journal of Physics Conference Series · doi:10.1088/issn.1742-6596 · Cited by 15,679
IOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,921
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Silane coupling agents used for natural fiber/polymer composites: A review
Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.005 · Cited by 2,244
Raghupathi, K. R., Koodali, R. T., & Manna, A. C. (2011) · Langmuir · doi:10.1021/la104825u · Cited by 2,037
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851
Tokiwa, Y., Calabia, B. P., Ugwu, C. U., & Aiba, S. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10093722 · Cited by 1,782
Antibacterial activity of ZnO nanoparticle suspensions on a broad spectrum of microorganisms
Jones, N., Ray, B., Ranjit, K. T., & Manna, A. C. (2008) · FEMS Microbiology Letters · doi:10.1111/j.1574-6968.2007.01012.x · Cited by 1,712
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Rajak, D., Pagar, D., Menezes, P., & Linul, E. (2019) · Polymers · doi:10.3390/polym11101667 · Cited by 1,706
Characterization and properties of natural fiber polymer composites: A comprehensive review
Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.101 · Cited by 1,652
DHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
Jawaid, M., & Abdul Khalil, H. P. S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.043 · Cited by 1,567
A review on the degradability of polymeric composites based on natural fibres
Azwa, Z. N., Yousif, B. F., Manalo, A. C., & Karunasena, W. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.11.025 · Cited by 1,530
Critical review of recent publications on use of natural composites in infrastructure
Dittenber, D. B., & GangaRao, H. V. S. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.11.019 · Cited by 1,515
Kalia, S., Kaith, B. S., & Kaur, I. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21328 · Cited by 1,447
Biodegradable composites based on lignocellulosic fibers—An overview
Satyanarayana, K. G., Arizaga, G. G. C., & Wypych, F. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.002 · Cited by 1,421
Nanocomposites: synthesis, structure, properties and new application opportunities
Camargo, P. H. C., Satyanarayana, K. G., & Wypych, F. (2009) · Materials Research · doi:10.1590/s1516-14392009000100002 · Cited by 1,350
Rasmussen, J. W., Martinez, E., Louka, P., & Wingett, D. G. (2010) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2010.502560 · Cited by 1,330
Hollaway, L. C. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.04.062 · Cited by 1,297
Nanocomposites for food packaging applications
Azeredo, H. M. C. D. (2009) · Food Research International · doi:10.1016/j.foodres.2009.03.019 · Cited by 1,259
Surface modifications of natural fibers and performance of the resulting biocomposites: An overview
Mohanty, A. K., Misra, M., & Drzal, L. T. (2001) · Composite Interfaces · doi:10.1163/156855401753255422 · Cited by 1,072
Rong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047
M.R., S., Siengchin, S., Parameswaranpillai, J., Jawaid, M., Pruncu, C. I., & Khan, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.083 · Cited by 999
Progress Report on Natural Fiber Reinforced Composites: Progress Report on Natural Fiber Composites
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300008 · Cited by 997
Biofibers from agricultural byproducts for industrial applications
Reddy, N., & Yang, Y. (2005) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.11.002 · Cited by 977
Properties and modification methods for vegetable fibers for natural fiber composites
Bledzki, A. K., Reihmane, S., & Gassan, J. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960222)59:8<1329::aid-app17>3.0.co;2-0 · Cited by 906
Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites
Mishra, S., Mohanty, A. K., Drzal, L. T., Misra, M., Parija, S., Nayak, S. K., & Tripathy, S. S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00084-8 · Cited by 873
