An assessment of mixed type PCM-gypsum and shape-stabilized PCM plates in a building for passive solar heating

Heat Transfer

Holman, J. P. (1976) · Cited by 9,153 · see citing works

Micro-encapsulated phase-change materials integrated into construction materials

Schossig, P., Henning, H., Gschwander, S., & HAUSSMANN, T. (2005) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2005.01.017 · Cited by 606 · see citing works

Investigation of the thermal performance of a passive solar test-room with wall latent heat storage

Athienitis, A. K., Liu, C., Hawes, D. W., Banu, D., & Feldman, D. G. (1997) · Building and Environment · doi:10.1016/s0360-1323(97)00009-7 · Cited by 438 · see citing works

Preparation of polyethylene–paraffin compound as a form-stable solid-liquid phase change material

Hong, Y. (2000) · Solar Energy Materials and Solar Cells · doi:10.1016/s0927-0248(00)00041-6 · Cited by 363 · see citing works

Preparation and performance of shape stabilized phase change thermal storage materials with high thermal conductivity

Xiao, M., Feng, B., & Gong, K. (2002) · Energy Conversion and Management · doi:10.1016/s0196-8904(01)00010-3 · Cited by 359 · see citing works

Thermal dynamics of wallboard with latent heat storage

Neeper, D. A. (2000) · Solar Energy · doi:10.1016/s0038-092x(00)00012-8 · Cited by 352 · see citing works

A multicomponent PCM wall optimized for passive solar heating

Peippo, K., Kauranen, P., & Lund, P. D. (1991) · Energy and Buildings · doi:10.1016/0378-7788(91)90009-r · Cited by 350 · see citing works

Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings

Zhang, Y. P., Lin, K., Yang, R. C., Di, H. F., & Jiang, Y. (2006) · Energy and Buildings · doi:10.1016/j.enbuild.2006.02.009 · Cited by 328 · see citing works

00/03523 Thermal dynamics of wallboard with latent heat storage

(2000) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(00)94595-8 · Cited by 280 · see citing works

Evaluation of thermophysical characteristics on shape-stabilized paraffin as a solid-liquid phase change material

Inaba, H., & Tu, P. (1997) · Heat and Mass Transfer · doi:10.1007/s002310050126 · Cited by 269 · see citing works

Numerical modelling and thermal simulation of PCM–gypsum composites with ESP-r

Heim, D., & Clarke, J. A. (2004) · Energy and Buildings · doi:10.1016/j.enbuild.2004.01.004 · Cited by 237 · see citing works

Impact of phase change wall room on indoor thermal environment in winter

Lv, S., Zhu, N., & Guohui, F. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2005.02.007 · Cited by 234 · see citing works

Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings

Xu, X., Zhang, Y., Lin, K., Di, H., & Yang, R. C. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2004.12.016 · Cited by 203 · see citing works

Modeling and simulation of under-floor electric heating system with shape-stabilized PCM plates

Lin, K., Zhang, Y., Xu, X., Di, H., Yang, R. C., & Qin, P. (2004) · Building and Environment · doi:10.1016/j.buildenv.2004.04.005 · Cited by 153 · see citing works

Thermal performance of a high conductive shape-stabilized thermal storage material

Xiao, M., Feng, B., & Gong, K. (2001) · Solar Energy Materials and Solar Cells · doi:10.1016/s0927-0248(01)00056-3 · Cited by 143 · see citing works

What are the Potential Benefits of Including Latent Storage in Common Wallboard?

Stovall, T. K., & Tomlinson, J. J. (1995) · Journal of Solar Energy Engineering · doi:10.1115/1.2847868 · Cited by 119 · see citing works

Simulation of phase change drywalls in a passive solar building

Darkwa, K., & O'Callaghan, P. W. (2005) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2005.10.007 · Cited by 113 · see citing works

Radiation Analysis by the Network Method

Oppenheim, A. K. (1956) · Transactions of the American Society of Mechanical Engineers · doi:10.1115/1.4013795 · Cited by 105 · see citing works

Simulation of an integrated PCM-wallboard system

Kim, J.-S., & Darkwa, K. (2003) · International Journal of Energy Research · doi:10.1002/er.869 · Cited by 65 · see citing works

