Recycling of rubber wastes by devulcanization
The DOI matches its Crossref record; 92 of the 96 references it cites were found in a registry or an index.
Abstract
Abstract Disposal of used tires and rubber wastes is one of the biggest challenges of the 21st century waste management. One of the environmentally friendly possibilities of recycling this type of material is to go through the breaking of their three-dimensional structure. This treatment, called the devulcanization, can be defined as a process that causes the selective breakup of the sulfur-sulfur (S-S) and carbon-sulfur (C-S) chemical bonds without breaking the backbone network and without degrading the material. The devulcanized rubber can be mixed with virgin rubber or with other kinds of matrices to give new compounds without generating a significant decrease in mechanical and physical properties. Many devulcanization process types are presented in the literature: chemical, ultrasound, microwave, thermomechanical, etc. The thermomechanical devulcanization based on extrusion seems to be the more suitable to be applied on an industrial scale. The supercritical CO2 has been proposed as a green atmosphere that can be used to improve this type of devulcanization. In fact, it seems that in supercritical conditions, the CO2 swells the rubber and stretches the sulfide links, making them easier to break. This paper presents a literature review on rubbers recycling by devulcanization. It is focused on the different devulcanization techniques used in the last decades. Particular attention is paid to the thermomechanical method, those in the presence of supercritical CO2 and, finally, the combined thermomechanical process with supercritical CO2 atmosphere.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Existing strategies to create reprocessable thermosets have focused on dynamic covalent bond exchange, 3-8 thermomechanical degradation, 9 or wholesale replacement of network components with degradable versions. 10-13”
From Cleavable comonomers enable degradable, recyclable thermoset plastics (2020) · cites this paper as [9]
Citations
Cites
Encyclopedia of Materials: Science and Technology
Buschow, K. H. J., Cahn, R. W., Flemings, M. C., Ilschner, B., Krämer, E. J., & Mahajan, S. K. (2001) · Cited by 1,355
Reclamation and recycling of waste rubber
Adhikari, B. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00020-4 · Cited by 816
Progress in used tyres management in the European Union: A review
Sienkiewicz, M., Kucinska-Lipka, J., Janik, H., & Balas, A. (2012) · Waste Management · doi:10.1016/j.wasman.2012.05.010 · Cited by 559
Waste tire rubber in polymer blends: A review on the evolution, properties and future
Ramarad, S., Khalid, M., Ratnam, C. T., Chuah, A. L., & Rashmi, W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.02.004 · Cited by 527
Ground tyre rubber (GTR) in thermoplastics, thermosets, and rubbers
Karger-Kocsis, J., Mészáros, L., & Bárány, T. (2013) · Journal of Materials Science · doi:10.1007/s10853-012-6564-2 · Cited by 376
Environmentally friendly polymer-rubber composites obtained from waste tyres: A review
Sienkiewicz, M., Janik, H., Borzędowska-Labuda, K., & Kucińska-Lipka, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.121 · Cited by 320
Recycling of waste tire rubber: Microwave devulcanization and incorporation in a thermoset resin
Aoudia, K., Azem, S., Aït Hocine, N., Gratton, M., Pettarin, V., & Seghar, S. (2017) · Waste Management · doi:10.1016/j.wasman.2016.10.051 · Cited by 255
Self-citationThe status of recycling of waste rubber
Fang, Y., Zhan, M., & Wang, Y. (2001) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(00)00052-2 · Cited by 215
Novel Ultrasonic Technology for Devulcanization of Waste Rubbers
Isayev, А. I., Chen, J., & Tukachinsky, A. (1995) · Rubber Chemistry and Technology · doi:10.5254/1.3538741 · Cited by 195
Devulcanization of waste tire rubber by microwaves
de Sousa, F. D. B., Scuracchio, C. H., Hu, G., & Hoppe, S. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.03.008 · Cited by 193
Research works printed but not linked: 7
- Anu Mary, 2016, The current status of sulphur vulcanization and devulcanization chemistry: devulcanization, Rubber Sci., 29, 62
- Fix, 1980, Microwave devulcanization of rubber, Elastomerics, 112, 38
- Meysami, 2014, Continuous devulcanization of scrap EPDM rubber with supercritical CO2: Effect of process parameters ondevulcanized rubber properties, Materials, 1025
- Mouri, 2000, Devulcanization conditions and mechanical properties of re-vulcanized rubber for EPDM. Continuous reclaimation of rubber by shear flow reaction control technology (Part II), Int. Polym. Technol., 27, 23
- Mouri, 2000, A new devulcanization process: continuous reclamation of rubber by shear flow reaction control technology (Part I), Int. Polym. Sci. Technol., 27, 17
- Snyder, R.H., Vincent V.R., Querry F.C. 1977. Paper Presented in the National Tire Disposal Symposium, Washington, DC.
