The DOI matches its Crossref record.
Characterization and Utilization of Char Derived from Fast Pyrolysis of Plastic Wastes
Open accessAbstract
HDPE plastic wastes were fast pyrolyzed at temperature of 400-450 °C and char (solid residues) obtained were collected and analyzed. Proximate and ultimate analyses showed that pyrolysis char had a large amount of volatile matter (51.40%) and fixed carbon (46.03%), small amount of moisture (2.41%) and little amount of ash (61.0%). Contents of carbon, hydrogen and nitrogen were found to be 42.65, 3.06, 0.43%, and 1.80%, respectively. Calorific value and density of the char were also determined and reported as 4,500 cal/g and 1.59 g/cm3, respectively. Char derived from the fast pyrolysis of HDPE plastic wastes was crushed into powder and extruded to produce briquettes. One kilogram of the char based briquette was used as a fuel for the combustion process (boiling water). Atmospheric-pressure thermal activation at 900 °C for 3 hours was performed to promote surface area and specific pore volume of the char. Undergoing such an activation process, BET surface area and pore volume of the char were increased by 55% and 44% whereas pore size was reduced by 5%, corresponding to the values of 16.77 m2/g, 0.2080 cm3/g and 496°A, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Catalytic pyrolysis of plastic waste: A review
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., & Nizami, A. S. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.06.022 · Cited by 964
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
Effect of plastic waste types on pyrolysis liquid oil
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., Ismail, I. M. I., & Nizami, A. S. (2017) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2016.09.017 · Cited by 505
Recycling of Bioplastics: Routes and Benefits
Lamberti, F. M., Román-Ramírez, L. A., & Wood, J. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01795-8 · Cited by 365
Sipra, A. T., Gao, N., & Sarwar, H. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.02.012 · Cited by 349
Pyrolysis of plastic species: A review of resources and products
Maqsood, T., Dai, J., Zhang, Y., Guang, M., & Li, B. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105295 · Cited by 315
Harussani, M. M., Sapuan, S. M., Rashid, U., Khalina, A., & Ilyas, R. A. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.149911 · Cited by 255
Non-biodegradable polymeric waste pyrolysis for energy recovery
Dwivedi, P., Mishra, P. K., Mondal, M. K., & Srivastava, N. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e02198 · Cited by 146
Characterization and use of char produced from pyrolysis of post-consumer mixed plastic waste
Martín-Lara, M. A., Piñar, A., Ligero, A., Blázquez, G., & Calero, M. (2021) · Water · doi:10.3390/w13091188 · Cited by 85
Transforming Plastic Waste into Porous Carbon for Capturing Carbon Dioxide: A Review
Hussin, F., Aroua, M. K., Kassim, M. A., & Md. Ali, U. F. (2021) · Energies · doi:10.3390/en14248421 · Cited by 84
Sustainable management of plastic wastes in COVID-19 pandemic: The biochar solution
Igalavithana, A. D., Yuan, X., Attanayake, C. P., Wang, S., You, S., Tsang, D. C. W., Nzihou, A., & Ok, Y. S. (2022) · Environmental Research · doi:10.1016/j.envres.2022.113495 · Cited by 60
Pereira, L., Castillo, V., Calero, M., Blázquez, G., Solís, R. R., & Martín-Lara, M. Á. (2024) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2024.105386 · Cited by 45
Pérez-Huertas, S., Calero, M., Ligero, A., Pérez, A., Terpiłowski, K., & Martín-Lara, M. A. (2023) · Waste Management · doi:10.1016/j.wasman.2023.02.022 · Cited by 45
Chen, W. Q., Fu, X., Veksha, A., Lipik, V., & Lisak, G. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.131868 · Cited by 37
Optimisation of Process Parameters to Maximise the Oil Yield from Pyrolysis of Mixed Waste Plastics
Faisal, F., Rasul, M. G., Chowdhury, A. A., & Jahirul, M. I. (2024) · Sustainability · doi:10.3390/su16072619 · Cited by 30
Zabaniotou, A., & Vaskalis, I. (2023) · Energies · doi:10.3390/en16020593 · Cited by 29
Holistic utilization of waste plastics through a tandem process
Dai, L., Karakas, O., Lata, S., Cobb, K., Lei, H., He, C., Cheng, Y., Chen, P., & Ruan, R. (2023) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2023.110547 · Cited by 12
Metadata
- Authors
- Jamradloedluk, J., & Lertsatitthanakorn, C.
- Venue
- Procedia Engineering
- Publisher
- Elsevier BV
- Published
- 2014
- Volume
- 69
- Pages
- 1437-1442
- ISSN
- 1877-7058 (ISSN-L)
- OpenAlex
- W1981981506
- Cited by
- 161
- References
- 0
- FWCI
- 7.71
- Type
- conference paper
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.