The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Heat transfer enhancement in a flat plate solar collector with different flow path shapes using nanofluid
Abstract
Abstract In the present study, in addition to using nanofluid, the flow direction in a flat plate solar collector is changed to increase the convective heat transfer coefficient. To this end, U-shaped, wavy and spiral pipes with identical pipe lengths on a flat plate collector are simulated. Three-dimensional and steady state equations of continuity, momentum, SST k-ω turbulence model, and energy are solved. Al2O3/water and CuO/water nanofluids are used in volume fractions of 1% and 4%. Results show that using wavy and spiral pipes can significantly increase the heat transfer coefficient and Nusselt number. Also, it is observed that the pressure drop has its highest value for the wavy pipes. In all cases, the heat transfer coefficient increases by using nanofluid instead of water. In all cases except for the CuO 4%, the Nusselt number has decreased due to a remarkable increase in thermal conductivity by adding nanoparticles to water. Results reveal that by using wavy pipes and CuO/water nanofluid with a volume fraction of 4%, the heat transfer coefficient can increase up to 78.25%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two-equation eddy-viscosity turbulence models for engineering applications
Menter, F. R. (1994) · AIAA Journal · doi:10.2514/3.12149 · Cited by 21,593
Fundamentals of heat and mass transfer
Hewitt, G. F. (2008) · Begellhouse eBooks · Cited by 12,932
Solar engineering of thermal processes
(1982) · Solar Energy · doi:10.1016/0038-092x(82)90232-8 · Cited by 9,534
Solar Engineering of Thermal Processes
Duffie, J. A., & Beckman, W. A. (2013) · Wiley eBooks · doi:10.1002/9781118671603 · Cited by 6,387
Zonal Two Equation k-w Turbulence Models For Aerodynamic Flows
Menter, F. (1993) · 23rd Fluid Dynamics, Plasmadynamics, and Lasers Conference · doi:10.2514/6.1993-2906 · Cited by 2,839
Heat transfer in automobile radiators of the tubular type
Dittus, F. W., & Boelter, L. M. K. (1985) · International Communications in Heat and Mass Transfer · doi:10.1016/0735-1933(85)90003-x · Cited by 2,407
Temperature Dependence of Thermal Conductivity Enhancement for Nanofluids
Das, S. K., Putra, N., Thiesen, P., & Roetzel, W. (2003) · Journal of Heat Transfer · doi:10.1115/1.1571080 · Cited by 2,392
Long‐wave radiation from clear skies
Swinbank, W. C. (1963) · Quarterly Journal of the Royal Meteorological Society · doi:10.1002/qj.49708938105 · Cited by 1,631
A new thermal conductivity model for nanofluids
Koo, J., & Kleinstreuer, C. (2004) · Journal of Nanoparticle Research · doi:10.1007/s11051-004-3170-5 · Cited by 1,052
Recent advances in modeling and simulation of nanofluid flows-Part I: Fundamentals and theory
Mahian, O., Kolsi, L., Amani, M., Estellé, P., Ahmadi, G., Kleinstreuer, C., Marshall, J. S., Siavashi, M., Taylor, R. A., Niazmand, H., et al. (2019) · Physics Reports · doi:10.1016/j.physrep.2018.11.004 · Cited by 949
Cited by
An updated review of nanofluids in various heat transfer devices
Okonkwo, E. C., Wole-Osho, I., Almanassra, I. W., Abdullatif, Y. M., & Al-Ansari, T. (2021) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-09760-2 · Cited by 372
Metadata
- Authors
- Saffarian, M. R., Moravej, M., & Doranehgard, M. H.
- Venue
- Renewable Energy
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 146
- Pages
- 2316-2329
- ISSN
- 0960-1481 (ISSN-L)
- OpenAlex
- W2969541435
- Cited by
- 296
- References
- 32
- FWCI
- 24.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Heat transfer enhancement in a flat plate solar collector with different flow path shapes using nanofluid. https://app.cochat.ai/papers/10.1016/j.renene.2019.08.081
- The paper
- Saffarian, M. R., Moravej, M., & Doranehgard, M. H. (2020). Heat transfer enhancement in a flat plate solar collector with different flow path shapes using nanofluid. Renewable Energy. https://doi.org/10.1016/j.renene.2019.08.081
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.