The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Numerical approaches and comprehensive models for gasification process: A review
Abstract
Abstract Nowadays, gasification is seen as a worldwide settled technique for sustainably generating energy from residues. Its final product is a synthetic gas which may be used for several purposes such as fueling engines, industry and the transport sector. This technique involves several complex reactions, different thermodynamic regimes and environments, and may be held under a myriad of operational conditions. Thus, simulation tools have become very useful to predict the optimal parameters to be applied and the heating content of the final product, therefore producing the most suitable syngas for the desired utilizations. Computational fluid dynamics (CFD) reduces the time needed to design and implement each gasification experiment, using mathematical approaches and developing specific codes regarding the type of feedstock, reactor utilized and expected atmosphere. This paper reviewed the major works on numerical methods for gasification and co-gasification of feedstocks, such as biomass, waste and fossil fuels, published in the last two decades. A thorough explanation of the solid and gaseous phases, their interconnections and behavior was presented, while relating the characteristics of the main methods to the final product obtained. Major trends were identified as well as some suggestions regarding future perspectives were done. Kinetic, thermodynamic and computational fluid dynamic models were seen to be preferred concerning the study of syngas production from distinct types of feedstocks. Also, biomass and coal were the most frequently used feedstocks, with 37% and 24% of the total share, respectively. Relative to the gasifier type, fluidized beds were used in almost 50% of the assessments, followed by entrained beds, mostly used for coal gasification. Only major trends could be identified for some of the experimental conditions applied, due to the high variances seen for different feedstocks or reactor features. This review supports the need to continue developing new models and adapting the existing ones in order to reach broader conclusions, since distinct parameters afford completely different outcomes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of waste tyre gasification
Oboirien, B. O., & North, B. C. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.09.057 · Cited by 133
Tabata, T. (2013) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x13502385 · Cited by 57
Cited by
Municipal solid waste as a sustainable resource for energy production: State-of-the-art review
Shah, A. V., Srivastava, V. K., Mohanty, S. S., & Varjani, S. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105717 · Cited by 288
Review and implementation of CFD-DEM applied to chemical process systems
Golshan, S., Sotudeh-Gharebagh, R., Zarghami, R., Mostoufi, N., Blais, B., & Kuipers, J. A. M. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115646 · Cited by 270
Machine learning methods for modelling the gasification and pyrolysis of biomass and waste
Ascher, S., Watson, I., & You, S. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111902 · Cited by 267
Ramos, A., Monteiro, E., & Rouboa, A. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.116271 · Cited by 214
Self-citationKululo, W. W., Habtu, N. G., Abera, M. K., Sendekie, Z. B., Fanta, S. W., & Yemata, T. A. (2025) · Green Energy and Technology · doi:10.1007/978-3-031-81730-4_15 · Cited by 3
Metadata
- Authors
- Ramos, A., Monteiro, E., & Rouboa, A.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 110
- Pages
- 188-206
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W2943260003
- Cited by
- 191
- References
- 2
- FWCI
- 6.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.