The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Processing and Mechanical Property Evaluation of Banana Fiber Reinforced Polymer Composites
Open accessAbstract
In the fast developing world, the concern for the environmental pollution and the prevention of non-renewable and non-biodegradable resources has attracted researchers seeking to develop new eco-friendly materials and products based on sustainability principles. The fibers from the natural sources provide indisputable advantages over synthetic reinforcement materials such as low cost, low density, non-toxicity, comparable strength, and minimum waste disposal problems. In the present experiment, banana fiber reinforced epoxy composites are prepared and the mechanical properties of these composites are evaluated. The composite samples with different fiber volume fractions were prepared by using the hand lay-up process and apply pressure at room temperature. The samples were subjected to the mechanical testing such as tensile, flexural and impact loading. Scanning electron microscope (SEM) analysis is carried out to evaluate fiber matrix interfaces and analyze the structure of the fractured surfaces.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Due to their high moisture absorption ability, it is often difficult to combine them with hydrophilic polymers [125].”
From Potential Valorization of Banana Production Waste in Developing Countries: Bio-Engineering Aspects (2024) · cites this paper as [125]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The most important characteristics of banana fiber include the following: high durability (average strength of 3.93 cN/dtex), 3% elongation, light weight, medial length of 50~60 mm, medial fineness of 2386 Nm, ability to absorb and release water freely, ability to be spun in various ways like ring spinning, open-end spinning, bast fiber spinning, and semi-worsted spinning, and biodegradability.”
From Potential Valorization of Banana Production Waste in Developing Countries: Bio-Engineering Aspects (2024) · cites this paper as [125]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dynamic mechanical analysis of banana fiber reinforced polyester composites
Pothan, L. A., Oommen, Z., & Thomas, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00254-3 · Cited by 941
Mechanical property evaluation of sisal–jute–glass fiber reinforced polyester composites
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.12.004 · Cited by 773
Self-citationBoopalan, M., Niranjanaa, M., & Umapathy, M. J. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.02.033 · Cited by 579
Joseph, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00098-2 · Cited by 538
Idicula, M., Malhotra, S. K., Joseph, K., & Thomas, S. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.10.023 · Cited by 530
Comparative Evaluation on Properties of Hybrid Glass Fiber- Sisal/Jute Reinforced Epoxy Composites
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.01.106 · Cited by 311
Self-citationPothan, L. A., Thomas, S., & Groeninckx, G. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.09.001 · Cited by 257
Venkateshwaran, N., Elayaperumal, A., & Arunsundaranayagam, D. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.12.001 · Cited by 251
Pothan, L. A., & Thomas, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00092-7 · Cited by 194
Samal, S. K., Mohanty, S., & NAYAK, S. K. (2009) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602550902725407 · Cited by 151
Flagged first, then by citations
Cited by
Sorted by citations
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,663