Dynamics of energy storage in phase change drywall systems

Darkwa, K., & Kim, J.-S. (2005) · International Journal of Energy Research · doi:10.1002/er.1062 · Cited by 59 · see citing works

Heat transfer in neuron composite laminated phase-change drywall

Darkwa, K., & Kim, J.-S. (2004) · Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy · doi:10.1243/095765004773644085 · Cited by 34 · see citing works

Numerical analysis of effective thermal conductivity of mixed solid materials

Zhang, Y., & Xingang, L. (1995) · Materials & Design (1980-2015) · doi:10.1016/0261-3069(95)00021-p · Cited by 13 · see citing works

Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency

Soares, N., Costa, J. J., Gaspar, A. R., & Santos, P. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2012.12.042 · Cited by 1,063 · see citing works

A review on phase change materials integrated in building walls

Kuznik, F., David, D., Johannes, K., & Roux, J.-J. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.019 · Cited by 1,061 · see citing works

Development of phase change materials based microencapsulated technology for buildings: A review

Tyagi, V. V., Kaushik, S. C., Tyagi, S. K., & Akiyama, T. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.10.006 · Cited by 780 · see citing works

Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A review

Giró-Paloma, J., Martínez, M., Cabeza, L. F., & Fernández, A. I. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.040 · Cited by 598 · see citing works

Sustainable thermal energy storage technologies for buildings: A review

Parameshwaran, R., Kalaiselvam, S., Harikrishnan, S., & Elayaperumal, A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.058 · Cited by 367 · see citing works

Dynamic characteristics and energy performance of buildings using phase change materials: A review

Zhu, N., Ma, Z., & Wang, S. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.08.019 · Cited by 346 · see citing works

Form-stable phase change materials for thermal energy storage

Kenisarin, M. M., & Kenisarina, K. M. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.015 · Cited by 325 · see citing works

Modeling phase change materials embedded in building enclosure: A review

Al-Saadi, S. N., & Zhai, Z. J. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.01.024 · Cited by 312 · see citing works

Thermal energy storage in building integrated thermal systems: A review. Part 2. Integration as passive system

Navarro, L., de Gracia, Á., Niall, D., Castell, A., Browne, M. C., McCormack, S. J., Griffiths, P. W., & Cabeza, L. F. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.06.064 · Cited by 282 · see citing works

Integrating phase change materials in construction materials: Critical review

Marani, A., & Nehdi, M. L. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.064 · Cited by 266 · see citing works

Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard

Biswas, K., Lu, J., Soroushian, P., & Shrestha, S. S. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.02.047 · Cited by 257 · see citing works

A review on phase change material application in building

Cui, Y., Xie, J., Liu, J., Wang, J. P., & Chen, S. (2017) · Advances in Mechanical Engineering · doi:10.1177/1687814017700828 · Cited by 243 · see citing works

Application of PCM thermal energy storage system to reduce building energy consumption

Jeon, J., Lee, J.-H., Seo, J., Jeong, S., & Kim, S. (2012) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-012-2291-9 · Cited by 229 · see citing works

Novel concept of composite phase change material wall system for year-round thermal energy savings

Diaconu, B., & Cruceru, M. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.05.012 · Cited by 221 · see citing works

Advanced energy storage materials for building applications and their thermal performance characterization: A review

Khadiran, T., Hussein, M. Z., Zainal, Z., & Rusli, R. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.081 · Cited by 221 · see citing works

Technology of Latent Heat Storage for High Temperature Application: A Review

Nomura, T., Okinaka, N., & Akiyama, T. (2010) · ISIJ International · doi:10.2355/isijinternational.50.1229 · Cited by 218 · see citing works

A review on phase change cold storage in air-conditioning system: Materials and applications

Zhai, X. Q., Wang, X., Wang, T., & Wang, R. Z. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.02.013 · Cited by 207 · see citing works

Phase change material's (PCM) impacts on the energy performance and thermal comfort of buildings in a mild climate

Nghana, B., & Tariku, F. A. (2016) · Building and Environment · doi:10.1016/j.buildenv.2016.01.023 · Cited by 186 · see citing works

