The DOI matches its Crossref record.
Design and analysis of strut-based lattice structures for vibration isolation
Open accessAbstract
This paper presents the design, analysis and experimental verification of strut-based lattice structures to enhance the mechanical vibration isolation properties of a machine frame, whilst also conserving its structural integrity. In addition, design parameters that correlate lattices, with fixed volume and similar material, to natural frequency and structural integrity are also presented. To achieve high efficiency of vibration isolation and to conserve the structural integrity, a trade-off needs to be made between the frame’s natural frequency and its compressive strength. The total area moment of inertia and the mass (at fixed volume and with similar material) are proposed design parameters to compare and select the lattice structures; these parameters are computationally efficient and straight-forward to compute, as opposed to the use of finite element modelling to estimate both natural frequency and compressive strength. However, to validate the design parameters, finite element modelling has been used to determine the theoretical static and dynamic mechanical properties of the lattice structures. The lattices have been fabricated by laser powder bed fusion and experimentally tested to compare their static and dynamic properties to the theoretical model. Correlations between the proposed design parameters, and the natural frequency and strength of the lattices are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Design and Optimization of Lattice Structures: A Review
Pan, C., Han, Y., & Lu, J. (2020) · Applied Sciences · doi:10.3390/app10186374 · Cited by 640
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
Post-processing treatments to enhance additively manufactured polymeric parts: A review
Tamburrino, F., Barone, S., Paoli, A., & Razionale, A. V. (2021) · Virtual and Physical Prototyping · doi:10.1080/17452759.2021.1917039 · Cited by 119
Boccini, E., Furferi, R., Governi, L., Meli, E., Ridolfi, A., Rindi, A., & Volpe, Y. (2019) · Advances in Mechanical Engineering · doi:10.1177/1687814019859789 · Cited by 37
Metadata
- Authors
- Syam, W. P., Jianwei, W., Zhao, B., Maskery, I., Elmadih, W., & Leach, R.
- Venue
- Precision Engineering
- Publisher
- Elsevier BV
- Published
- 2018-04
- Volume
- 52
- Pages
- 494-506
- ISSN
- 0141-6359 (ISSN-L)
- OpenAlex
- W2760349024
- Cited by
- 209
- References
- 0
- FWCI
- 10.13
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.