The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
Open accessAbstract
As a non-beam-based additive manufacturing (AM) method, binder jet 3D printing (BJ3DP) is a process in which a liquid binder is jetted on layers of powdered materials, selectively joined, and then followed by densification process. Among AM technologies, binder jetting holds distinctive promise because of the possibility of rapid production of complex structures to achieve isotropic properties in the 3D printed samples. By taking advantage of traditional powder metallurgy, BJ3DP machines can produce prototypes in which material properties and surface finish are similar to those attained with traditional powder metallurgy. Various powdered materials have been 3D printed, but a typical challenge during BJ3DP is developing printing and post-processing methods that maximize part performance. Therefore, a detailed review of the physical processes during 3D printing and the fundamental science of densification after sintering and post–heat treatment steps are provided to understand the microstructural evolution and properties of binder jetted parts. Furthermore, to determine the effects of the binder jetting process on metallurgical properties, the role of powder characteristics (e.g., morphology, mean size, distribution), printing process parameters (e.g., layer thickness, print orientation, binder saturation, print speed, drying time), sintering (e.g., temperature, holding time), and post-processing are discussed. With the development of AM technologies and the need for post-processing in 3D printed parts, understanding the microstructural evolution during densification is necessary and here, processing steps are explained. Finally, opportunities for future advancement are addressed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Improved Docking of Polypeptides with Glide
Tubert-Brohman, I., Sherman, W., Repasky, M., & Beuming, T. (2013) · Journal of Chemical Information and Modeling · doi:10.1021/ci400128m · Cited by 1,308
A global sustainability perspective on 3D printing technologies
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950
Zhang, H., Mao, X., Du, Z., Jiang, W., Han, X., Zhao, D., Han, D., & Li, Q. (2016) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2016.1145532 · Cited by 208
Cited by
Extrusion-based additive manufacturing technologies: State of the art and future perspectives
Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
A comprehensive review of lunar-based manufacturing and construction
Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57
Soliman, A., AlAmoodi, N., Karanikolos, G. N., Doumanidis, C. C., & Polychronopoulou, K. (2020) · Nanomaterials · doi:10.3390/nano10112198 · Cited by 53
Hernández, F., & Fragoso, A. (2022) · Applied Sciences · doi:10.3390/app12073539 · Cited by 19
Metadata
- Authors
- Mostafaei, A., Elliott, A. M., Barnes, J. E., Li, F., Tan, W., Cramer, C. L., Nandwana, P., & Chmielus, M.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2021-06
- Volume
- 119
- Pages
- 100707
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W3024964988
- Cited by
- 1,093
- References
- 6
- FWCI
- 49.59
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges. https://app.cochat.ai/papers/10.1016/j.pmatsci.2020.100707
- The paper
- Mostafaei, A., Elliott, A. M., Barnes, J. E., Li, F., Tan, W., Cramer, C. L., Nandwana, P., & Chmielus, M. (2021). Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges. Progress in Materials Science. https://doi.org/10.1016/j.pmatsci.2020.100707
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.