Resilient cooling strategies – A critical review and qualitative assessment

Zhang, C., Kazanci, O. B., Levinson, R., Heiselberg, P., Olesen, B. W., Chiesa, G., Sodagar, B., Ai, Z., Selkowitz, S., Zinzi, M., et al. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111312 · Cited by 180 · see citing works

Multi-dimensional optimization of the incorporation of PCM-drywalls in lightweight steel-framed residential buildings in different climates

Soares, N., Gaspar, A. R., Santos, P., & Costa, J. J. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.11.072 · Cited by 177 · see citing works

Review on thermal performance of phase change energy storage building envelope

Wang, X., Zhang, Y., Xiao, W., Zeng, R., Zhang, Q., & Di, H. (2009) · 中国科学通报：英文版 · doi:10.1007/s11434-009-0120-8 · Cited by 166 · see citing works

Micro-Encapsulated Phase Change Materials: A Review of Encapsulation, Safety and Thermal Characteristics

Hassan, A., Laghari, M. S., & Rashid, Y. (2016) · Sustainability · doi:10.3390/su8101046 · Cited by 165 · see citing works

Review of Phase Change Materials Integrated in Building Walls for Energy Saving

Cui, Y., Xie, J., Liu, J., & Pan, S. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.09.027 · Cited by 163 · see citing works

Applications of Phase Change Material in highly energy-efficient houses

Rodríguez-Ubiñas, E., Ruiz-Valero, L., Sánchez, S. V., & Neila, J. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.03.018 · Cited by 157 · see citing works

Micro-encapsulated paraffin/high-density polyethylene/wood flour composite as form-stable phase change material for thermal energy storage

Li, J., Xue, P., Ding, W., Han, J., & Sun, G. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.06.007 · Cited by 152 · see citing works

Preparation, thermal properties and applications of shape-stabilized thermal energy storage materials

Fang, G., Tang, F., & Cao, L. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.179 · Cited by 151 · see citing works

Diurnal thermal analysis of microencapsulated PCM-concrete composite walls

Thiele, A. M., Sant, G., & Pilon, L. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.12.078 · Cited by 136 · see citing works

Energy efficiency and thermal performance of lightweight steel-framed (LSF) construction: A review

Soares, N., Santos, P., Gervásio, H., Costa, J. J., & da Silva, L. S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.066 · Cited by 136 · see citing works

Analytical optimization of interior PCM for energy storage in a lightweight passive solar room

Xiao, W., Wang, X., & Zhang, Y. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.12.011 · Cited by 133 · see citing works

Synthesis and characterization of lauric acid/expanded vermiculite as form-stabilized thermal energy storage materials

Wen, R., Huang, Z., Huang, Y., Zhang, X., Min, X., Fang, M., Liu, Y., & Wu, X. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.01.023 · Cited by 127 · see citing works

Low-cost phase change material as an energy storage medium in building envelopes: Experimental and numerical analyses

Biswas, K., & Abhari, R. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.09.003 · Cited by 125 · see citing works

Review on optimization of phase change parameters in phase change material building envelopes

Cai, R., Sun, Z., Yu, H., Meng, E., Wang, J., & Dai, M.-L. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101979 · Cited by 116 · see citing works

Inclusion of methyl stearate/diatomite composite in gypsum board ceiling for building energy conservation

Abden, M. J., Tao, Z., Pan, Z., George, L., & Wuhrer, R. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.114113 · Cited by 115 · see citing works

Numerical analysis on the thermal performance of a novel PCM-encapsulated porous heat storage Trombe-wall system

Li, W., & Chen, W. (2019) · Solar Energy · doi:10.1016/j.solener.2019.06.052 · Cited by 112 · see citing works

Thermal behavior of a hybrid PCM/plaster: A numerical and experimental investigation

Lachheb, M., Younsi, Z., Naji, H., Karkri, M., & Nasrallah, S. B. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.09.083 · Cited by 109 · see citing works

Use of microencapsulated PCM in buildings and the effect of adding awnings

Arce, P., Castellón, C., Castell, A., & Cabeza, L. F. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.10.028 · Cited by 109 · see citing works

Determination of the PCM melting temperature range using DSC

Jin, X., Xu, X., Zhang, X., & Yin, Y. (2014) · Thermochimica Acta · doi:10.1016/j.tca.2014.09.004 · Cited by 105 · see citing works

Experimental research on a novel energy efficiency roof coupled with PCM and cool materials

