The DOI matches its Crossref record.
Characterization and Utilization of Char Derived from Fast Pyrolysis of Plastic Wastes
Open accessAbstract
HDPE plastic wastes were fast pyrolyzed at temperature of 400-450 °C and char (solid residues) obtained were collected and analyzed. Proximate and ultimate analyses showed that pyrolysis char had a large amount of volatile matter (51.40%) and fixed carbon (46.03%), small amount of moisture (2.41%) and little amount of ash (61.0%). Contents of carbon, hydrogen and nitrogen were found to be 42.65, 3.06, 0.43%, and 1.80%, respectively. Calorific value and density of the char were also determined and reported as 4,500 cal/g and 1.59 g/cm3, respectively. Char derived from the fast pyrolysis of HDPE plastic wastes was crushed into powder and extruded to produce briquettes. One kilogram of the char based briquette was used as a fuel for the combustion process (boiling water). Atmospheric-pressure thermal activation at 900 °C for 3 hours was performed to promote surface area and specific pore volume of the char. Undergoing such an activation process, BET surface area and pore volume of the char were increased by 55% and 44% whereas pore size was reduced by 5%, corresponding to the values of 16.77 m2/g, 0.2080 cm3/g and 496°A, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Catalytic pyrolysis of plastic waste: A review
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., & Nizami, A. S. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.06.022 · Cited by 964
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
Recycling of Bioplastics: Routes and Benefits
Lamberti, F. M., Román-Ramírez, L. A., & Wood, J. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01795-8 · Cited by 365
Sipra, A. T., Gao, N., & Sarwar, H. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.02.012 · Cited by 349
Metadata
- Authors
- Jamradloedluk, J., & Lertsatitthanakorn, C.
- Venue
- Procedia Engineering
- Publisher
- Elsevier BV
- Published
- 2014
- Volume
- 69
- Pages
- 1437-1442
- ISSN
- 1877-7058 (ISSN-L)
- OpenAlex
- W1981981506
- Cited by
- 161
- References
- 0
- FWCI
- 7.71
- Type
- conference paper
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Characterization and Utilization of Char Derived from Fast Pyrolysis of Plastic Wastes. https://app.cochat.ai/papers/10.1016/j.proeng.2014.03.139
- The paper
- Jamradloedluk, J., & Lertsatitthanakorn, C. (2014). Characterization and Utilization of Char Derived from Fast Pyrolysis of Plastic Wastes. Procedia Engineering. https://doi.org/10.1016/j.proeng.2014.03.139
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.