- Suzuki Y., Owaki, M., Mouri, M. et al. 1998. in: Toyota Technical Review 48, 1, 53–57.
Cited by
Cleavable comonomers enable degradable, recyclable thermoset plastics
Shieh, P., Zhang, W., Husted, K. E. L., Kristufek, S. L., Xiong, B., Lundberg, D. J., Lem, J., Veysset, D., Sun, Y., Nelson, K. A., et al. (2020) · Nature · doi:10.1038/s41586-020-2495-2 · Cited by 498
Jubinville, D., Esmizadeh, E., Saikrishnan, S., Tzoganakis, C., & Mekonnen, T. (2020) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2020.e00188 · Cited by 257
Devulcanisation and reclaiming of tires and rubber by physical and chemical processes: A review
Bockstal, L., Berchem, T., Schmetz, Q., & Richel, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.07.049 · Cited by 257
Chang, B. P., Gupta, A., Muthuraj, R., & Mekonnen, T. H. (2021) · Green Chemistry · doi:10.1039/d1gc01115d · Cited by 224
Rubber waste management: A review on methods, mechanism, and prospects
Chittella, H., Yoon, L. W., Ramarad, S., & Lai, Z.-W. (2021) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2021.109761 · Cited by 212
Formela, K. (2021) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2021.06.004 · Cited by 209
Kazemi, M., Faisal Kabir, S., & Fini, E. H. (2021) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2021.105776 · Cited by 221
A review on compatibility between crumb rubber and asphalt binder
Zheng, W., Wang, H., Chen, Y., Ji, J., You, Z., & Zhang, Y. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123820 · Cited by 209
End-of-life options of tyres. A review
Valentini, F., & Pegoretti, A. (2022) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2022.08.006 · Cited by 256
Sustainable mobility: The route of tires through the circular economy model
Araujo-Morera, J., Verdejo, R., López-Manchado, M. A., & Hernández Santana, M. (2021) · Waste Management · doi:10.1016/j.wasman.2021.03.025 · Cited by 159
Thermo-mechanical devulcanization and recycling of rubber industry waste
Seghar, S., Asaro, L., Rolland-Monnet, M., & Aït Hocine, N. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.01.047 · Cited by 162
Self-citationMaterial recovery and recycling of waste tyres-A review
Xiao, Z., Pramanik, A., Basak, A. K., Prakash, C., & Shankar, S. (2022) · Cleaner Materials · doi:10.1016/j.clema.2022.100115 · Cited by 195
Waste tire rubber as low-cost and environmentally-friendly modifier in thermoset polymers – A review
Hejna, A., Korol, J., Przybysz-Romatowska, M., Zedler, Ł., Chmielnicki, B., & Formela, K. (2020) · Waste Management · doi:10.1016/j.wasman.2020.04.032 · Cited by 162
Towards full recyclability of end-of-life tires: Challenges and opportunities
Abbas‐Abadi, M. S., Kusenberg, M., Shirazi, H. M., Goshayeshi, B., & Geem, K. M. V. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.134036 · Cited by 147
Devulcanization Technologies for Recycling of Tire-Derived Rubber: A Review
Wintersteller, R., Markl, E., & Lackner, M. K. (2020) · Materials · doi:10.3390/ma13051246 · Cited by 132
“Truck tires contain more natural rubber than tires for passenger cars, because they are subjected to more mechanical stress, which natural rubber sustains better [14].”
