The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index; 14 of the 32 sources its claims cite were checked for support.
Cleavable comonomers enable degradable, recyclable thermoset plastics
Open accessAbstract
Thermosets—polymeric materials that adopt a permanent shape upon curing—have a key role in the modern plastics and rubber industries, comprising about 20 per cent of polymeric materials manufactured today, with a worldwide annual production of about 65 million tons1,2. The high density of crosslinks that gives thermosets their useful properties (for example, chemical and thermal resistance and tensile strength) comes at the expense of degradability and recyclability. Here, using the industrial thermoset polydicyclopentadiene as a model system, we show that when a small number of cleavable bonds are selectively installed within the strands of thermosets using a comonomer additive in otherwise traditional curing workflows, the resulting materials can display the same mechanical properties as the native material, but they can undergo triggered, mild degradation to yield soluble, recyclable products of controlled size and functionality. By contrast, installation of cleavable crosslinks, even at much higher loadings, does not produce degradable materials. These findings reveal that optimization of the cleavable bond location can be used as a design principle to achieve controlled thermoset degradation. Moreover, we introduce a class of recyclable thermosets poised for rapid deployment. A method of endowing thermoset plastics with a degree of recyclability and reprocessability by incorporating cleavable chemical linkages in the strands of the polymer, rather than in the crosslinks, is presented.
Overview
CoChat Summary
TL;DR
Installing a small number of cleavable silyl-ether bonds within the strands of polydicyclopentadiene (pDCPD), rather than in the crosslinks, yields thermosets that retain native mechanical and ballistic properties but can be triggered to degrade into soluble, recyclable fragments. The work establishes cleavable-bond location as a design principle for controlled thermoset degradation and introduces a recyclable thermoset platform.
Key findings
- iPrSi-doped pDCPD degraded in TBAF: 10% and 15% v/v iPrSi samples dissolved after 12 h, while native pDCPD remained intact; 5% iPrSi swelled but did not dissolve. In contrast, SiXL-doped pDCPD with cleavable crosslinks remained intact even at 80% v/v SiXL loading.
- Low iPrSi loadings preserved properties: 10% and 20% iPrSi-doped samples showed nearly identical Young’s moduli and elongations at break to native pDCPD; T_g decreased from 166 °C for native pDCPD to 138 °C for 10% iPrSi. LIPIT showed 10% iPrSi-doped films stopped steel microparticles with the same efficiency as native pDCPD.
- Degradation product size was tunable: GPC weight-average molar masses ranged from 2–8 kDa, and DOSY estimated ~4 nm average diameter for products from 10% iPrSi-doped material. Recycled samples made from 25 wt.% degradation products plus DCPD showed comparable stress-strain behavior and elastic moduli to native pDCPD, and carbon fiber was quantitatively recovered from composites.
- Weathering in synthetic seawater under UV for 16 d produced up to ~2–3-fold increases in degradation relative to native pDCPD, with TEM showing sub-5-nm particles.
Methods
- A reverse gel-point model based on Miller-Macosko and Flory-Stockmayer theories estimated the cleavable comonomer amount needed for degradation; for f >> c, degradation is expected when x > ~2c, while for f ≈ c, x ~ c.
- pDCPD samples were prepared by mixing DCPD with iPrSi (0, 5, 10, or 15% v/v; also 2.5, 7.5, 20, 33, 50% in some experiments) or SiXL (up to 80% v/v), curing with Grubbs 2nd generation ROMP initiator at 120 °C. Degradation was triggered with TBAF, HF, aqueous acid/base, or synthetic seawater/UV.
- Characterization included tensile testing, DMA, nanoindentation, TGA, oscillatory rheology, ICP-OES, GPC, DOSY, 1-D/2-D NMR, TEM, LIPIT, TOC analysis, and preliminary techno-economic analysis. Recycling used degradation fragments from 10% iPrSi-doped pDCPD mixed with DCPD and re-cured.
Limitations
- The paper states the theoretical model assumes randomly distributed cleavable bonds, equal and independent reactivity of equivalent functional groups, and no intramolecular reactions; it only estimates x, and loops that consume functionality without contributing to gelation would lower the number of degradable bonds needed.
- The paper notes the curing protocol was not further optimized, and iPrSi-doped pDCPD showed sluggish hydrolysis in aqueous acidic (pH 0) or basic (pH 14) conditions due to hydrophobicity, though surface etching occurred after 30 min in aqueous NaOH.
