The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Optimization of process variables for biodiesel production by transesterification of flaxseed oil and produced biodiesel characterizations
Abstract
Abstract Optimization of the operating factors to achieve the maximum yield of biodiesel through transesterification reaction was performed by using face-centered central composite design (FCCD) approach of response surface methodology. A total of 29 independent batch experiments were considered in this model to carefully observe the effect of operating factors, such as the volume ratio of methanol/oil, catalyst (KOH) weight percent, reaction temperature, and reaction time. The FCCD model predicted that a maximum yield of 99.5% biodiesel would be achieved from flaxseed oil at a reaction temperature of 59 °C, 0.51% catalyst, the reaction time of 33 min, and a molar ratio of methanol to flaxseed oil of 5.9:1. Experimental verification of the predicted yield under the optimum conditions gave a maximum yield of 98 ± 2%, which is in very good agreement with the predicted value of the model. The physicochemical properties of the flaxseed oil-derived biodiesel were compared with those of standard biodiesel to identify and verify the quality of the produced biodiesel. All observed physicochemical parameters of the flaxseed oil-derived biodiesel were closely in agreement with those of standard biodiesel. Thus, demonstrating that the production of high-quality biodiesel from flaxseed oil is a viable option.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Progress and recent trends in biodiesel fuels
Demirbas, A. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2008.09.001 · Cited by 2,050
Likozar, B., Pohar, A., & Levec, J. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2015.10.035 · Cited by 137
Cited by
Alternative Methods for Biodiesel Cetane Number Valuation: A Technical Note
Mekonnen, K. D., Endris, Y. A., & Abdu, K. Y. (2024) · ACS Omega · doi:10.1021/acsomega.3c09216 · Cited by 57
Metadata
- Authors
- Ahmad, T., Danish, M., Kale, P., Geremew, B., Adeloju, S. B., Nizami, M., & Ayoub, M.
- Venue
- Renewable Energy
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 139
- Pages
- 1272-1280
- ISSN
- 0960-1481 (ISSN-L)
- OpenAlex
- W2921775796
- Cited by
- 169
- References
- 2
- FWCI
- 8.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimization of process variables for biodiesel production by transesterification of flaxseed oil and produced biodiesel characterizations. https://app.cochat.ai/papers/10.1016/j.renene.2019.03.036
- The paper
- Ahmad, T., Danish, M., Kale, P., Geremew, B., Adeloju, S. B., Nizami, M., & Ayoub, M. (2019). Optimization of process variables for biodiesel production by transesterification of flaxseed oil and produced biodiesel characterizations. Renewable Energy. https://doi.org/10.1016/j.renene.2019.03.036
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.