BackgroundMethodInfluentialEnd-of-life tire management: a critical review
Dabić-Miletić, S., Šimić, V., & Karagöz, S. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-16263-6 · Cited by 138
Wiśniewska, P., Wang, S., & Formela, K. (2022) · Waste Management · doi:10.1016/j.wasman.2022.07.002 · Cited by 128
Microwave treatment in waste rubber recycling – recent advances and limitations
Formela, K., Hejna, A., Zedler, L., Colom, X., & Canavate, J. (2019) · Express Polymer Letters · doi:10.3144/expresspolymlett.2019.48 · Cited by 118
Clip Chemistry: Diverse (Bio)(macro)molecular and Material Function through Breaking Covalent Bonds
Shieh, P., Hill, M. R., Zhang, W., Kristufek, S. L., & Johnson, J. A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01282 · Cited by 128
Archibong, F. N., Sanusi, O. M., Médéric, P., & Hocine, N. A. (2021) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2021.105894 · Cited by 104
Zhang, Y., Zhang, Z., Wemyss, A. M., Wan, C., Liu, Y., Song, P., & Wang, S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c02292 · Cited by 101
“2 More than 50% of the waste tires are disposed into landfill and incineration, which has caused serious environmental pollution and hazards to eco-systems, therefore, landfilling has been prohibited by the European Commission and many other countries since 1999.(3) There still lack effective strategies in dealing wit…”
BackgroundWu, W., Jiang, W., Xiao, J., Yuan, D., Wang, T., & Xing, C. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.134488 · Cited by 95
Phiri, M. M., Phiri, M. J., Formela, K., & Hlangothi, S. P. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108429 · Cited by 95
Green Approaches in Rubber Recycling Technologies: Present Status and Future Perspective
Wiśniewska, P., Haponiuk, J. T., Colom, X., & Saeb, M. R. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c01314 · Cited by 92
Current options for characterizing, sorting, and recycling polymeric waste
da Silva, D. J., & Wiebeck, H. (2020) · Progress in Rubber, Plastics and Recycling Technology · doi:10.1177/1477760620918603 · Cited by 81
“Supercritical fluids are frequently utilized as a devulcanization reaction medium and swelling solvent in a two-screw extruder to increase devulcanization rates, typically water and CO2 are fluids used for this purpose.(46,48) In the supercritical state, these substances cannot be liquefied due to pressure changes abo…”
BackgroundFeng, W., Liu, F., Yang, F., Jing, L., Li, L., Li, H., & Chen, L. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121767 · Cited by 92
Gas products generation mechanism during co-pyrolysis of styrene-butadiene rubber and natural rubber
Yang, Q., Yu, S., Zhong, H., Liu, T., Yao, E., Zhang, Y., Zou, H., & Du, W. C. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123302 · Cited by 89
Sustainability in Membrane Technology: Membrane Recycling and Fabrication Using Recycled Waste
Khanzada, N. K., Al-Juboori, R. A., Khatri, M., Ahmed, F. E., Ibrahim, Y., & Hilal, N. (2024) · Membranes · doi:10.3390/membranes14020052 · Cited by 92
“Devulcanization and reclamation serve the dual purpose of safeguarding habitats and conserving the nonrenewable petroleum resources that provide the basic materials for these processes [123,124].”
BackgroundRheological Behaviour of WMA-Modified Asphalt Binders with Crumb Rubber
Turbay, E., Martínez-Argüelles, G., Navarro-Donado, T., Cotte, É. H. S., Polo-Mendoza, R., & Covilla-Valera, E. (2022) · Polymers · doi:10.3390/polym14194148 · Cited by 86
Araujo‐Morera, J., Santana, M. H., Verdejo, R., & López-Manchado, M. Á. (2019) · Polymers · doi:10.3390/polym11122122 · Cited by 85
“More recently, dedicated efforts have been put forth to convert GTR into other added value products with improved performance [1].”
Background4R of rubber waste management: current and outlook
Leong, S.-Y., Lee, S. Y., Koh, T.-Y., & Ang, D. T. (2022) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-022-01554-y · Cited by 83
“(ii) Microwave method This method utilizes the heating effect of the microwave to cleave the crosslinks in the rubber, provided that the rubber is sufficiently polar to absorb the microwave radiation [60].”