- The paper describes the techno-economic analysis as preliminary and the weathering study as 16 d in synthetic seawater/UV; it also notes concern about microplastic generation, though observed sub-5-nm particles may be intermediates. Evident from the text: some tensile measurements had small n (n = 1 for 50% iPrSi), and long-term environmental fate or full composite recycling performance is not established.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
6 Valid · 2 Not valid · 4 Not checked · 72 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“This insight into the structure of pDCPD, uniquely enabled by the cleavable comonomer approach, lends clear and quantitative support to the model of pDCPD as being crosslinked by secondary metathesis reactions of cyclopentene substituents. 35”
What the sources say
- Disputedcites [35] Chen, J., Burns, F. P., Moffitt, M. G. & Wulff, J. E. Thermally crosslinked functionalized polydicyclopentadiene with a high Tg and tunable surface energy. ACS Omega 1, 532–540 (2016). sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) acknowledges a model in which both alkenes undergo metathesis, but says that model is often not representative of the crosslink structure. It instead describes subsequent crosslinking as thermal, probably radical, condensation of the remaining olefins. The paper does not report a cleavable-comonomer approach providing quantitative support for secondary metathesis crosslinking. (LLM, conf=0.89)
Checked by a reasoning model — may be wrong.
boostedstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“the presence of loops that consume functionality yet do not contribute to gelation will further lower the number of degradable bonds needed to achieve degradation (vide infra). 26”
What the sources say
- Partly supportedcites [26] Wang, J. et al. Counting loops in sidechain-crosslinked polymers from elastic solids to single-chain nanoparticles. Chem. Sci. 10, 5332–5337 (2019). sourceExperimental — accuracy not yet measured
The discussion of gelation (page unavailable) reports that materials with loop fractions above approximately 0.7 were soluble, supporting the point that loops can consume reacted functionality without building a gel-spanning network. The paper uses cleavable groups to measure loops, but it does not establish that loops lower the number of degradable bonds needed to degrade a network. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 6 assumptions not shown here.
- Partly supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“High-speed imaging revealed that films of 10% iPrSi -doped material stopped projectiles with the same efficiency as native pDCPD (Fig. 3g, Figs. S14-S17, Table S2, S3).”
What the sources say
- Could not verifycites [29] Veysset, D. et al. Dynamics of supersonic microparticle impact on elastomers revealed by real-time multi-frame imaging. Sci. Rep. 6, 25577 (2016); corrigendum 8, 46944 (2018). sourceExperimental — accuracy not yet measured
The Results describe high-speed imaging of impacts on PUU1000, PUU2000, and PDMS, not a comparison between 10% iPrSi-doped material and native pDCPD. Searches for those materials and equal projectile-stopping efficiency found no passage addressing the claim in our copy. (LLM, conf=0.77)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“These materials displayed enhanced degradation under mixed aqueous/organic acidic conditions (Extended Data Fig. 5).”
What the sources say
- Partly supportedcites [17] Shieh, P., Nguyen, H. V. T. & Johnson, J. A. Tailored silyl ether monomers enable backbone-degradable polynorbornene-based linear, bottlebrush and star copolymers through ROMP. Nat. Chem. 11, 1124–1132 (2019). sourceExperimental — accuracy not yet measured
The Results section (‘Design of Bifunctional Silyl Ether Monomers,’ page unavailable) reports that a silyl-ether copolymer degraded in acidic dioxane/water while its control did not. Our copy does not report this result for 10% v/v EtSi-doped pDCPD; searches for pDCPD and that loading found no matching passage. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The coefficient of restitution (CoR), defined as the ratio of rebound velocity to impact velocity, was similar for these materials across impact velocity regimes of particle rebound, embedment, and film perforation (Fig. 3h), indicating indistinguishable high strain-rate responses.”
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
47 more claims
Create a free account to see all 84 claims and every source verdict.
- Probably not a substantial claim. 10
- It may state two separate claims as one. 19
- The quote only partly states this claim. 4
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Characterization and Reprocessing of Products
“When carbon fiber fabrics were embedded into 10% iPrSi -doped pDCPD, they could be quantitatively recovered (Fig. 4i).”
§ References
“h. Images of carbon fiber recovery from 10% iPrSi -doped pDCPD composites.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Characterization and Reprocessing of Products
“Raman spectra for pristine versus recovered carbon fiber were very similar, suggesting that the mild pDCPD degradation process has no impact on the fiber composition (Fig. 4j).”
§ References
“i. Raman spectra of pristine and recovered carbon fibers, suggesting no chemical damage to the carbon fiber material.”
Citations
Cites
Microplastics as contaminants in the marine environment: A review
Cole, M., Lindeque, P., Halsband, C., & Galloway, T. S. (2011) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2011.09.025 · Cited by 6,023
Silica-Like Malleable Materials from Permanent Organic Networks
Montarnal, D., Capelot, M., Tournilhac, F., & Leibler, L. (2011) · Science · doi:10.1126/science.1212648 · Cited by 3,625
An engineered PET depolymerase to break down and recycle plastic bottles
Tournier, V., Topham, C. M., Gilles, A., David, B., Folgoas, C., Moya-Leclair, E., Kamionka, E., Desrousseaux, M.-L., Texier, H., Gavalda, S., et al. (2020) · Nature · doi:10.1038/s41586-020-2149-4 · Cited by 2,176
Molecular Size Distribution in Three Dimensional Polymers. I. Gelation 1
Flory, P. J. (1941) · Journal of the American Chemical Society · doi:10.1021/ja01856a061 · Cited by 1,873 · cited 1×
“To estimate the amount of cleavable comonomer x required to degrade networks of strands with f crosslinkable functional groups and c crosslinks into soluble products, we derived a reverse gel-point model based on Miller-Macosko 23 and Flory-Stockmayer 24,25 theories (Fig.”