Valadez-Gonzalez, A., Cervantes-Uc, J. M., Olayo, R., & Herrera-Franco, P. J. (1999) · Composites Part B: Engineering · doi:10.1016/s1359-8368(98)00054-7 · Cited by 829
Vinod, A., Sanjay, M. R., Suchart, S., & Jyotishkumar, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120978 · Cited by 828
Isolation and characterization of cellulose from sugarcane bagasse
Sun, J. X., Sun, X. F., Zhao, H., & Sun, R. C. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.02.008 · Cited by 784
A Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid Composites
Saba, N., Tahir, P., & Jawaid, M. (2014) · Polymers · doi:10.3390/polym6082247 · Cited by 739
A review of bast fibres and their composites. Part 1 – Fibres as reinforcements
Summerscales, J., Dissanayake, N. P. J., Virk, A. S., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.06.001 · Cited by 683
Klyosov, A. A. (2007) · doi:10.1002/9780470165935 · Cited by 673
Cellulose Fibers: Bio- and Nano-Polymer Composites: Green Chemistry and Technology
(2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7 · Cited by 626
Mascolo, M., Pei, Y., & Ring, T. (2013) · Materials · doi:10.3390/ma6125549 · Cited by 620
Maleated coupling agents for natural fibre composites
Keener, T. J., Stuart, R. K., & Brown, T. K. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.014 · Cited by 590
Paper and Composites from Agro-Based Resources
Rowell, R. M., Young, R. A., & Rowell, J. K. (1996) · Medical Entomology and Zoology · Cited by 571
Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites
MOHANTY, S., VERMA, S., & NAYAK, S. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.06.014 · Cited by 561
The thermal and crystallisation studies of short sisal fibre reinforced polypropylene composites
Joseph, P. V., Joseph, K., Thomas, S., Pillai, C. K. S., Prasad, V. S., Groeninckx, G., & Sarkissova, M. (2003) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00185-9 · Cited by 530
Joseph, P. V., Rabello, M. S., Mattoso, L. H. C., Joseph, K., & Thomas, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00080-5 · Cited by 515
Sreekala, M. S., Kumaran, M. G., Joseph, S., Jacob, M., & Thomas, S. (2000) · Applied Composite Materials · doi:10.1023/a:1026534006291 · Cited by 489
The effects of acetylation on properties of flax fibre and its polypropylene composites
Bledzki, A. K., Mamun, A. A., Lucka-Gabor, M., & Gutowski, V. S. (2008) · Express Polymer Letters · doi:10.3144/expresspolymlett.2008.50 · Cited by 476
Effect of alkali treated jute fibres on composite properties
Ray, D., Sarkar, B. K., Rana, A. K., & Bose, N. R. (2001) · Bulletin of Materials Science · doi:10.1007/bf02710089 · Cited by 467
Gassan, J., & Bledzki, A. K. (1997) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(97)00042-0 · Cited by 444
Recent Advances in the Application of Natural Fiber Based Composites
Pandey, J. K., Ahn, S. H., Lee, C. S., Mohanty, A. K., & Misra, M. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000095 · Cited by 436
Crini, G., Lichtfouse, E., Chanet, G., & Morin-Crini, N. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01029-2 · Cited by 396
Effect of fibre surface modification on water-sorption characteristics of oil palm fibres
Sreekala, M. S., & Thomas, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00270-1 · Cited by 381
Xue, C.-H., Chen, J., Yin, W., Jia, S.-T., & Ma, J.-Z. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2011.10.074 · Cited by 376
Water absorption and enzymatic degradation of poly(lactic acid)/rice starch composites
Yew, G. H., Mohd Yusof, A. M., Mohd Ishak, Z. A., & Ishiaku, U. S. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.04.006 · Cited by 374
Zafeiropoulos, N. E., Williams, D. R., Baillie, C. A., & Matthews, F. L. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00082-9 · Cited by 359