MethodLapkovskis, V., Mironovs, V., Касперович, А. В., Myadelets, V., & Goljandin, D. (2020) · Recycling · doi:10.3390/recycling5040032 · Cited by 76
The Road to Sustainable Tire Materials: Current State-of-the-Art and Future Prospectives
Thomas, J., & Patil, R. (2023) · Environmental Science & Technology · doi:10.1021/acs.est.2c07642 · Cited by 69
Zhao, S., Liu, M., Meng, X., Liu, A., & Duo, L. (2024) · Environmental Pollution · doi:10.1016/j.envpol.2024.124291 · Cited by 69
Experimental Investigation of Rubber Swelling in Bitumen
Wang, H., Liu, X., Apostolidis, P., Erkens, S. M. J. G., & Skarpas, A. (2020) · Transportation Research Record Journal of the Transportation Research Board · doi:10.1177/0361198120906423 · Cited by 68
“log αT(T) = −C1(T − TR) C2 + (T − TR) (5)”
BackgroundWaste tires based biorefinery for biofuels and value-added materials production
Rogachuk, B. E., & Okolie, J. A. (2023) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2023.100476 · Cited by 73
Recent advances on waste tires: bibliometric analysis, processes, and waste management approaches
Magagula, S. I., Lebelo, K., Motloung, M. T., Mokhena, T. C., & Mochane, M. J. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-30758-4 · Cited by 69
“In addition, they mainly consist of a variety of reinforcing materials and vulcanized rubber (Asaro et al. 2018) .”
BackgroundMethodAsaro, L., Gratton, M., Poirot, N., Seghar, S., & Hocine, N. A. (2020) · Waste Management · doi:10.1016/j.wasman.2020.09.026 · Cited by 64
Self-citationDas, M., Parathodika, A. R., Maji, P., & Naskar, K. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.111844 · Cited by 64
Hu, Y., Yu, X., Ren, J., Zeng, Z., & Qian, Q. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.173561 · Cited by 66
Dorigato, A., Rigotti, D., & Fredi, G. (2022) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2022.11.003 · Cited by 57
Molecular Reconstruction for the High‐Performance Recycled Fluororubbers
Li, D., Ning, S., Yu, L., Jiang, F., Zhao, D., Zhang, S., Liao, M., Meng, Q., Fang, Q., Kang, H., et al. (2025) · Advanced Materials · doi:10.1002/adma.202501622 · Cited by 57
Uriarte-Miranda, M.-L., Caballero‐Morales, S., Flores, J. L. M., Cano‐Olivos, P., & Akulova, A. A. (2018) · Sustainability · doi:10.3390/su10103398 · Cited by 56
“[22,23] 2017–2018 Resources, Conservation & Recycling—Waste Management Process Study on the processing of recycled tire waste to be used as polymer modifier to improve strength of epoxy based composites.”
BackgroundMethodPyrolytic transformation behavior of hydrocarbons and heteroatom compounds of scrap tire volatiles
Pan, Y., Yang, D., Sun, K., Wang, X., Zhou, Y., & Huang, Q. (2020) · Fuel · doi:10.1016/j.fuel.2020.118095 · Cited by 57
Аржакова, О. В., Arzhakov, M. S., Badamshina, E. R., Bryuzgina, E. B., Bryuzgin, E. V., Bystrova, A. V., Vaganov, G., Vasilevskaya, V. V., Vdovichenko, A. Y., Gallyamov, M. O., et al. (2022) · Russian Chemical Reviews · doi:10.57634/rcr5062 · Cited by 60
Paiva, C. Z., Peruchi, R. S., Fim, F. D. C., Soares, W. D. O. S., & da Silva, L. B. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128352 · Cited by 55
Luna, C. B. B., Araújo, E. M., Siqueira, D. D., Morais, D. D. D. S., Filho, E. A. D. S., & Fook, M. V. L. (2019) · Journal of Elastomers & Plastics · doi:10.1177/0095244318819213 · Cited by 53
“8 Journal of Elastomers & Plastics 52(1)”
BackgroundMethodInfluentialExperimental Validation of the Horikx Theory to be Used in the Rubber Devulcanization Analysis
Seghar, S., Asaro, L., & Hocine, N. A. (2019) · Journal of Polymers and the Environment · doi:10.1007/s10924-019-01513-z · Cited by 52
Self-citationMethods for improving storage stability of rubber bitumen: A review
Yang, X., Ning, Z., Feng, X., He, X., & Tan, S. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.141595 · Cited by 51
Review of dynamic behaviour of rubberised concrete at material and member levels
Xiong, Z., Fang, Z., Feng, W., Liu, F., Yang, F., & Li, L. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102237 · Cited by 51
Devulcanization of Waste Rubber and Generation of Active Sites for Silica Reinforcement
Ghorai, S., Mondal, D., Hait, S., Ghosh, A. K., Wießner, S., Das, A., & De, D. (2019) · ACS Omega · doi:10.1021/acsomega.9b01424 · Cited by 50