High-performance vitrimers from commodity thermoplastics through dioxaborolane metathesis
Röttger, M., Domenech, T., van der Weegen, R., Breuillac, A., Nicolaÿ, R., & Leibler, L. (2017) · Science · doi:10.1126/science.aah5281 · Cited by 1,394
Covalent Adaptable Networks (CANs): A Unique Paradigm in Cross-Linked Polymers
Kloxin, C. J., Scott, T. F., Adzima, B. J., & Bowman, C. N. (2010) · Macromolecules · doi:10.1021/ma902596s · Cited by 1,175
Stockmayer, W. H. (1944) · The Journal of Chemical Physics · doi:10.1063/1.1723922 · Cited by 946
Mechanically Activated, Catalyst-Free Polyhydroxyurethane Vitrimers
Fortman, D. J., Brutman, J. P., Cramer, C. J., Hillmyer, M. A., & Dichtel, W. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08084 · Cited by 811
Dynamic covalent chemistry in polymer networks: a mechanistic perspective
Winne, J. M., Leibler, L., & Du Prez, F. E. (2019) · Polymer Chemistry · doi:10.1039/c9py01260e · Cited by 736
A New Derivation of Average Molecular Weights of Nonlinear Polymers
Macosko, C. W., & Miller, D. R. (1976) · Macromolecules · doi:10.1021/ma60050a003 · Cited by 691
Cited by
New Advances in Covalent Network Polymers via Dynamic Covalent Chemistry
Lei, Z., Chen, H., Huang, S., Wayment, L. J., Xu, Q., & Zhang, W. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00926 · Cited by 372
Self-citationRecent advances in polymers and polymer composites for food packaging
Zhang, M., Biesold, G. M., Choi, W., Yu, J., Deng, Y., Silvestre, C., & Lin, Z. (2022) · Materials Today · doi:10.1016/j.mattod.2022.01.022 · Cited by 335
Upcycling and catalytic degradation of plastic wastes
Hou, Q., Zhen, M., Qian, H., Nie, Y., Bai, X., Xia, T., Laiq Ur Rehman, M., Li, Q., & Ju, M. (2021) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2021.100514 · Cited by 335
Upcycling to Sustainably Reuse Plastics
Zhao, X., Boruah, B., Chin, K. F., Đokić, M., Modak, J. M., & Soo, H. S. (2022) · Advanced Materials · doi:10.1002/adma.202100843 · Cited by 301
Closed-loop chemical recycling of thermosetting polymers and their applications: a review
Liu, Y., Yu, Z., Wang, B., Li, P., Zhu, J., & Ma, S. (2022) · Green Chemistry · doi:10.1039/d2gc00368f · Cited by 278
Metadata
- Authors
- Shieh, P., Zhang, W., Husted, K. E. L., Kristufek, S. L., Xiong, B., Lundberg, D. J., Lem, J., Veysset, D., Sun, Y., Nelson, K. A., Plata, D. L., & Johnson, J. A.
- Affiliations
- Massachusetts Institute of Technology (US)
- Institute for Soldier Nanotechnologies (US)
- Corresponding author
- Johnson, Jeremiah A.
- ORCID
- Venue
- Nature
- Published
- 2020-07-22
- Volume
- 583
- Issue
- 7817
- Pages
- 542-547
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- PMC
- PMC7384294
- OpenAlex
- W3045151714
- Semantic Scholar
- fddc85352759d6354b632ad11c85812c1b091d91
- Cited by
- 498
- References
- 41
- Citations by year
- 2026: 55 · 2025: 101 · 2024: 93 · 2023: 96 · 2022: 89 · 2021: 53 · 2020: 11
- FWCI
- 23.62
- Type
- journal article
- Language
- en
- Update notices
- correction (2020-08-20)
- Open access
- green
- europepmc.org
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature (publishedVersion)
- PubMed (publishedVersion)
- Europe PMC (PubMed Central) (acceptedVersion)
- PubMed Central (acceptedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Funders
- National Cancer Institute (R01CA220468)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Materials Science › Polymers and Plastics › Epoxy Resin Curing Processes
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Keywords
- thermosetting plastics, polydicyclopentadiene, degradable polymers, recyclable polymers, controlled degradation, crosslinking, reprocessability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cleavable comonomers enable degradable, recyclable thermoset plastics. https://app.cochat.ai/papers/10.1038/s41586-020-2495-2
- The paper
- Shieh, P., Zhang, W., Husted, K. E. L., Kristufek, S. L., Xiong, B., Lundberg, D. J., Lem, J., Veysset, D., Sun, Y., Nelson, K. A., Plata, D. L., & Johnson, J. A. (2020). Cleavable comonomers enable degradable, recyclable thermoset plastics. Nature. https://doi.org/10.1038/s41586-020-2495-2
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.