The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
The Effect of Layer Thickness at Selective Laser Melting
Open accessAbstract
Selective laser melting technology involves various parameters which may influence properties of the resulting part. This study presents the correlation between powder layer thickness and relative density, microstructure and mechanical properties of nickel-based superalloy produced by selective laser melting. It is shown that the microstructure of the bulk material consists of columnar dendritic cells. The size of these cells depends on the layer thickness used during SLM. Tensile strength and elongation at break also depend on the powder layer thickness during SLM. Samples build with 30 μm layer thickness demonstrate higher strength and lower elongation at break than those build with 50 μm layer thickness. It is also established that the horizontally build samples show higher strength properties and lower plasticity compared to the vertically build samples.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of titanium alloy for aircraft components
Uhlmann, E., Kersting, R., Klein, T. B., Cruz, M. F., & Borille, A. V. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.08.061 · Cited by 386
Cited by
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Powder Bed Fusion of nickel-based superalloys: A review
Sanchez, S., Smith, P., Xu, Z., Gaspard, G., Hyde, C. J., Wits, W. W., Ashcroft, I. A., Chen, H., & Clare, A. T. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103729 · Cited by 541
Maamoun, A. H., Xue, Y. F., Elbestawi, M. A., & Veldhuis, S. C. (2018) · Materials · doi:10.3390/ma11122343 · Cited by 311
End to end process evaluation for additively manufactured liquid rocket engine thrust chambers
Kerstens, F., Cervone, A., & Gradl, P. (2021) · Acta Astronautica · doi:10.1016/j.actaastro.2021.02.034 · Cited by 121
Raghavan, S., Dzugan, J., Rzepa, S., Podany, P., Soh, N., Hao, L. J., & Khan, N. (2023) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2022-0089 · Cited by 8
Metadata
- Authors
- Sufiiarov, V. S., Popovich, A. A., Borisov, E. V., Polozov, I. A., Masaylo, D. V., & Orlov, A. V.
- Venue
- Procedia Engineering
- Publisher
- Elsevier BV
- Published
- 2017
- Volume
- 174
- Pages
- 126-134
- ISSN
- 1877-7058 (ISSN-L)
- OpenAlex
- W2592704084
- Cited by
- 200
- References
- 1
- FWCI
- 46.39
- Type
- conference paper
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Effect of Layer Thickness at Selective Laser Melting. https://app.cochat.ai/papers/10.1016/j.proeng.2017.01.179
- The paper
- Sufiiarov, V. S., Popovich, A. A., Borisov, E. V., Polozov, I. A., Masaylo, D. V., & Orlov, A. V. (2017). The Effect of Layer Thickness at Selective Laser Melting. Procedia Engineering. https://doi.org/10.1016/j.proeng.2017.01.179
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.