Advances in recycling of waste vulcanized rubber products via different sustainable approaches
Kumar, A., Dhanorkar, R. J., Mohanty, S., & Gupta, V. K. (2024) · Materials Advances · doi:10.1039/d4ma00379a · Cited by 50
Goevert, D. (2024) · Frontiers in Sustainability · doi:10.3389/frsus.2023.1282805 · Cited by 48
Abdullah, M., & Abedin, M. Z. (2024) · Results in Surfaces and Interfaces · doi:10.1016/j.rsurfi.2024.100221 · Cited by 57
Guo, L., Wang, C., Lv, D., Ren, D., Zhai, T., Sun, C., & Liu, H. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123266 · Cited by 45
Effective devulcanization of ground tire rubber using choline chloride-based deep eutectic solvents
Saputra, R., Walvekar, R., Khalid, M., Shahbaz, K., & Ramarad, S. (2019) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2019.103151 · Cited by 44
Effective incineration of fuel-waste slurries from several related industries
Nyashina, G. S., Vershinina, K. Y., Shlegel, N. E., & Strizhak, P. A. (2019) · Environmental Research · doi:10.1016/j.envres.2019.108559 · Cited by 44
Preparation and application of rubber modified emulsified asphalt
Zheng, Y., Han, S., Zhang, C., Luo, Y., & Men, C. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.134540 · Cited by 43
Zedler, Ł., Klein, M., Saeb, M. R., Colom, X., Cañavate, J., & Formela, K. (2018) · Polymers · doi:10.3390/polym10111265 · Cited by 43
“Therefore, searching for new and pro-ecological reutilization methods of used tires and other waste rubbers is one of the biggest challenges of the 21st century waste management [4].”
BackgroundPost-consumer tires as a valuable resource: review of different types of material recovery
Battista, M., Gobetti, A., Agnelli, S., & Ramorino, G. (2020) · Environmental Technology Reviews · doi:10.1080/21622515.2020.1861109 · Cited by 43
Devulcanization of Waste Tire Rubber via Microwave and Biological Methods: A Review
Vahdatbin, M., Hajikarimi, P., & Fini, E. H. (2025) · Polymers · doi:10.3390/polym17030285 · Cited by 41
Devulcanization of natural rubber vulcanizates by Bacillus cereus TISTR 2651
Kaewpetch, B., Prasongsuk, S., & Poompradub, S. (2019) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2019.76 · Cited by 41
“Due to the difficulty of subsequent solvent removal and prevention of exposure to toxic chemicals [12, 15, 16], the advanced technique of using a non-toxic supercritical fluid (carbon dioxide, methane and water) has been applied instead, but this approach requires a high cost and energy consumption [4, 12, 17, 18].”
BackgroundHassan, A. A., Zhang, Z., Formela, K., & Wang, S. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.108991 · Cited by 41
An experimental study on a novel reclaimed rubber compound for fiber-reinforced seismic isolators
Cilento, F., Losanno, D., & Piga, L. (2022) · Structures · doi:10.1016/j.istruc.2022.09.009 · Cited by 44
Bowles, A., Nievas, Á., & Fowler, G. D. (2023) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2023.100972 · Cited by 45
“Due to their heterogeneity, complexity, and the thermodynamic characteristics of vulcanisation, waste tyres are challenging to recycle using depolymerisation techniques such as devulcanisation (Asaro et al., 2018; Sabzekar et al., 2015).”
Preliminary Investigation on Auto-Thermal Extrusion of Ground Tire Rubber
Zedler, Ł., Kowalkowska‐Zedler, D., Vahabi, H., Saeb, M. R., Colom, X., Cañavate, J., Wang, S., & Formela, K. (2019) · Materials · doi:10.3390/ma12132090 · Cited by 40
Cataldo, F. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24032623 · Cited by 40
Experimental methods in chemical engineering: Reactive extrusion
Zhuang, Y., Saadatkhah, N., Morgani, M. S., Xu, T., Martin, C., Patience, G. S., & Ajji, A. (2022) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.24538 · Cited by 39
High scission of butadiene rubber vulcanizate under thermo-oxidation
Xie, Y., Hassan, A. A., Song, P., Zhang, Z., & Wang, S. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.07.015 · Cited by 39
Candau, N., Oğuz, O., Federico, C. E., Stoclet, G., Tahon, J., & Maspoch, M. L. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107313 · Cited by 39
“Wastes rubber mostly originate from tires [7].”