Effects of corona discharge and UV treatment on the properties of jute-fibre epoxy composites
Gassan, J. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00168-8 · Cited by 355
Hemath, M., Mavinkere Rangappa, S., Kushvaha, V., Dhakal, H. N., & Siengchin, S. (2020) · Polymer Composites · doi:10.1002/pc.25703 · Cited by 335
A REVIEW ON SISAL FIBER REINFORCED POLYMER COMPOSITES
Joseph, K., Tolêdo Filho, R. D., James, B., Thomas, S., & Carvalho, L. H. D. (1999) · Revista Brasileira de Engenharia Agrícola e Ambiental · doi:10.1590/1807-1929/agriambi.v3n3p367-379 · Cited by 330
Nanofiller‐reinforced polymer nanocomposites
Njuguna, J., Pielichowski, K., & Desai, S. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1074 · Cited by 327
Flammability and fire resistance of composites reinforced by natural fibers
Kozłowski, R., & Władyka‐Przybylak, M. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1135 · Cited by 323
Biotechnology in the pulp and paper industry
Eriksson, K.-E. L. (1990) · Wood Science and Technology · doi:10.1007/bf00225309 · Cited by 321
Madhu, P., Rangappa, S. M., Jawaid, M., Siengchin, S., Khan, A., & Pruncu, C. I. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106437 · Cited by 317
Flax fibre–polyester composites
Baiardo, M., Zini, E., & Scandola, M. (2004) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.02.004 · Cited by 313
Polymer nanocomposites: A small part of the story
Schadler, L. S., Brinson, L. C., & Sawyer, W. G. (2007) · JOM · doi:10.1007/s11837-007-0040-5 · Cited by 298
A study of the potential of acetylation to improve the properties of plant fibres
Hill, C. A. S., Khalil, H. P. S. A., & Hale, M. D. C. (1998) · Industrial Crops and Products · doi:10.1016/s0926-6690(97)10012-7 · Cited by 293
Maldas, D., Kokta, B. V., & Daneault, C. (1989) · Journal of Applied Polymer Science · doi:10.1002/app.1989.070370313 · Cited by 286
Physical Modification of Natural Fibers and Thermoplastic Films for Composites — A Review
Mukhopadhyay, S., & Fangueiro, R. (2009) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705708091860 · Cited by 286
Agrawal, R., Saxena, N. S., Sharma, K. B., Thomas, S., & Sreekala, M. S. (2000) · Materials Science and Engineering A · doi:10.1016/s0921-5093(99)00556-0 · Cited by 285
Influence of moisture absorption on the interfacial strength of bamboo/vinyl ester composites
Chen, H., Miao, M., & Ding, X. B. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.09.003 · Cited by 282
Functional Finishing of Cotton Fabrics Using Silver Nanoparticles
Vigneshwaran, N., Kathe, A. A., Varadarajan, P. V., Nachane, R. P., & Balasubramanya, R. H. (2007) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2007.737 · Cited by 280
Beg, M. D. H., & Pickering, K. L. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.06.012 · Cited by 270
Tensile Testing of Cellulose Based Natural Fibers for Structural Composite Applications
Symington, M. C., Banks, W. M., West, O. D., et al. (2009) · Journal of Composite Materials · doi:10.1177/0021998308097740 · Cited by 264
Cirtiu, C. M., Dunlop-Brière, A. F., & Moores, A. (2011) · Green Chem. · doi:10.1039/c0gc00326c · Cited by 255
Preparation of zinc oxide ceramics with a sustainable antibacterial activity under dark conditions
Hirota, K., Sugimoto, M., Kato, M., Tsukagoshi, K., Tanigawa, T., & Sugimoto, H. (2010) · Ceramics International · doi:10.1016/j.ceramint.2009.09.026 · Cited by 254
Wood plastic composites weathering: Visual appearance and chemical changes
Fabiyi, J. S., McDonald, A. G., Wolcott, M. P., & Griffiths, P. R. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.05.024 · Cited by 254
Potential Natural Fiber Polymeric Nanobiocomposites: A Review
Hasan, K. M. F., Horváth, P. G., & Alpár, T. (2020) · Polymers · doi:10.3390/polym12051072 · Cited by 244
Wood modification with alkoxysilanes
Donath, S., Militz, H., & Mai, C. (2004) · Wood Science and Technology · doi:10.1007/s00226-004-0257-1 · Cited by 237