Lu, S., Chen, Y., Liu, S., & Kong, X. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.05.080 · Cited by 91 · see citing works

The use of lightweight aggregate saturated with PCM as a temperature stabilizing material for road surfaces

Ryms, M., Lewandowski, W. M., Klugmann-Radziemska, E., Denda, H., & Wcisło, P. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.036 · Cited by 90 · see citing works

Latent heat storage in building elements: A systematic review on properties and contextual performance factors

Mavrigiannaki, A., & Ampatzi, E. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.115 · Cited by 90 · see citing works

Investigation and properties of a novel composite bio-PCM to reduce summer energy consumptions in buildings of hot and dry climates

Boussaba, L., Lefèbvre, G., Makhlouf, S., Grados, A., & Royon, L. (2020) · Solar Energy · doi:10.1016/j.solener.2020.11.060 · Cited by 85 · see citing works

A review of PCM technology for thermal energy storage in the built environment: Part I

Whiffen, T. R., & Riffat, S. (2012) · International Journal of Low-Carbon Technologies · doi:10.1093/ijlct/cts021 · Cited by 84 · see citing works

Thermal stabilization and permanent deformation resistance of LWA/PCM-modified asphalt road surfaces

Ryms, M., Denda, H., & Jaskuła, P. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.050 · Cited by 81 · see citing works

Thermal characterization of full-scale PCM products and numerical simulations, including hysteresis, to evaluate energy impacts in an envelope application

Biswas, K., Shukla, Y., Desjarlais, A. O., & Rawal, R. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.04.090 · Cited by 81 · see citing works

Designing building envelope with PCM wallboards: Design tool development

Bastani, A., Haghighat, F., & Koziński, J. A. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.031 · Cited by 80 · see citing works

Energy saving and CO2 reduction potential of external building walls containing two layers of phase change material

Arıcı, M., Bilgin, F., Krajčík, M., Nižetić, S., & Karabay, H. (2022) · Energy · doi:10.1016/j.energy.2022.124010 · Cited by 78 · see citing works

A work procedure of utilising PCMs as thermal storage systems based on air-TES systems

Iten, M. D. C., & Liu, S. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.10.012 · Cited by 79 · see citing works

Phase change materials: classification, use, phase transitions, and heat transfer enhancement techniques: a comprehensive review

Chebli, F., & Mechighel, F. (2025) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-024-13877-z · Cited by 78 · see citing works

Research on the climate response of variable thermo-physical property building envelopes: A literature review

Xu, L., Dai, L., Yin, L., Sun, X., Xu, W. F., Yang, R. C., Wang, X., & Zhang, Y. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110398 · Cited by 72 · see citing works

Thermal properties of smart microencapsulated paraffin/plaster composites for the thermal regulation of buildings

Karkri, M., Lachheb, M., Albouchi, F., Nasrallah, S. B., & Krupa, I. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.11.068 · Cited by 68 · see citing works

Thermal Energy Storage by the Encapsulation of Phase Change Materials in Building Elements—A Review

Araiza, J. L. R., Pineda-Piñón, J., López-Romero, J. M., Gasca-Tirado, J. R., Contreras, M. A., Jáuregui-Correa, J. C., Apátiga-Castro, L. M., Rivera-Muñoz, E. M., Velazquez-Castillo, R. R., Bueno, J. D. J. P., et al. (2021) · Materials · doi:10.3390/ma14061420 · Cited by 66 · see citing works

Modeling and simulation on the performance of a novel double shape-stabilized phase change materials wallboard

Zhu, N., Liu, P., Hu, P., Liu, F., & Jiang, Z. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.07.051 · Cited by 62 · see citing works

Experimental investigation and performance analysis of a fin tube phase change cold storage unit for high temperature cooling application

Zhai, X. Q., Cheng, X. W., Wang, C., & Wang, R. Z. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.12.021 · Cited by 62 · see citing works

Application of weather forecast in conjunction with price-based method for PCM solar passive buildings – An experimental study

Barzin, R., Chen, J. J. J., Young, B. R., & Farid, M. M. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.11.016 · Cited by 61 · see citing works

Review on Heat Transfer Enhancement of Phase Change Materials (PCMs)

