The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Surface roughness profile and its effect on coating adhesion and corrosion protection: A review
Abstract
Abstract Specifications for coating many forms of infrastructure and equipment include abrasive cleaning, then measurement of the surface profile and adhesion on the assumption that they are linked to long term prevention of corrosion undercutting the coating. Studies find no quantitative connection between adhesion and corrosion protection, but many believe in a link. Although corrosion is a molecular phenomenon that starts at the interface, adhesion values are measured by a device attached to the coating at some distance from the interface, so it is difficult to directly connect corrosion with adhesion. Understanding how adhesion and the spread of corrosion under the coating are influenced by surface roughness entails surface metrology, fracture mechanics, surface energy and viscoelasticity. The impact of surface roughness cannot be not determined by a simple, or single, statistical parameter for variation in substrate height variation. Conventional “pull-off” adhesion testing does not characterize coating-metal interactions that might prevent water and electrolyte causing corrosion, they must be determined otherwise. The additional surface area created by the abrasion increases the number of adhesive interactions and the local slope of the surface engages Mode II loading that increases the force that the interface can support. Both these surface attributes may also slow the spread of corrosion across the interface. In order to prevent the diffusion of water and electrolyte across the interface, a coating should form well at the interface, be tough and as hydrophobic as realistically possible.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Tvergaard, V., & Hutchinson, J. W. (1992) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(92)90020-3 · Cited by 1,713
Crack deflection processes—I. Theory
Faber, K. T., & Evans, A. G. (1983) · Acta Metallurgica · doi:10.1016/0001-6160(83)90046-9 · Cited by 1,444
Bico, J., Thiele, U., & Quéré, D. (2002) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(02)00061-4 · Cited by 1,390
Relation Between Surface Roughness and Specular Reflectance at Normal Incidence
Bennett, H. E., & Porteus, J. O. (1961) · Journal of the Optical Society of America · doi:10.1364/josa.51.000123 · Cited by 1,121
Fracture and adhesion of soft materials: a review
Creton, C., & Ciccotti, M. (2016) · Reports on Progress in Physics · doi:10.1088/0034-4885/79/4/046601 · Cited by 915
The adhesion and surface energy of elastic solids
Kendall, K. (1971) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/4/8/320 · Cited by 749
Baldan, A. (2004) · Journal of Materials Science · doi:10.1023/b:jmsc.0000007726.58758.e4 · Cited by 625
An overview of degradable and biodegradable polyolefins
Ammala, A., Bateman, S., Dean, K., Petinakis, E., Sangwan, P., Wong, S., Yuan, Q., Yu, L., Patrick, C., & Leong, K. H. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.12.002 · Cited by 595
Surface energy, surface topography and adhesion
Packham, D. E. (2003) · International Journal of Adhesion and Adhesives · doi:10.1016/s0143-7496(03)00068-x · Cited by 595
Cited by
Chen, H.-C., Chang, C.-H., & Chen, K.-H. (2024) · Applied Optics · doi:10.1364/ao.540615 · Cited by 8
Metadata
- Authors
- Croll, S. G.
- Venue
- Progress in Organic Coatings
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 148
- Pages
- 105847
- ISSN
- 0300-9440 (ISSN-L)
- OpenAlex
- W3042025254
- Cited by
- 288
- References
- 26
- FWCI
- 8.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Surface roughness profile and its effect on coating adhesion and corrosion protection: A review. https://app.cochat.ai/papers/10.1016/j.porgcoat.2020.105847
- The paper
- Croll, S. G. (2020). Surface roughness profile and its effect on coating adhesion and corrosion protection: A review. Progress in Organic Coatings. https://doi.org/10.1016/j.porgcoat.2020.105847
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.