Water sorption in oil palm fiber reinforced phenol formaldehyde composites
Sreekala, M. S., Kumaran, M. G., & Thomas, S. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00032-5 · Cited by 231
Composites of poly(L‐lactide) with hemp fibers: Morphology and thermal and mechanical properties
Masirek, R., Kulinski, Z., Chionna, D., Piorkowska, E., & Pracella, M. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26090 · Cited by 218
Water barrier properties of nanoclay filled sisal fibre reinforced epoxy composites
Mohan, T. P., & Kanny, K. M. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.12.010 · Cited by 217
Surface chemical modification of natural cellulose fibers
Baiardo, M., Frisoni, G., Scandola, M., & Licciardello, A. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.2229 · Cited by 217
Mai, C., & Militz, H. (2004) · Wood Science and Technology · doi:10.1007/s00226-003-0205-5 · Cited by 204
Influence of Moisture Absorption on Mechanical Properties of Wood Flour-Polypropylene Composites
Stark, N. (2001) · Journal of Thermoplastic Composite Materials · doi:10.1106/udky-0403-626e-1h4p · Cited by 203
Akhtar, M. N., Sulong, A. B., Radzi, M. K. F. M., Ismail, N. N., Raza, M. R., Muhamad, N., & Khan, M. A. (2016) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2016.12.004 · Cited by 200
Evaluation of interfacial relaxation due to water absorption in fiber–polymer composites
Tsenoglou, C. J., Pavlidou, S., & Papaspyrides, C. D. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.02.022 · Cited by 199
Influence of fiber surface treatment on the properties of sisal‐polyester composites
Singh, B., Gupta, M., & Verma, A. (1996) · Polymer Composites · doi:10.1002/pc.10684 · Cited by 190
Beg, M. D. H., & Pickering, K. L. (2008) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.08.003 · Cited by 187
Marais, S., Gouanvé, F., Bonnesoeur, A., et al. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.11.008 · Cited by 184
Functionalising wood by nanosol application
Mahltig, B., Swaboda, C., Roessler, A., & Böttcher, H. (2008) · Journal of Materials Chemistry · doi:10.1039/b718903f · Cited by 184
Plant Fibers as Reinforcement for Green Composites
Bismarck, A., Mishra, S., & Lampke, T. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch2 · Cited by 184
Biofiber Reinforcements in Composite Materials
(2015) · Elsevier eBooks · doi:10.1016/c2013-0-16470-7 · Cited by 176
Mohanty, A. K., Drzal, L. T., & Misra, M. (2002) · Journal of Adhesion Science and Technology · doi:10.1163/156856102760146129 · Cited by 175
Effect of water absorption fatigue on mechanical properties of sisal textile-reinforced composites
KIM, H., & Seo, D. (2006) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2006.02.018 · Cited by 173
Melt rheological behaviour of short pineapple fibre reinforced low density polyethylene composites
George, J., Janardhan, R., Anand, J. S., Bhagawan, S. S., & Thomas, S. (1996) · Polymer · doi:10.1016/s0032-3861(96)00386-2 · Cited by 168
Ultraviolet weathering of HDPE/wood-flour composites coextruded with a clear HDPE cap layer
Matuana, L. M., Jin, S., & Stark, N. M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.10.003 · Cited by 166
Developments in fiber-reinforced polymer (FRP) composites for civil engineering
Uddin, N. (2013) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857098955 · Cited by 162
Liu, W., Mohanty, A. K., Askeland, P. A., Drzal, L. T., & Misra, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.009 · Cited by 157
Hygrothermal ageing behaviour of a glass/epoxy composite used in wind turbine blades
Rocha, I. B. C. M., Raijmaekers, S., Nijssen, R. P. L., van der Meer, F. P., & Sluys, L. J. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.04.028 · Cited by 153
Do the unique properties of nanometals affect leachability or efficacy against fungi and termites?