Novel uses of recycled rubber in civil applications
Rigotti, D., & Dorigato, A. (2022) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2022.08.005 · Cited by 39
Hu, H., Liu, J., Zhu, Q., & Chen, Q. (2020) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2020.105214 · Cited by 38
Suescún, Ó. Y. B., & Britto, R. A. (2020) · Iranian Polymer Journal · doi:10.1007/s13726-020-00818-4 · Cited by 37
Zedler, Ł., Wang, S., & Formela, K. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155636 · Cited by 37
High-value recycling of waste tire rubber powder by wet mixing method
Hao, K., Wang, W., Guo, X., Liu, F., Xu, Y., Guo, S., Bai, L., Liu, G., Liu, M., Guo, L., et al. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.135592 · Cited by 36
Comparative analysis of waste tyre treatment technologies: Environmental and economic perspectives
Kumar, D., Yang, P., Han, B., Khoo, S., Norton, M., Adams, S. D., & Kouzani, A. Z. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115691 · Cited by 39
Warm asphalt rubber: A sustainable way for waste tire rubber recycling
Yu, H., Deng, G., Wang, D., Zhang, Z., & Oeser, M. (2020) · Journal of Central South University · doi:10.1007/s11771-020-4467-y · Cited by 36
“On the other hand, tire rubber is composed of precious polymer like nature rubber and synthetic rubber [55].”
BackgroundGumede, J. I., Hlangothi, B. G., Woolard, C. D., & Hlangothi, S. P. (2021) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x211008515 · Cited by 39
“Several researchers (Asaro et al., 2018; Bockstal et al., 2019; Mangili et al., 2015; Ramarad et al., 2015; Sabzekar et al., 2015; Seghar et al., 2019; Yao et al., 2013; Zhang et al., 2018) have extensively studied and discussed these methods; Table 3 shows their comprehensive summary.”
BackgroundMethodResultInfluentialSimulating vulcanization process during tire production to explore sulfur migration during pyrolysis
Sun, B., Li, J., Li, X., Lin, F., Che, L., Tian, W., Yan, B., & Chen, G. (2022) · Fuel · doi:10.1016/j.fuel.2022.125665 · Cited by 37
Properties and interaction evolution mechanism of CR modified asphalt
Zhang, Y., Deng, X., Xiao, P., Qian, P., Zhang, Y., & Kang, A. (2024) · Fuel · doi:10.1016/j.fuel.2024.131886 · Cited by 35
Zhou, Y., Xu, G., Leng, Z., Kong, P., Wang, H., Yang, J., Qiu, W., Xu, Z., & Chen, X. (2022) · Physics and Chemistry of the Earth Parts A/B/C · doi:10.1016/j.pce.2022.103332 · Cited by 35
Singh, P., Singh, D. N., & Debbarma, S. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.130807 · Cited by 35
Cradle-to-cradle approach to waste tyres and development of silica based green tyre composites
Ghosh, J., Hait, S., Ghorai, S., Mondal, D., Wießner, S., Das, A., & De, D. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.104629 · Cited by 35
Zhang, Z., Li, J., Wan, C., Zhang, Y., & Wang, S. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c08867 · Cited by 34
Zedler, Ł., Kowalkowska‐Zedler, D., Colom, X., Cañavate, J., Saeb, M. R., & Formela, K. (2020) · Polymers · doi:10.3390/polym12123018 · Cited by 33
Kosmela, P., Olszewski, A., Zedler, Ł., Burger, P., Piasecki, A., Formela, K., & Hejna, A. (2021) · Materials · doi:10.3390/ma14143807 · Cited by 34
Utrera-Barrios, S. I., Ricciardi, O., González, S., Verdejo, R., López-Manchado, M. Á., & Santana, M. H. (2022) · Polymers · doi:10.3390/polym14214607 · Cited by 33
A facile approach from waste to resource: Reclaimed rubber-derived membrane for dye removal
Lin, Y., Kao, F.-Y., Chen, S., Wey, M., & Tseng, H. (2020) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2020.06.004 · Cited by 32
Gallos, A., Crowet, J., Michely, L., Raghuwanshi, V. S., Mention, M. M., Langlois, V., Dauchez, M., Garnier, G., & Allais, F. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.1c00002 · Cited by 34
Abdullah, Z. T. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.102229 · Cited by 32