Plant fibre based bio-composites: Sustainable and renewable green materials
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.094 · Cited by 800
Self-citationKamarudin, S. H., Basri, M. S. M., Rayung, M., Abu, F., Ahmad, S., Norizan, M. N., Osman, S., Sarifuddin, N., Desa, M. S. Z. M., Abdullah, U. H., et al. (2022) · Polymers · doi:10.3390/polym14173698 · Cited by 469
Kenaf (Hibiscus cannabinus L.) fibre based bio-materials: A review on processing and properties
Ramesh, M. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.11.001 · Cited by 328
Self-citationRamesh, M. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.004 · Cited by 256
Self-citationMishra, T., Mandal, P., Rout, A. K., & Sahoo, D. (2022) · Composites Part C Open Access · doi:10.1016/j.jcomc.2022.100298 · Cited by 185
Jeyapragash, R., Srinivasan, V., & Sathiyamurthy, S. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.12.146 · Cited by 168
Amir, N. B., Abidin, K. A. Z., & Shiri, F. B. M. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.04.140 · Cited by 161
A review on plant fiber reinforced thermoset polymers for structural and frictional composites
Chaudhary, V. K., & Ahmad, F. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106792 · Cited by 155
Kenned, J. J., Sankaranarayanasamy, K., & Kumar, C. S. (2020) · Polymers and Polymer Composites · doi:10.1177/0967391120942419 · Cited by 121
A Review on Chemical and Mechanical Properties of Natural Fiber Reinforced Polymer Composites
Srinivas, K. (2017) · International Journal of Performability Engineering · doi:10.23940/ijpe.17.02.p8.189200 · Cited by 118
Development and characterization of alkali treated abaca fiber reinforced friction composites
Liu, Y., Ma, Y., Yu, J., Zhuang, J., Wu, S., & Tong, J. (2018) · Composite Interfaces · doi:10.1080/09276440.2018.1472456 · Cited by 105
Dev, B., Rahman, M. A., Alam, M. R., Repon, M. R., & Nawab, Y. (2023) · Polymer Composites · doi:10.1002/pc.27376 · Cited by 105
Mechanical and Water Intake Properties of Banana-Carbon Hybrid Fiber Reinforced Polymer Composites
Ramesh, M., Logesh, R., Manikandan, M. K. D., Kumar, N. S., & Pratap, D. V. (2017) · Materials Research · doi:10.1590/1980-5373-mr-2016-0760 · Cited by 102
Self-citationThe prospects of natural fiber composites: A brief review
Palanisamy, S., Kavimani, V., Murugesan, T. M., Palaniappan, M., & Santulli, C. (2024) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2024.01.003 · Cited by 102
Dev, B., Rahman, M. A., Repon, M. R., Rahman, M. M., Hajı, A., & Nawab, Y. (2023) · Polymer Composites · doi:10.1002/pc.27633 · Cited by 107
Sathish, S., Kumaresan, K., Prabhu, L., & Vigneshkumar, N. (2017) · Polymers and Polymer Composites · doi:10.1177/096739111702500309 · Cited by 95
Jumaidin, R., Diah, N. A., Ilyas, R. A., Alamjuri, R. H., & Yusof, F. A. M. (2021) · Polymers · doi:10.3390/polym13091420 · Cited by 95
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42968 · Cited by 94
Self-citationBanana Fiber-Reinforced Epoxy Composites: Mechanical Properties and Fire Retardancy
Nguyen, T. A., & Nguyen, T. H. (2021) · International Journal of Chemical Engineering · doi:10.1155/2021/1973644 · Cited by 94
Jain, J., Jain, S., & Sinha, S. (2018) · Journal of Elastomers & Plastics · doi:10.1177/0095244318783024 · Cited by 91
Study on Mechanical Properties of Banana Fiber‐Reinforced Materials Poly (Lactic Acid) Composites
Nguyen, T. A., & Nguyen, T. H. (2022) · International Journal of Chemical Engineering · doi:10.1155/2022/8485038 · Cited by 88