Kartal, S. N., Green, F., & Clausen, C. A. (2009) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2009.01.007 · Cited by 148
The influence of chemical surface modification on the performance of sisal‐polyester biocomposites
Misra, S., Misra, M., Tripathy, S. S., NAYAK, S. K., & Mohanty, A. K. (2002) · Polymer Composites · doi:10.1002/pc.10422 · Cited by 138
Fiber-reinforced cellulosic thermoplastic composites
Glasser, W. G., Taib, R. M., Jain, R. K., & Kander, R. (1999) · Journal of Applied Polymer Science · Cited by 138
Sumrith, N., Techawinyutham, L., Rangappa, S. M., Dangtungee, R., & Siengchin, S. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01810-y · Cited by 135
Álvarez, V. A., Fraga, A. N., & Vázquez, A. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.13561 · Cited by 123
Stark, N. M. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23035 · Cited by 122
Tserki, V., Matzinos, P., & Panayiotou, C. G. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.09.004 · Cited by 119
Khalil, H. P. S. A., & Ismail, H. (2000) · Polymer Testing · doi:10.1016/s0142-9418(99)00080-x · Cited by 116
Prasad, N., Agarwal, V. K., & Sinha, S. (2016) · Iranian Polymer Journal · doi:10.1007/s13726-016-0416-x · Cited by 113
Weatherability and Leach Resistance of Wood Impregnated with Nano-Zinc Oxide
Clausen, C. A., Green, F., & Kartal, S. N. (2010) · Nanoscale Research Letters · doi:10.1007/s11671-010-9662-6 · Cited by 109
Interfacial Modification of Hemp Fiber Reinforced Composites Using Fungal and Alkali Treatment
Pickering, K. L., Li, Y., Farrell, R. L., & Lay, M. (2007) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2007.1984 · Cited by 100
Johnson, L. R., Thielemans, W., & Walsh, D. A. (2011) · Green Chemistry · doi:10.1039/c0gc00881h · Cited by 98
Shen, X., Wang, Q., Chen, W., & Pang, Y. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.09.033 · Cited by 95
Evaluation of reaction factors for deposition of silica (SiO2) nanoparticles on cellulose fibers
Raabe, J., Fonseca, A. D. S., Bufalino, L., Ribeiro, C., Martins, M. A., Marconcini, J. M., & Tonoli, G. H. D. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.08.042 · Cited by 87
Han, Y., Han, S. O., Cho, D., et al. (2007) · Composite Interfaces · doi:10.1163/156855407781291272 · Cited by 85
Qasim, U., Ali, Z., Nazir, M. S., Hassan, S. U., Rafiq, S., Jamil, F., Al-Muhtaseb, A. H., Ali, M., Niazi, M. B. K., Ahmad, N. M., et al. (2020) · Advances in Polymer Technology · doi:10.1155/2020/9765950 · Cited by 84
(The 8th International Conference on Composite Materials)
Somiya, S., Ben, G., Takeda, N., Hamada, H., Hirai, H., & Ishikawa, T. (1991) · Journal of the Japan Society for Composite Materials · doi:10.6089/jscm.17.249 · Cited by 81
Ameer, M. H., Shaker, K., Ashraf, M., Karahan, M., Nawab, Y., Ahmad, S., & Nasir, M. A. (2017) · Journal of the Textile Institute · doi:10.1080/00405000.2017.1285201 · Cited by 66
Influence of UV Radiation on the Physical-chemical and Mechanical Properties of Banana Fiber
Benedetto, R. M. D., Gelfuso, M. V., & Thomazini, D. (2015) · Materials Research · doi:10.1590/1516-1439.371414 · Cited by 57
Mukhortova, Y. R., Pryadko, A. S., Chernozem, R. V., Pariy, I. O., Akoulina, E. A., Demianova, I. V., Zharkova, I. I., Ivanov, Y. F., Wagner, D. V., Bonartsev, A. P., et al. (2022) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2022.100843 · Cited by 56