Thermo-oxidative degradation behavior of natural rubber vulcanized by different curing systems
Ren, T., Wan, C., Song, P., Rodrigue, D., Zhang, Y., & Wang, S. (2024) · Chemical Engineering Science · doi:10.1016/j.ces.2024.120147 · Cited by 31
Salimi, A., Abbassi‐Sourki, F., Karrabi, M., & Ghoreishy, M. H. R. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106989 · Cited by 31
Review and Perspectives of End-of-Life Tires Applications for Fuel and Products
Kazemi, M., Zarmehr, S. P., Yazdani, H., & Fini, E. H. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00459 · Cited by 31
Self-healing and recyclable elastomer based on epoxidized natural rubber and carboxylated-chitosan
Han, H., Zhang, X., Kuang, W., Tian, H., & Wang, X. (2023) · Composites Communications · doi:10.1016/j.coco.2023.101594 · Cited by 30
Progress in devulcanization of waste tire rubber: Upcycling towards a circular economy
Haq, Z. U., Ren, T., Yue, X., Formela, K., Rodrigue, D., Colom, X., McNally, T., Dawei, D., Zhang, Y., & Wang, S. (2025) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2025.20 · Cited by 32
Sustainable Asphalt Rejuvenation by Using Waste Tire Rubber Mixed with Waste Oils
Aljarmouzi, A., & Dong, R. (2022) · Sustainability · doi:10.3390/su14148246 · Cited by 30
Pyrolysis of vulcanized styrene-butadiene rubber via ReaxFF molecular dynamics simulation
Wang, Y., Yao, S., Wang, W., Qiu, C., Zhang, J., Deng, S., Dong, H., Wu, C., & Wang, J. (2020) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2020.10.033 · Cited by 31
Stage-aging characteristics and stages division of crumb rubber modified asphalt binder
Chen, R., Zhu, H., Kong, L., Xu, Y., & Ou, L. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129712 · Cited by 29
Zhou, Y., Xu, G., Wang, H., Chen, X., Fan, Y., Yang, J., Leng, Z., & Huang, W. (2023) · Road Materials and Pavement Design · doi:10.1080/14680629.2023.2287714 · Cited by 29
“It has been estimated that over 1 billion tons of waste tires are produced worldwide annually due to the rapid development of the automotive industry, the management of which has always been a problem for mankind (Asaro et al., 2018; Farina et al., 2017).”
Recent advances in sustainable degradation processes of elastomers: a comprehensive review
Burelo, M., Gaytán, I., Gutiérrez, S., Cruz‐Morales, J. A., Treviño‐Quintanilla, C. D., Stringer, T., & Ramírez-Melgarejo, M. (2025) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-025-09724-8 · Cited by 30
“C and C=C), leading to the decline of the material’s physical, mechanical, and thermal properties, to the point where it can no longer be recycled to produce new elastomeric products (Asaro et al. 2018).”
Influential
Metadata
- Authors
- Asaro, L., Gratton, M., Seghar, S., & Aït Hocine, N.
- Affiliations
- Université d'Orléans (FR)
- PHENIX laboratory (FR)
- ORCID
- Gratton, Michel
- Venue
- Resources, Conservation and Recycling
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 133
- Pages
- 250-262
- ISSN
- 0921-3449 (ISSN-L)
- OpenAlex
- W2789999880
- Cited by
- 328
- References
- 96
- Citations by year
- 2026: 33 · 2025: 49 · 2024: 50 · 2023: 41 · 2022: 47 · 2021: 41 · 2020: 36 · 2019: 24 · 2018: 7
- FWCI
- 13.47
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Resources Conservation and Recycling (publishedVersion)
- HAL (submittedVersion)
- Funders
- “la Région Centre Val de Loire, France”
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Environmental Science › Waste Management and Disposal › Recycling and Waste Management Techniques
- Physical Sciences › Engineering › Building and Construction › Recycling and utilization of industrial and municipal waste in materials production
- Keywords
- rubber recycling, devulcanization, used tires, supercritical carbon dioxide, extrusion
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.