The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
High adsorption of methylene blue by activated carbon prepared from phosphoric acid treated eucalyptus residue
Abstract
Abstract Activated carbon with large specific surface area (1545 m2·g−1) and total acid density (2.47 mmol·g−1) was prepared by thermal activation of phosphoric acid treated eucalyptus residue, and was successfully used for simulated dye wastewater treatment where it showed high methylene blue (MB) adsorption capacity (977 mg·g−1). The textural properties and acidic functional groups of the activated carbon could be adjusted and controlled by phosphoric acid/eucalyptus residue mass ratios and activation temperature. Moreover, acidic functional groups could enhance MB adsorption by converting the adsorption pattern from planar to side adsorption with a decrease in activation temperature. The adsorption process was well described by the pseudo-second order kinetics and the Langmuir isotherm model, and it was demonstrated that intra-particle diffusion involved multi-linear stages. These findings provide important insights for the efficient treatment of dye wastewater on an industrial scale using waste eucalyptus residue.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of pharmaceuticals and personal care products (PPCPs) from wastewater: A review
Wang, J., & Wang, S. (2016) · Journal of Environmental Management · doi:10.1016/j.jenvman.2016.07.049 · Cited by 1,430
Self-citationYahya, M. A., Al-Qodah, Z., & Ngah, C. W. Z. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.02.051 · Cited by 1,202
Biodiesel made with sugar catalyst
Toda, M., Takagaki, A., Okamura, M., Kondo, J. N., Hayashi, S., Domen, K., & Hara, M. (2005) · Nature · doi:10.1038/438178a · Cited by 823
Dye adsorption and decomposition on two-dimensional titanium carbide in aqueous media
Mashtalir, O., Cook, K. M., Mochalin, V. N., Crowe, M., Barsoum, M. W., & Gogotsi, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02638a · Cited by 806
Banerjee, S., & Chattopadhyaya, M. C. (2017) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2013.06.005 · Cited by 791
Saleh, T. A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.208 · Cited by 640
Adsorption of dyes on activated carbons: influence of surface chemical groups
Pereira, M. F. R., Soares, S. F., Órfão, J. J. M., & Figueiredo, J. L. (2003) · Carbon · doi:10.1016/s0008-6223(02)00406-2 · Cited by 604
Feasibility of industrial-scale treatment of dye wastewater via bio-adsorption technology
Li, W., Mu, B., & Yang, Y. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.01.002 · Cited by 574
Adsorption mechanisms of five bisphenol analogues on PVC microplastics
Wu, P., Cai, Z., Jin, H., & Tang, Y. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.09.049 · Cited by 559
Pelekani, C., & Snoeyink, V. L. (2000) · Carbon · doi:10.1016/s0008-6223(99)00261-4 · Cited by 471
Modified bentonite adsorption of organic pollutants of dye wastewater
Huang, Z., Li, Y., Chen, W., Shi, J., Zhang, N., Wang, X., Li, Z., Gao, L., & Zhang, Y. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.09.028 · Cited by 392
Nitrogen-doped porous carbon derived from biomass waste for high-performance supercapacitor
Ma, G., Yang, Q., Sun, K., Peng, H., Ran, F., Zhao, X., & Lei, Z. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.07.100 · Cited by 381
Dural, M. U., Cavas, L., Papageorgiou, S. K., & Katsaros, F. K. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.12.038 · Cited by 362
Gokce, Y., & Aktas, Z. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.05.214 · Cited by 340
Wang, J., Xu, W., Ren, J., Liu, X., Lu, G., & Wang, Y. (2011) · Green Chemistry · doi:10.1039/c1gc15306d · Cited by 320
Self-citationJi, L., Wan, Y., Zheng, S., & Zhu, D. (2011) · Environmental Science & Technology · doi:10.1021/es200483b · Cited by 316
Asuquo, E., Martin, A., Nzerem, P., Siperstein, F., & Fan, X. (2017) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2016.12.043 · Cited by 313
Köseoğlu, E., & Akmil-Başar, C. (2015) · Advanced Powder Technology · doi:10.1016/j.apt.2015.02.006 · Cited by 309
Methylene blue and iodine adsorption onto an activated desert plant
Bestani, B., Benderdouche, N., Benstaali, B., Belhakem, M., & Addou, A. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2008.02.053 · Cited by 307
Preparation and characterization of super activated carbon produced from gulfweed by KOH activation
Li, S., Han, K., Li, J., Li, M., & Lu, C. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.02.052 · Cited by 305
Spessato, L., Bedin, K. C., Cazetta, A. L., Souza, I. P. A. F., Duarte, V. A., Crespo, L. H. S., Silva, M. C., Pontes, R. M., & Almeida, V. C. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.02.102 · Cited by 283
Sustainable activated carbons from dead ginkgo leaves for supercapacitor electrode active materials
Zhu, X., Yu, S., Xu, K., Zhang, Y., Zhang, L., Lou, G., Wu, Y., Zhu, E., Chen, H., Shen, Z., et al. (2018) · Chemical Engineering Science · doi:10.1016/j.ces.2018.02.004 · Cited by 264
Pezoti, O., Cazetta, A. L., Souza, I. P. A. F., Bedin, K. C., Martins, A. C., Silva, T. L., & Almeida, V. C. (2014) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.02.007 · Cited by 261
Nahil, M. A., & Williams, P. T. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.12.019 · Cited by 246
AHMAD, A., LOH, M., & AZIZ, J. (2007) · Dyes and Pigments · doi:10.1016/j.dyepig.2006.05.034 · Cited by 243