Sivasamy, P., Devaraju, A., & Harikrishnan, S. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2018.03.028 · Cited by 59 · see citing works

Development of gypsum plasterboard embodied with microencapsulated phase change material for energy efficient buildings

Bake, M., Shukla, A., & Liu, S. (2021) · Materials Science for Energy Technologies · doi:10.1016/j.mset.2021.05.001 · Cited by 58 · see citing works

Preparation and characterization of macrocapsules containing microencapsulated PCMs (phase change materials) for thermal energy storage

Han, P., Lu, L., Qiu, X., Tang, Y., & Wang, J. Z. (2015) · Energy · doi:10.1016/j.energy.2015.08.001 · Cited by 56 · see citing works

Adaptability research on phase change materials based technologies in China

Zeng, C., Liu, S., & Shukla, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.117 · Cited by 54 · see citing works

Towards zero energy buildings: A novel passive solar house integrated with flat gravity-assisted heat pipes

Gong, Q., Kou, F., Sun, X., Zou, Y., Mo, J., & Wang, X. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.117981 · Cited by 52 · see citing works

Effectiveness of phase change materials for improving the resiliency of residential buildings to extreme thermal conditions

Baniassadi, A., Sailor, D. J., & Bryan, H. J. (2019) · Solar Energy · doi:10.1016/j.solener.2019.06.011 · Cited by 52 · see citing works

Possibilities and benefits of a new method of modifying conventional building materials with phase-change materials (PCMs)

Ryms, M., & Klugmann-Radziemska, E. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.277 · Cited by 51 · see citing works

Selection of a phase change material and its thickness for application in walls of buildings for solar-assisted steam curing of precast concrete

Yu, N., Chen, C., Mahkamov, K., Han, F., Zhao, C., Lin, J. Q., Jiang, L., & Li, Y. (2020) · Renewable Energy · doi:10.1016/j.renene.2019.12.130 · Cited by 48 · see citing works

Experimental and numerical study of thermal performance of the PCM wall with solar radiation

Xie, J., Wang, W., Sang, P., & Liu, J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.123 · Cited by 47 · see citing works

Numerical simulation and thermal performance of hybrid brick walls embedding a phase change material for passive building applications

Younsi, Z., & Naji, H. (2019) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-08950-x · Cited by 47 · see citing works

Hysteresis effects on the thermal performance of building envelope PCM-walls

Moreles, E., Huelsz, G., & Barrios, G. (2018) · Building Simulation · doi:10.1007/s12273-017-0426-4 · Cited by 45 · see citing works

Preparation, stability and mechanical property of shape-stabilized phase change materials

Wang, Y., Wang, S., Wang, J. P., & Yang, R. C. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.03.036 · Cited by 44 · see citing works

Integrating phase change materials (PCMs) in thermal energy storage systems for buildings

Kuznik, F., Johannes, K., & David, D. (2014) · Elsevier eBooks · doi:10.1533/9781782420965.2.325 · Cited by 43 · see citing works

Experimental study on comprehensive utilization of solar energy and energy balance in an integrated solar house

Chang, H., Liu, Y., Shen, J., Xiang, C., He, S., Wan, Z., Jiang, M., Duan, C., & Shu, S. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.08.061 · Cited by 42 · see citing works

Use of multi-layered PCM gypsums to improve fire response. Physical, thermal and mechanical characterization

Serrano, S., Barreneche, C., Navarro, A., Haurie, L., Fernández, A. I., & Cabeza, L. F. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.05.056 · Cited by 42 · see citing works

Phase change material wall optimization for heating using metamodeling

Kuznik, F., Lopez, J. P. A., Baillis, D. D., & Johannes, K. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.06.021 · Cited by 42 · see citing works

Energy-Efficient Building Envelopes with Phase-Change Materials: New Understanding and Related Research

Cheng, R., Wang, X., & Yinping, Z. (2013) · Heat Transfer Engineering · doi:10.1080/01457632.2013.863674 · Cited by 42 · see citing works

Emerging applications of phase change materials: A concise review of recent advances

Faraji, H., Benkaddour, A., Oudaoui, K., Alami, M. E., & Faraji, M. (2020) · Heat Transfer · doi:10.1002/htj.21938 · Cited by 41 · see citing works

