Study of the Pore Formation on CoCrMo Alloys by Selective Laser Melting Manufacturing Process
Open accessThe DOI matches its Crossref record.
Abstract
Cobalt-base alloys are widely used in medical applications as is the hardest known biocompatible alloy along with a high wear and/or corrosion resistance. The manufacturing process used on these alloys strongly influences the features produced, therefore it should be carefully controlled to attain the desired quality. Selective laser melting (SLM) is a novel process proposed for the fabrication of biomedical implants with cobalt alloys. In this technique, density is the most important concern as it has a direct influence on the component performance. Due to its different energy inputs given by its processing parameters, it has the potential to control porosity through them. In this work, SLM experiments were carried out on a CoCrMo alloy to study the formation of pores. The analysis showed that the SLM technique enables the building of high dense samples up to 99%, resulting in a mean of porosity of 5.77% and a pore mean size of 0.759 μm2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Zhang, J., Song, B., Wei, Q., Bourell, D., & Shi, Y. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.004 · Cited by 1,205
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
Scipioni Bertoli, U., Wolfer, A. J., Matthews, M. J., Delplanque, J.-P. R., & Schoenung, J. M. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.10.037 · Cited by 796
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
Metadata
- Authors
- Monroy, K., Delgado, J., & Ciurana, J.
- Venue
- Procedia Engineering
- Publisher
- Elsevier BV
- Published
- 2013
- Volume
- 63
- Pages
- 361-369
- ISSN
- 1877-7058 (ISSN-L)
- OpenAlex
- W2001333071
- Cited by
- 144
- References
- 0
- FWCI
- 17.68
- Type
- conference paper
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Study of the Pore Formation on CoCrMo Alloys by Selective Laser Melting Manufacturing Process. https://app.cochat.ai/papers/10.1016/j.proeng.2013.08.227
- The paper
- Monroy, K., Delgado, J., & Ciurana, J. (2013). Study of the Pore Formation on CoCrMo Alloys by Selective Laser Melting Manufacturing Process. Procedia Engineering. https://doi.org/10.1016/j.proeng.2013.08.227
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.