Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 236

The DOI matches its Crossref record.

Comparing the mechanical properties of pressed, milled, and 3D-printed resins for occlusal devices

Berli, Constantin, Thieringer, Florian M., Sharma, Neha, Müller, Johannes A., Dedem, Philipp, Fischer, Jens, Rohr, Nadja·2020·The Journal of Prosthetic Dentistry

Abstract

STATEMENT OF PROBLEM Comparisons of the material qualities of pressed, milled, and 3D-printed occlusal devices are sparse, complicating informed decisions on material choice. PURPOSE The purpose of this in vitro study was to compare the material properties of pressed, milled, and 3D-printed resins, as well as how these are affected by thermal aging. These data were then used to estimate the likely clinical performance of the tested materials. MATERIAL AND METHODS Three pressed (ProBase Cold; Ivoclar Vivadent AG, Palapress clear; Kulzer GmbH, Aesthetic Blue clear; Candulor), 3 milled (Temp Premium Flexible Transpa; Zirkonzahn, idodentine PMMA transparent; Unión Dental S.A., Yamahachi PMMA clear; Yamahachi Dental MFG), and three 3D-printed (Freeprint splint; DETAX GmbH, LuxaPrint Ortho Plus; DMG GmbH, Nextdent Ortho Clear; Vertex-Dental B.V.) resin materials were evaluated. Flexural strength, Martens hardness (HM), Vickers hardness (HV), water sorption, water solubility, and surface topography were analyzed. The tests were carried out after 50 hours of water storage at 37 °C (baseline) and after simulated aging (50 hours of water storage at 37 °C, followed by 20 000 thermocycles [TC] at 5 °C and 55 °C). RESULTS At baseline, the mean flexural strength values were 92.8 to 99.5 MPa for pressed, 95.1 to 122.0 MPa for milled, and 19.5 to 91.3 MPa for 3D-printed materials. After aging, these values were 87.6 to 93.5 MPa for pressed, 93.1 to 116.0 MPa for milled, and 13.0 to 63.3 MPa for 3D-printed resins. The mean HM values were 130.1 to 134.1 N/mm for pressed and 130.3 to 158.5 N/mm for milled resins. After aging, the mean HM ranged from 121.6 to 124.2 N/mm for pressed and 116.2 to 149.7 N/mm for milled resins. The mean HV values were 18.2 to 19.9 for pressed and 18.4 to 23.0 for milled resins before aging and 16.9 to 18.7 for pressed and 17.3 to 22.3 N/mm for milled resins after aging. Printed resins could not be measured. At baseline, the mean modulus of elasticity ranged from 4.6 to 4.8 GPa for pressed and from 4.7 to 5.3 GPa for milled resins. For 3D-printed resins, only 1 material could be measured (3.7 GPa). The mean sorption values were 8.6 to 9.2 μg/mm3 for pressed, 7.9 to 10.5 μg/mm3 for milled, and 9.2 to 21.2 μg/mm3 for additive resins. After aging, these values were 21.1 to 22.6 μg/mm3 for pressed, 20.5 to 23.7 μg/mm3 for milled, and 19.4 to 45.5 μg/mm3 for 3D-printed resins. The mean solubility values ranged from 0.3 to 1.4 μg/mm3 for pressed, 0.4 to 1.7 μg/mm3 for milled, and -3.5 to 11 μg/mm3 for 3D-printed materials. CONCLUSIONS Pressed and milled resins can be considered equivalent in terms of their material properties. Relative to the pressed and milled resins, the 3D-printed resins had lower flexural strength and hardness values and higher water sorption and solubility.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.prosdent.2019.10.024

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 236

Metadata

Authors
Berli, C., Thieringer, F. M., Sharma, N., Müller, J. A., Dedem, P., Fischer, J., & Rohr, N.
Venue
The Journal of Prosthetic Dentistry
Publisher
Elsevier BV
Published
2020-12
Volume
124
Issue
6
Pages
780-786
ISSN
0022-3913 (ISSN-L)
OpenAlex
W3000580093
Cited by
236
References
0
FWCI
26.84
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Comparing the mechanical properties of pressed, milled, and 3D-printed resins for occlusal devices. https://app.cochat.ai/papers/10.1016/j.prosdent.2019.10.024
The paper
Berli, C., Thieringer, F. M., Sharma, N., Müller, J. A., Dedem, P., Fischer, J., & Rohr, N. (2020). Comparing the mechanical properties of pressed, milled, and 3D-printed resins for occlusal devices. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2019.10.024

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.