Optimization of DSC measurements for organic phase change materials

Christy, J. V., Balwani, A., Mehling, H., & Agrawal, N. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109032 · Cited by 37 · see citing works

A Method for Thermal Dimensioning and for Energy Behavior Evaluation of a Building Envelope PCM Layer by Using the Characteristic Days

Mazzeo, D., Oliveti, G., & Arcuri, N. (2017) · Energies · doi:10.3390/en10050659 · Cited by 36 · see citing works

Building integrated energy storage opportunities in China

Li, C., & Wang, R. Z. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.06.034 · Cited by 35 · see citing works

Internal surfaces including phase change materials for passive optimal shift of solar heat gain

Arnault, A., Mathieu-Potvin, F., & Gosselin, L. (2010) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2010.06.021 · Cited by 35 · see citing works

The energy saving potential of a new ventilation roof with stabilized phase change material in hot summer region

Yu, J., Qian, C., Yang, Q., Xu, T., Zhao, J., & Xu, X. (2023) · Renewable Energy · doi:10.1016/j.renene.2023.05.012 · Cited by 33 · see citing works

Development and evaluation of gypsum/shape-stabilization phase change materials using large-capacity vacuum impregnator for thermal energy storage

Lee, J., Wi, S., Yun, B. Y., Yang, S., Park, J. H., & Kim, S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.002 · Cited by 33 · see citing works

A simplified dynamic model of double layers shape-stabilized phase change materials wallboards

Zhu, N., Hu, P., & Xu, L. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.08.043 · Cited by 33 · see citing works

Numerical simulation of a phase change material in a spherical capsule with a hollow fin

Meghari, Z., Bouhal, T., Benghoulam, M., Rhafiki, T. E., Khattabi, E. M. E., Doghmi, H., & Mohammed, O. J. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103024 · Cited by 32 · see citing works

Short History of PCM Applications in Building Envelopes

Kośny, J. (2015) · Engineering materials and processes · doi:10.1007/978-3-319-14286-9_2 · Cited by 32 · see citing works

Effect of phase change material wall on natural convection heat transfer inside an air filled enclosure

Labihi, A., Aitlahbib, F., Chehouani, H., Benhamou, B., Ouikhalfan, M., Croitoru, C. V., & Năstase, I. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.112 · Cited by 31 · see citing works

A review of PCM technology for thermal energy storage in the built environment: Part II

Whiffen, T. R., & Riffat, S. (2012) · International Journal of Low-Carbon Technologies · doi:10.1093/ijlct/cts026 · Cited by 31 · see citing works

Mechanical, Thermal, and Fire Properties of Composite Materials Based on Gypsum and PCM

Stejskalová, K., Bujdoš, D., Prochazka, L., Smetana, B., Zlá, S., & Teslík, J. (2022) · Materials · doi:10.3390/ma15031253 · Cited by 28 · see citing works

Impact of the enthalpy function on the simulation of a building with phase change material wall

Kuznik, F., Johannes, K., Franquet, E., Zalewski, L., Gibout, S., Tittelein, P., Dumas, J. P., David, D., Bédécarrats, J.-P., & Lassue, S. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.05.046 · Cited by 29 · see citing works

Study on the properties of a novel shape-stable epoxy resin sealed expanded graphite/paraffin composite PCM and its application in buildings

Ren, X., Shen, H., Yang, Y., & Yang, J. (2019) · Phase Transitions · doi:10.1080/01411594.2019.1610174 · Cited by 28 · see citing works

Applications of organic phase change materials for thermal comfort in buildings

Singh, S. P., & Bhat, V. (2014) · Reviews in Chemical Engineering · doi:10.1515/revce-2014-0015 · Cited by 28 · see citing works

Novel cooling unit using PCM for residential application

Jaber, S., & Ajib, S. (2012) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2012.03.023 · Cited by 26 · see citing works

Energy Savings in Building with a PCM Free Cooling System

Stritih, U., & Butala, V. (2011) · Strojniški vestnik – Journal of Mechanical Engineering · doi:10.5545/sv-jme.2010.066 · Cited by 26 · see citing works

Thermo-optically responsive phase change materials for passive temperature regulation