Inbakumar, J. P., & Ramesh, S. (2018) · Transactions of the Canadian Society for Mechanical Engineering · doi:10.1139/tcsme-2017-0079 · Cited by 86
Visco-elastic properties and thermal analysis of corchorus/elastane yarn–reinforced biocomposites
Raja, T., & Devarajan, Y. (2023) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-023-03756-2 · Cited by 84
Effect of Curing Temperature on Mechanical Properties of Natural Fiber Reinforced Polymer Composites
Singh, J. I. P., Singh, S., & Dhawan, V. (2017) · Journal of Natural Fibers · doi:10.1080/15440478.2017.1354744 · Cited by 82
Arpitha, G. R., Jain, N., & Verma, A. (2023) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-023-04300-y · Cited by 81
Singh, R., Kumar, R., & Ranjan, N. (2018) · Journal of The Institution of Engineers (India) Series C · doi:10.1007/s40032-017-0435-1 · Cited by 80
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2016) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-016-0844-5 · Cited by 79
Self-citationTowards widespread properties of cellulosic fibers composites: A comprehensive review
Chakkour, M., Moussa, M. O., Khay, I., Balli, M., & Zineb, T. B. (2022) · Journal of Reinforced Plastics and Composites · doi:10.1177/07316844221112974 · Cited by 72
Patil, A. Y., Banapurmath, N. R., Yaradoddi, J. S., Kotturshettar, B. B., Shettar, A. S., Basavaraj, G. D., Keshavamurthy, R., Khan, T. M. Y., & Mathad, S. N. (2019) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-019-03951-2 · Cited by 70
Oladele, I. O., Makinde-Isola, B. A., Adediran, A. A., Oladejo, M. O., Owa, A. F., & Olayanju, T. M. A. (2020) · Materials Research Express · doi:10.1088/2053-1591/ab8585 · Cited by 65
Belaadi, A., Boumaaza, M., Amroune, S., & Bourchak, M. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-06217-6 · Cited by 65
Makinde-Isola, B. A., Taiwo, A. S., Oladele, I. O., Akinwekomi, A. D., Adelani, S. O., & Onuh, L. N. (2023) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057231186324 · Cited by 61
Raja, T., & Anand, P. (2021) · Journal of Testing and Evaluation · doi:10.1520/jte20200580 · Cited by 60
Raja, T., & Anand, P. (2019) · Journal of Testing and Evaluation · doi:10.1520/jte20180640 · Cited by 59
Islam, S., Hasan, M. B., Kodrić, M., Motaleb, K. Z. M. A., Karim, F., & Islam, M. R. (2025) · SPE Polymers · doi:10.1002/pls2.10173 · Cited by 63
Effect of Surface Modification of Vetiver Fibers on Their Physical and Thermal Properties
Jena, P. K., Mohanty, J. R., & Nayak, S. (2020) · Journal of Natural Fibers · doi:10.1080/15440478.2020.1726249 · Cited by 59
Gupta, U. S., Dhamarikar, M., Dharkar, A., Tiwari, S., & Namdeo, R. (2020) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-020-00179-9 · Cited by 59
Jafrey Daniel James, D., Raghunathan, V., Ramesh, M., Ayyappan, V., Rangappa, S. M., & Siengchin, S. (2024) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-024-06124-w · Cited by 57
Self-citationWater hyacinth (Eichhornia crassipes) natural composite extraction methods and properties – A review
Ajithram, A., Jappes, J. T. W., & Brintha, N. C. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.08.472 · Cited by 57
Performance of concrete beams reinforced using banana fiber bars
Elbehiry, A., Elnawawy, O., Kassem, M. E., Zaher, A. H., Uddin, N., & Mostafa, M. (2020) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2020.e00361 · Cited by 56
Libog, L., Biyeme, F., Betené, A. D. O., Biwôlé, A. B., Ndiwé, B., Mbang, J. P. E., Takoumbe, C., Mbey, J. A., & Meva’a, J. R. L. (2023) · Journal of Natural Fibers · doi:10.1080/15440478.2023.2204451 · Cited by 53
