Bio-based refinery intermediate production via hydrodeoxygenation of fast pyrolysis bio-oil
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Pyrolysis bio-oil is unsuitable as transportation fuel due to its chemical composition and high oxygen (>30 wt%) and water (>20 wt%) content rendering the upgrading essential prior any downstream use. The current work investigates the upgrading of a flash pyrolysis bio-oil via mild hydrotreatment (HDT), targeting to a potential intermediate refinery feed. Various operating parameters of HDT were tested, including three temperatures (573, 603 and 633 K), two pressures (4 and 7 MPa) and two H2/bio-oil ratios (506 and 843 NL/L). According to the results, during HDT of bio-oil, massive plugging by coke formed in the reactor. The unsaturated oxygenates in bio-oil are regarded as the predominant coke precursors since they can interact with the catalytic surface. From all the examined conditions, it was found that the longest catalyst life, (5 days on stream), was achieved at 7 MPa pressure, 843 NL/L H2/bio-oil ratio and 603 K temperature. Furthermore, several properties of the initial bio-oil were improved, such as viscosity (156 → 4.9 cSt), carboxylic acids (78 → 0.2 mgKOH/g), density (1.024 → 0.9162 g/ml), and oxygen content (37 → 4 wt%). Conclusively, mild HDT constitutes a promising technological pathway for bio-oil upgrading towards a reliable intermediate refinery feed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D02 Committee (2019) · doi:10.1520/d4052-18a · Cited by 17
Cited by
Figueirêdo, M. B., Hita, I., Deuss, P. J., Venderbosch, R. H., & Heeres, H. J. (2022) · Green Chemistry · doi:10.1039/d2gc00302c · Cited by 146
Digestate Management and Processing Practices: A Review
Kovačić, Đ., Lončarić, Z., Jović, J., Samac, D., Popović, B., & Tišma, M. (2022) · Applied Sciences · doi:10.3390/app12189216 · Cited by 137
Li, S., Wu, Y., Dao, M. U., Dragoi, E.-N., & Xia, C. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.137954 · Cited by 33
Automotive e-Fuels via Hydrocracking of FT-Wax: e-Gasoline and e-Diesel Production
Dimitriadis, A., Chrysikou, L., & Bezergianni, S. (2024) · Energies · doi:10.3390/en17112756 · Cited by 11
Self-citation
Metadata
- Authors
- Dimitriadis, A., Chrysikou, L. P., Meletidis, G., Terzis, G., Auersvald, M., Kubička, D., & Bezergianni, S.
- Venue
- Renewable Energy
- Publisher
- Elsevier BV
- Published
- 2021-05
- Volume
- 168
- Pages
- 593-605
- ISSN
- 0960-1481 (ISSN-L)
- OpenAlex
- W3111999013
- Cited by
- 46
- References
- 1
- FWCI
- 1.33
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.