The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Thermal energy storage in building integrated thermal systems: A review. Part 2. Integration as passive system
Open accessAbstract
Energy consumption trends in residential and commercial buildings show a significant increase in recent decades. One of the key points for reducing energy consumption in buildings is to decrease the energy demand. Buildings envelopes are not just a structure they also provide protection from outdoor weather conditions always taking into account the local climate. Thermal energy storage has been used and applied to the building structure by taking advantage of sensible heat storage of materials with high thermal mass. But in recent years, researchers have focused their studies on the implementation of latent heat storage materials that if well incorporated could have high potential in energy demand reduction without occupying the space required by sensible storage. The aim of this study is to review the thermal energy storage passive systems that have been integrated in building components such as walls, ceilings or floors, and to classify them depending on their component integration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heat and cold storage with PCM: An up to date introduction into basics and applications
Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894
Self-citationKuznik, F., Virgone, J., & Johannes, K. (2011) · Renewable Energy · doi:10.1016/j.renene.2010.11.008 · Cited by 213
Zhou, G., Zhang, Y., Wang, X., Lin, K., & Xiao, W. (2007) · Solar Energy · doi:10.1016/j.solener.2007.01.014 · Cited by 155
Cited by
Potential of macroencapsulated PCM for thermal energy storage in buildings : a comprehensive review
Rathore, P. K. S., & Shukla, S. K. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.221 · Cited by 396
An interdisciplinary review of energy storage for communities: Challenges and perspectives
Parra, D., Swierczynski, M., Stroe, D. I., Norman, S. A., Abdon, A., Worlitschek, J., O’Doherty, T., Rodrigues, L., Gillott, M., Zhang, X., et al. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.003 · Cited by 307
Potential of microencapsulated PCM for energy savings in buildings: A critical review
Singh Rathore, P. K., Shukla, S. K., & Gupta, N. K. (2020) · Sustainable Cities and Society · doi:10.1016/j.scs.2019.101884 · Cited by 216
Metadata
- Authors
- Navarro, L., de Gracia, A., Niall, D., Castell, A., Browne, M., McCormack, S. J., Griffiths, P., & Cabeza, L. F.
- Venue
- Renewable Energy
- Publisher
- Elsevier BV
- Published
- 2016-01
- Volume
- 85
- Pages
- 1334-1356
- ISSN
- 0960-1481 (ISSN-L)
- OpenAlex
- W1895367275
- Cited by
- 283
- References
- 3
- FWCI
- 21.25
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