Ramesh, M., Deepa, C., Aswin, U. S., Eashwar, H., Mahadevan, B., & Murugan, D. (2016) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-016-0874-z · Cited by 53
Self-citationStrength characteristics of banana and sisal fiber reinforced composites
Bharathi, S. V., Vinodhkumar, S., & Saravanan, M. M. (2021) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1055/1/012024 · Cited by 53
Eixenberger, D., Carballo-Arce, A.-F., Vega-Baudrit, J.-R., Trimino-Vazquez, H., Villegas-Peñaranda, L. R., Stöbener, A., Aguilar, F., Mora-Villalobos, J.-A., Sandoval-Barrantes, M., Bubenheim, P., et al. (2024) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-022-02721-9 · Cited by 51
Ramesh, M., Deepa, C., Arpitha, G. R., & Gopinath, V. (2019) · World Journal of Engineering · doi:10.1108/wje-04-2018-0125 · Cited by 51
Self-citationChandgude, S., & Salunkhe, S. S. (2020) · Polymer Composites · doi:10.1002/pc.25801 · Cited by 47
Kannan, G., & Thangaraju, R. (2022) · Journal of Natural Fibers · doi:10.1080/15440478.2022.2154630 · Cited by 46
Paul, R., Gouda, K., & Bhowmik, S. (2020) · Silicon · doi:10.1007/s12633-020-00613-z · Cited by 46
Belaadi, A., Laouici, H., & Bourchak, M. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04761-4 · Cited by 45
Kumar, K. P., Keshavan, D., Natarajan, E., Narayan, A., Kumar, K. A., Deepak, M., & Freitas, L. I. (2020) · Progress in Rubber Plastics and Recycling Technology · doi:10.1177/1477760619895011 · Cited by 45
Olcay, H., & Koçak, D. (2020) · Journal of Industrial Textiles · doi:10.1177/1528083720934193 · Cited by 44
Venkataravanappa, R. Y., Lakshmikanthan, A., Kapilan, N., Chandrashekarappa, M. P. G., Der, O., & Erçetin, A. (2023) · Journal of Composites Science · doi:10.3390/jcs7070266 · Cited by 45
State of Art Review on Natural Fibers
Shireesha, Y., & Nandipati, G. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.06.272 · Cited by 42
Adda, B., Belaadi, A., Boumaaza, M., & Bourchak, M. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07628-9 · Cited by 42
Selvi, S. T., Sunitha, R., Ammayappan, L., & Prakash, C. (2022) · Journal of Natural Fibers · doi:10.1080/15440478.2022.2142726 · Cited by 42
Shahinur, S., & Hasan, M. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10987-7 · Cited by 39
Arı, A., Karahan, M., Ahmed, H. A. M., Babiker, O., & Dehşet, R. M. A. (2023) · AATCC Journal of Research · doi:10.1177/24723444221147365 · Cited by 38
Green composites in bone tissue engineering
Jouyandeh, M., Vahabi, H., Rabiee, N., Rabiee, M., Bagherzadeh, M., & Saeb, M. R. (2021) · Emergent Materials · doi:10.1007/s42247-021-00276-5 · Cited by 37
Raja, T., & Anand, P. (2019) · Materials Performance and Characterization · doi:10.1520/mpc20190135 · Cited by 36
Fabrication of Glass/Jute/Epoxy Composite Based Industrial Safety Helmet
Bajpai, P. K., Ram, K., Gahlot, L. K., & Jha, V. K. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.12.296 · Cited by 36
Jagadish, J., Patel, G. C. M., Sibalija, T. V., Mumtaz, J., & Li, Z. (2022) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-022-03378-1 · Cited by 36
Polymer composites with functionalized natural fibers
Varghese, A. M., & Mittal, V. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100970-3.00006-7 · Cited by 35
Mohammadi, B., Ershad‐Langroudi, A., Moradi, G., Safaiyan, A., & Habibi, P. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103872 · Cited by 35
Ramesh, M., Bhoopathi, R., Deepa, C., & Sasikala, G. (2018) · Journal of the Chinese Advanced Materials Society · doi:10.1080/22243682.2018.1534609 · Cited by 34
Self-citationRaja, T., Mohanavel, V., Sathish, T., Djearamane, S., Velmurugan, P., Karthick, A., Nasif, O., Alfarraj, S. A., Wong, L. S., Sureshkumar, S., et al. (2021) · Polymers · doi:10.3390/polym13223859 · Cited by 34
