Burr Formation and Hole Quality when Drilling Titanium and Aluminium Alloys
Open accessThe DOI matches its Crossref record.
Abstract
Following a brief review of key factors affecting burr size and hole quality, the paper details experimental work involving the drilling of Ti-6Al-4 V titanium alloy together with Al7010-T7451 and Al2024-T351 aluminium alloys. Chemical vapour deposited (CVD) diamond coated carbide drills were used for the aluminium workpieces while uncoated carbide tools were employed for the titanium material. An experimental design based on response surface methodology was implemented to identify the effects of cutting speed and feed rate (each at 3 levels) on burr size, hole diameter and out of roundness as well as tool flank wear. Exit burr size was smallest when operating at the intermediate feed rate level for all three workpiece materials, with reductions in burr height of up to 50% and 75% for the titanium and aluminium alloys respectively. Out of roundness did not exceed 0.03 mm while the deviation on hole diameter was less than 0.04 mm in all trials, even after drilling 60 holes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Evaluating Hole Quality in Drilling of Al 6061 Alloys
Uddin, M., Basak, A., Pramanik, A., Singh, S., Krolczyk, G. M., & Prakash, C. (2018) · Materials · doi:10.3390/ma11122443 · Cited by 109
Giasin, K., Ayvar-Soberanis, S., French, T., & Phadnis, V. (2017) · Applied Composite Materials · doi:10.1007/s10443-016-9517-0 · Cited by 88
Kolesnyk, V., Peterka, J., Kuruc, M., Šimna, V., Moravčíková, J., Vopát, T., & Lisovenko, D. (2020) · Materials · doi:10.3390/ma13143232 · Cited by 44
Metadata
- Authors
- Abdelhafeez, A. M., Soo, S. L., Aspinwall, D. K., Dowson, A., & Arnold, D.
- Venue
- Procedia CIRP
- Publisher
- Elsevier BV
- Published
- 2015
- Volume
- 37
- Pages
- 230-235
- ISSN
- 2212-8271 (ISSN-L)
- OpenAlex
- W1882570124
- Cited by
- 95
- References
- 0
- FWCI
- 6.21
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.