Dhar, P., Kumar, A., & Katiyar, V. (2015) · Cellulose · doi:10.1007/s10570-015-0759-z · Cited by 52
Suwan, T., Maichin, P., Fan, M., Jitsangiam, P., Tangchirapat, W., & Chindaprasirt, P. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125817 · Cited by 51
Wang, X., Liu, J., & Chai, Y. (2012) · BioResources · doi:10.15376/biores.7.1.893-901 · Cited by 49
Kenaf ( Hibiscus cannabinus L .) Seed and its Potential Food Applications: A Review
Ibrahim, S., Karim, R., Saari, N., Abdullah, W. Z. W., Zawawi, N., Razak, A. F. A., Hamim, N. A., & Umar, R. A. (2019) · Journal of Food Science · doi:10.1111/1750-3841.14714 · Cited by 48
Water Repellent Effect and Dimension Stability of Beech Wood Impregnated with Nano-Zinc Oxide
Soltani, M., Najafi, A., Yousefian, S., et al. (2013) · BioResources · doi:10.15376/biores.8.4.6280-6287 · Cited by 46
Surface Modification of Natural Fibers for Reinforcement in Polymeric Composites
Lu, N., Oza, S., & Tajabadi, M. G. (2015) · Wiley eBooks · doi:10.1002/9781119044901.ch9 · Cited by 42
Hybrid composites based on sisal fibers and silica nanoparticles
Vieira, L. M. G., dos Santos, J. C., Panzera, T. H., Christoforo, A. L., Mano, V., Rúbio, J. C. C., & Scarpa, F. L. (2016) · Polymer Composites · doi:10.1002/pc.23915 · Cited by 41
Banana Nutrition - Function and Processing Kinetics
Jideani, A. I. O., & Anyasi, T. A. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.76736 · Cited by 40
Oliveira, P. E., Petit-Breuilh, X., Díaz, P. E., & Gacitúa, W. (2020) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2020.100525 · Cited by 37
Tshabalala, M. A., Libert, R., & Schaller, C. M. (2010) · Holzforschung · doi:10.1515/hf.2011.022 · Cited by 36
Trăistaru, A. A. T., Sandu, I. C. A., Sandu, I. C. A., Timar, M. C., Dumitrescu, G. L., Sandu, I., & Sandu, I. (2012) · Microscopy Research and Technique · doi:10.1002/jemt.22155 · Cited by 32
Pang, A. L., Ismail, H., & Bakar, A. A. (2015) · BioResources · doi:10.15376/biores.10.4.7302-7314 · Cited by 26
Effect of Impregnated Inorganic Nanoparticles on the Properties of the Kenaf Bast Fibers
Liang, K., Shi, S. Q., & Wang, G. (2014) · Fibers · doi:10.3390/fib2030242 · Cited by 26
Effect of Acetylation with Perchloric Acid as Catalyst in Sugarcane Bagasse Waste
Silva, N. G. S., Maia, T. F., & Mulinari, D. R. (2021) · Journal of Natural Fibers · doi:10.1080/15440478.2021.1875352 · Cited by 18
Li, Z., Wang, Y., Cheng, L., Guo, W., & Wu, G. (2016) · Journal of Wood Chemistry and Technology · doi:10.1080/02773813.2016.1235586 · Cited by 15
Musa, L., Rozyanty, A. R., & Zhafer, S. F. (2018) · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · doi:10.4028/www.scientific.net/ssp.280.353 · Cited by 14
Mohanty (2000) · doi:10.1002/(sici)1439-2054(20000301)276:1
Cited by
Rashid, A. B., Haque, M., Islam, S. M. M., & Uddin Labib, K. M. R. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e24692 · Cited by 361
Retracted
Metadata
- Authors
- Mohammed, M., Rahman, R., Mohammed, A. M., Adam, T., Betar, B. O., Osman, A. F., & Dahham, O. S.
- Venue
- Polymer Testing
- Publisher
- Elsevier BV
- Published
- 2022-11
- Volume
- 115
- Pages
- 107707
- ISSN
- 0142-9418 (ISSN-L)
- OpenAlex
- W4286256643
- Cited by
- 351
- References
- 134
- FWCI
- 19.79
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.