Utilization of banana stalk fiber as reinforcement in low density polyethylene composite
Ogunsile, B. O., & Oladeji, T. G. (2016) · Matéria (Rio de Janeiro) · doi:10.1590/s1517-707620160004.0088 · Cited by 32
Sathishkumar, G. K., Gautham, G., Shankar, G. G., Rajkumar, G., Karpagam, R., Dhivya, V., Zacharia, G., Gopinath, B., Karthik, P., & Charles, M. M. (2021) · Polymer Bulletin · doi:10.1007/s00289-020-03524-6 · Cited by 32
Plastic/Natural Fiber Composite Based on Recycled Expanded Polystyrene Foam Waste
Sriprom, W., Sirivallop, A., Choodum, A., Limsakul, W., & Wongniramaikul, W. (2022) · Polymers · doi:10.3390/polym14112241 · Cited by 34
Billah, M. M., Rabbi, M. S., & Hasan, A. (2021) · Journal of Engineering Advancements · doi:10.38032/jea.2021.01.003 · Cited by 31
Tabet, Z., Belaadi, A., Boumaaza, M., & Bourchak, M. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07679-y · Cited by 43
Production of thermally cured polystyrene composite reinforced with aluminium powder and clay
Adeniyi, A. G., Abdulkareem, S. A., Odimayomi, K. P., Emenike, E. C., & Iwuozor, K. O. (2022) · Environmental Challenges · doi:10.1016/j.envc.2022.100608 · Cited by 31
Gbadeyan, O. J., Adali, S., Bright, G., Sithole, B. B., & Lekha, P. (2021) · Journal of Composite Materials · doi:10.1177/00219983211013418 · Cited by 29
Rajamanickam, S. K., Manoharan, M., Ganesan, S., Natarajan, P., & Rajasekaran, P. (2021) · Journal of Natural Fibers · doi:10.1080/15440478.2020.1870622 · Cited by 28
Palanisamy, S., Murugesan, T. M., Palaniappan, M., Santulli, C., & Ayrılmış, N. (2024) · Environmental Research and Technology · doi:10.35208/ert.1397380 · Cited by 27
Ahmad, M. N., Ishak, M. R., & Yasir, A. S. H. M. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.10.104 · Cited by 27
Study of natural fibre composite material and its hybridization techniques
Gaurav, G., Gohal, H., Kumar, V. M., & Jena, H. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.02.277 · Cited by 27
Valorization of Plantain Stalk and Polystyrene Wastes for Composite Development
Adeniyi, A. G., Onifade, D. V., Abdulkareem, S. A., Amosa, M. K., & Ighalo, J. O. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01796-7 · Cited by 26
Adediran, A. A., Balogun, O. A., Akinwande, A. A., Mwema, F. M., Adesina, O. S., & Olayanju, T. M. A. (2021) · The Scientific World JOURNAL · doi:10.1155/2021/8891563 · Cited by 26
Kannan, G., Thangaraju, R., Palanikumar, K., & Davim, J. P. (2022) · Journal of Natural Fibers · doi:10.1080/15440478.2022.2025977 · Cited by 26
Kannan, G., Thangaraju, R., Suttiruengwong, S., Shanmugam, V., Rangappa, S. M., Sumesh, K. R., Kurien, R. A., & Siengchin, S. (2024) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-024-06140-w · Cited by 25
Jusoh, A. F., Rejab, M. R. M., Siregar, J. P., & Bachtiar, D. (2016) · MATEC Web of Conferences · doi:10.1051/matecconf/20167400033 · Cited by 25
Analysis on mechanical and thermal properties of glass-carbon/epoxy based hybrid composites
Ambigai, R., & Prabhu, S. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/402/1/012136 · Cited by 24
Introduction to Epoxy Composites
Pulikkalparambil, H., Rangappa, S. M., Siengchin, S., & Parameswaranpillai, J. (2021) · doi:10.1002/9783527824083.ch1 · Cited by 23
Jayamani, E., Hamdan, S., Ezhumalai, P., & Bakri, M. K. B. (2016) · Jurnal Teknologi · doi:10.11113/jt.v78.9195 · Cited by 22
Oladele, I. O., Ayanleye, O. T., Adediran, A. A., Makinde-Isola, B. A., Taiwo, A. S., & Akinlabi, E. T. (2020) · Fibers · doi:10.3390/fib8070044 · Cited by 22
