The DOI matches its Crossref record.
Material jetting additive manufacturing: An experimental study using designed metrological benchmarks
Open accessAbstract
Additive manufacturing (AM) technique allows the creation of parts with a high degree of design complexity by building three-dimensional (3D) parts layer-by-layer. Many of the current restrictions of design for manufacturing (DFM) as well as design for assembly (DFA) are no longer applicable for AM due to the lack of needs for tooling. Instead, it is critical to establish the manufacturing limits and design guidelines to achieve optimal production outcomes. This can be achieved through manipulation of process parameters. The purpose of this paper is to establish a systematic methodology for investigating the process capability of material jetting AM techniques by using specially designed benchmark artifacts. In this study, three customized benchmarks were designed to characterize and establish the process capability of material jetting AM techniques. Each of the benchmarks was designed for different purposes. Using a benchmark, metrological studies were conducted to determine the effect of process parameters on the dimensional accuracy of fabricated part. The design limitations on special features such as thin walls and assembly-free parts fabricated using different build orientations were also evaluated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
Mostafaei, A., Elliott, A. M., Barnes, J. E., Li, F., Tan, W., Cramer, C. L., Nandwana, P., & Chmielus, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100707 · Cited by 1,093
Saleh, B., Jiang, J., Fathi, R., Al-hababi, T., Xu, Q., Wang, L., Song, D., & Ma, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108376 · Cited by 738
Multiscale Toughening Mechanisms in Biological Materials and Bioinspired Designs
Huang, W., Restrepo, D., Jung, J., Su, F. Y., Liu, Z., Ritchie, R. O., McKittrick, J., Zavattieri, P., & Kisailus, D. (2019) · Advanced Materials · doi:10.1002/adma.201901561 · Cited by 662
Additive manufacturing of functionally graded materials: A review
Zhang, C., Chen, F., Huang, Z., Jia, M., Chen, G., Ye, Y., Lin, Y., Liu, W., Chen, B., Shen, Q., et al. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.138209 · Cited by 612
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
Metadata
- Authors
- Yap, Y. L., Wang, C., Sing, S. L., Dikshit, V., Yeong, W. Y., & Wei, J.
- Venue
- Precision Engineering
- Publisher
- Elsevier BV
- Published
- 2017-10
- Volume
- 50
- Pages
- 275-285
- ISSN
- 0141-6359 (ISSN-L)
- OpenAlex
- W2617578267
- Cited by
- 228
- References
- 0
- FWCI
- 11.04
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Material jetting additive manufacturing: An experimental study using designed metrological benchmarks. https://app.cochat.ai/papers/10.1016/j.precisioneng.2017.05.015
- The paper
- Yap, Y. L., Wang, C., Sing, S. L., Dikshit, V., Yeong, W. Y., & Wei, J. (2017). Material jetting additive manufacturing: An experimental study using designed metrological benchmarks. Precision Engineering. https://doi.org/10.1016/j.precisioneng.2017.05.015
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.