Mishra, P., Stockmal, K. A., Ardito, G., Tao, M., Dessel, S. V., & Granados-Fócil, S. (2020) · Solar Energy · doi:10.1016/j.solener.2019.12.064 · Cited by 23 · see citing works

Experimental investigation and numerical analysis of energy efficiency building using phase changing material coupled with reflective coating

Shanmuganathan, R., Sekar, M., Praveenkumar, T. R., Pugazhendhi, A., & Brindhadevi, K. (2020) · International Journal of Energy Research · doi:10.1002/er.5783 · Cited by 22 · see citing works

Comprehensive investigations on printability and thermal performance of cementitious material incorporated with PCM under various conditions

Liu, Z., Li, M., Kandasamy, R., Ho, J. Y., Wong, T. N., Li, K. H. H., & Tan, M. J. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115667 · Cited by 22 · see citing works

Thermo-mechanical properties of compaction molded cement-based composite containing a high mass fraction of phase change material for thermal energy storage

Sang, G., Zhang, Y., Fan, M., Du, X., Cui, H., Cui, X., Zhu, Y., & Zhao, Q. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105657 · Cited by 22 · see citing works

Comprehensive examination of thermal energy storage through advanced phase change material integration for optimized building energy management and thermal comfort

Arslan, M., Ghaffar, E., Sohail, A., Pallonetto, F., & Waseem, M. (2025) · Energy and Built Environment · doi:10.1016/j.enbenv.2025.03.003 · Cited by 21 · see citing works

Thermal behaviour of wallboard incorporating a binary mixture as a phase change material

Hamdaoui, S., Mahdaoui, M., Kousksou, T., Afou, Y. E., Msaad, A. A., Arid, A., & Ahachad, M. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100820 · Cited by 21 · see citing works

Mobilized Thermal Energy Storage for Heat Recovery for Distributed Heating

Wang, W. (2010) · Diva portal (Dalarna University Library) · Cited by 21 · see citing works

Ethylene-Propylene Terpolymer-Modified Polyethylene-Based Phase Change Material with Enhanced Mechanical and Thermal Properties for Building Application

Chen, Y., Wu, X., Situ, Y., Liu, J., & Huang, H. M. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b04316 · Cited by 20 · see citing works

Selection and testing of phase change materials in the physical models of buildings for heating and curing of construction elements made of precast concrete

Yu, N., Chen, C., Mahkamov, K., Makhkamova, I., Li, Q., & Ma, J. (2021) · Solar Energy · doi:10.1016/j.solener.2021.08.036 · Cited by 19 · see citing works

Thermal properties of shape-stabilized paraffin used for wallboard

Yan, Q., Li, L., & Shen, D. (2009) · International Journal of Sustainable Energy · doi:10.1080/14786460903440722 · Cited by 19 · see citing works

Novel microencapsulated ternary eutectic alloy-based phase change material

Shimizu, Y., Cho, S., Kawaguchi, T., Tanahashi, K., Dong, K., Nakamura, T., Kurniawan, A., Jeem, M., & Nomura, T. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109535 · Cited by 17 · see citing works

Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings

Xu, X., Zhang, Y., Lin, K., Di, H., & Yang, R. C. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2004.12.016 · Cited by 203 · see citing works

Research on the phase change materials for the passive solar house in Tibet

Zhong, H., Lei, B., & Feng, Y. (2010) · International Conference on Mechanic Automation and Control Engineering · doi:10.1109/mace.2010.5535437 · Cited by 2 · see citing works

Experimental Study on the Thermal Performance of the Shape-Stabilized Phase Change Material Floor Used in Passive Solar Buildings

Zhang, Y., Xu, X., Di, H., Lin, K., & Yang, R. C. (2005) · Journal of Solar Energy Engineering · doi:10.1115/1.2189866 · Cited by 27 · see citing works

Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings

Zhang, Y. P., Lin, K., Yang, R. C., Di, H. F., & Jiang, Y. (2006) · Energy and Buildings · doi:10.1016/j.enbuild.2006.02.009 · Cited by 328 · see citing works

Study on the influence of thermo-physical parameters of phase change material panel on the indoor thermal environment of passive solar buildings in Tibet

Zhang, Y., Sang, G., Li, P., Du, M., Guo, T., Cui, X., Zhang, L., & Han, W. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105019 · Cited by 35 · see citing works