Thermoset and thermoplastic polymer composite with date palm fiber and its behavior: A review
Islam, S., Karim, F., Islam, M. R., Saeed, M. A., Alam, K. A., & Khatun, M. M. (2024) · SPE Polymers · doi:10.1002/pls2.10157 · Cited by 21
Kumar, S. D., Sankar, L. P., Sathish, T., Vijayan, V., Parthiban, A., Kamalakannan, R., & Rajkumar, S. (2021) · Advances in Materials Science and Engineering · doi:10.1155/2021/7813634 · Cited by 21
RetractedOladele, I. O., Onuh, L. N., Taiwo, A. S., Borisade, S. G., Agbeboh, N. I., & Lephuthing, S. S. (2022) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2022.2084174 · Cited by 21
Wulandari, A. P., Awis, V. P. D., Budiono, R., Kusmoro, J., Hidayat, S. S., Masruchin, N., Lubis, M. A. R., Fatrıasarı, W., & Rachmawati, U. (2023) · Materials · doi:10.3390/ma16134758 · Cited by 21
Syduzzaman, M., Akter, M., Mahmud, F., Bhowmick, D. R., Maliha, A. S., Fahmi, F. F., Hossain, M. T., & Ahamed, M. A. (2024) · SPE Polymers · doi:10.1002/pls2.10125 · Cited by 21
Garadimani, K. R., Raju, G. U., & Kodancha, K. G. (2015) · American journal of materials science · Cited by 21
Optimization of mechanical properties of green composites by gray relational analysis
Pandya, V. J., & Rathod, P. P. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.08.166 · Cited by 21
Natural Fiber Reinforced Polymer Composites as Sustainable Green Composites
Islam, M. S., Islam, S., & Hasan, M. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00257-1 · Cited by 21
Boobalan, V., Sathish, T., Giri, J. P., & Makki, E. (2024) · AIP Advances · doi:10.1063/5.0199895 · Cited by 20
Palanisamy, S., Murugesan, T. M., Palaniappan, M., Santulli, C., Ayrılmış, N., & Alavudeen, A. (2023) · BioResources · doi:10.15376/biores.19.1.palanisamy · Cited by 20
Wang, Z., Bekele, L. D., Qiu, Y., Dai, Y., Zhu, S., Sarsaiya, S., & Chen, J. (2019) · Bioengineered · doi:10.1080/21655979.2019.1661694 · Cited by 20
Experimental Studies on Water Absorption Behaviour of Treated and Untreated Hybrid Bio-Composites
Girimurugan, R., Saravanan, K., Manickavasagam, P., Gurunathan, G., & Madeshwaren, V. (2021) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1059/1/012017 · Cited by 19
Wondmagegnehu, B. T., Paramasivam, V., & Selvaraj, S. K. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.12.984 · Cited by 19
Metadata
- Authors
- Ramesh, M., Atreya, T. S. A., Aswin, U. S., Eashwar, H., & Deepa, C.
- Affiliations
- Sri Sairam Engineering College (IN)
- Sathyabama Institute of Science and Technology (IN)
- Corresponding author
- Ramesh, M.
- ORCID
- Venue
- Procedia Engineering
- Publisher
- Elsevier BV
- Published
- 2014
- Volume
- 97
- Pages
- 563-572
- ISSN
- 1877-7058 (ISSN-L)
- OpenAlex
- W2048121062
- Cited by
- 289
- References
- 22
- Citations by year
- 2026: 26 · 2025: 23 · 2024: 26 · 2023: 24 · 2022: 48 · 2021: 43 · 2020: 34 · 2019: 25 · 2018: 18 · 2017: 10 · 2016: 7 · 2015: 5
- FWCI
- 36.58
- Type
- conference paper
- Language
- en
- Open access
- diamond
- doi.org
- Licence
- Locations
- Procedia Engineering (publishedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Engineering › Mechanical Engineering › Fiber-reinforced polymer composites
- Physical Sciences › Engineering › Civil and Structural Engineering › Innovative concrete reinforcement materials
- Keywords
- banana fiber, natural fiber composites, epoxy composites, mechanical properties, tensile strength, flexural strength, impact strength, fiber volume fraction, fiber-matrix interface, fracture morphology, eco-friendly materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