Liang, Q., Luo, H., Geng, J., & Chen, J. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.145 · Cited by 238
Arulkumar, M., Sathishkumar, P., & Palvannan, T. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.11.067 · Cited by 229
Senthil Kumar, P., Varjani, S. J., & Suganya, S. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2017.11.097 · Cited by 199
Dobele, G., Rossinskaja, G., Telysheva, G., Meier, D., & Faix, O. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(98)00126-0 · Cited by 188
Activated carbons prepared by pyrolysis of mixtures of carbon precursor/alkaline hydroxide
Lillo-Ródenas, M. A., Marco-Lozar, J. P., Cazorla-Amorós, D., & Linares-Solano, A. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.01.014 · Cited by 175
Design of Melamine Sponge-Based Three-Dimensional Porous Materials toward Applications
Feng, Y., & Yao, J. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b01232 · Cited by 173
Chen, Y., Zhai, S.-R., Liu, N., Song, Y., An, Q.-D., & Song, X.-W. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.07.002 · Cited by 168
Yu, Y., Qiao, N., Wang, D., Zhu, Q., Fu, F., Cao, R., Wang, R., Liu, W., & Xu, B. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.121340 · Cited by 154
Adsorption of methylene blue in the determination of surface areas
Kipling, J. J., & Wilson, R. B. (1960) · Journal of Applied Chemistry · doi:10.1002/jctb.5010100303 · Cited by 151
Liu, X., He, C., Yu, X., Bai, Y., Ye, L., Wang, B., & Zhang, L. (2017) · Powder Technology · doi:10.1016/j.powtec.2017.12.034 · Cited by 149
Maiti, D., Mukhopadhyay, S., & Devi, P. S. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01684 · Cited by 142
Ahmed, M. J., & Theydan, S. K. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.11.005 · Cited by 137
Brito, M. J. P., Veloso, C. M., Santos, L. S., Bonomo, R. C. F., & Fontan, R. D. C. I. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.08.017 · Cited by 134
Luo, Y., Li, D., Chen, Y., Sun, X., Cao, Q., & Liu, X. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-03220-x · Cited by 131
Sewu, D. D., Boakye, P., Jung, H., & Woo, S. H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.08.103 · Cited by 118
Ding, B., Huang, S., Pang, K., Duan, Y., & Zhang, J. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02164 · Cited by 113
Xie, R., Qu, B., & Hu, K. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00026-x · Cited by 95
Isotherm, kinetic and thermodynamic characteristics of adsorption of paclitaxel onto Diaion HP-20
Shin, H. S., & Kim, J.-H. (2016) · Process Biochemistry · doi:10.1016/j.procbio.2016.03.013 · Cited by 95
Villota, E. M., Lei, H., Qian, M., Yang, Z., Villota, S. M. A., Zhang, Y., & Yadavalli, G. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03669 · Cited by 89
Bedin, K. C., Souza, I. P. A. F., Cazetta, A. L., Spessato, L., Ronix, A., & Almeida, V. C. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.08.020 · Cited by 89
Cazetta, A. L., Martins, A. C., Pezoti, O., Bedin, K. C., Beltrame, K. K., Asefa, T., & Almeida, V. C. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.04.124 · Cited by 84
Liu, M., Li, X., Du, Y., & Han, R. (2018) · Bioresource Technology Reports · doi:10.1016/j.biteb.2018.11.006 · Cited by 81
Pyrolysis of apple pulp: effect of operation conditions and chemical additives
Suárez‐García, F., Martínez-Alonso, A., & Tascón, J. M. D. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00216-3 · Cited by 79
Liu, G., Zheng, H., Zhai, X., & Wang, Z. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.156 · Cited by 79
Chen, C., Mi, S., Lao, D., Shi, P., Tong, Z., Li, Z., & Hu, H. (2019) · RSC Advances · doi:10.1039/c9ra03490k · Cited by 78
Yu, H., Zhang, T., Jing, Z., et al. (2019) · Chemical Engineering Science · doi:10.1016/j.ces.2019.05.012 · Cited by 67
Suárez‐García, F., Martínez-Alonso, A., & Tascón, J. M. D. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00243-9 · Cited by 63
Guo, Z., Zhang, J., & Liu, H. (2016) · RSC Advances · doi:10.1039/c5ra25200h · Cited by 49
Efficient treatment of rice byproducts for preparing high-performance activated carbons
Basta, A. H., Lotfy, V. F., Hasanin, M. S., Trens, P., & El‐Saied, H. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.216 · Cited by 49
Kaźmierczak-Raźna, J., Nowicki, P., Wisniewska, M. A., Nosal‐Wiercińska, A., & Pietrzak, R. (2017) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2017.09.015 · Cited by 45
Zhang, G., Shi, L., Zhang, Y., Wei, D., Yan, T., Wei, Q. L., & Du, B. (2015) · RSC Advances · doi:10.1039/c4ra15216f · Cited by 37
Wang, C., Chen, W., Yang, L., Wei, R., Ni, J., & Yang, Y. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.07.261 · Cited by 34
Cited by
Lobato-Peralta, D. R., Okoye, P. U., & Alegre, C. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235140 · Cited by 266
Yağmur, H. K., & Kaya, İ. (2021) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2021.130071 · Cited by 263
Bouchelkia, N., Tahraoui, H., Amrane, A., Belkacemi, H., Bollinger, J.-C., Bouzaza, A., Zoukel, A., Zhang, J., & Mouni, L. (2023) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.12.028 · Cited by 124
Metadata
- Authors
- Han, Q., Wang, J., Goodman, B. A., Xie, J., & Liu, Z.
- Venue
- Powder Technology
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 366
- Pages
- 239-248
- ISSN
- 0032-5910 (ISSN-L)
- OpenAlex
- W3006590843
- Cited by
- 258
- References
- 57
- FWCI
- 12.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.