The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Pyrolysis of cellulose: Evolution of functionalities and structure of bio-char versus temperature
Abstract
The pyrolysis of cellulose at 200–800 °C with an increment of 50 °C was conducted in this study, aiming to understand impacts of temperature on evolution of the of organics and the structures of bio-char. Extensively pyrolysis of cellulose to bio-oil initiated at 300 °C, reached maximum at 450 °C, and shifted to gasification to produce gases as the main products above 650 °C. Dehydrate sugars were the initial products formed below 350 °C, which soon dehydrated to form furans at ca. 400 °C and then generate aliphatic aldehydes, ketones and carboxylic acids at ca. 650 °C via the session of the C–C bonds. Aromatization of the volatiles initiated at 350 °C, producing phenolics and then further to aromatic hydrocarbons. The medium pyrolysis temperature (i.e. 450 °C) tended to produce the heavier bio-oil. The in situ DRIFTS characterization of cellulose pyrolysis showed that the structural reconstruction of the feedstock occurred at ca. 430–440 °C, forming abundant C O functionalities in bio-char. The increasing pyrolysis temperature led to staged change of carbon, hydrogen and oxygen contents in bio-char. The bio-char produced at the low temperature was quite aliphatic, and increasing pyrolysis temperature enhanced the formation of graphite structure, thermal stability and the porosity of bio-char. The bio-char from cellulose had a compact structure with small surface area and very limited mesopores. The results of kinetic analysis showed that the pyrolysis of cellulose was a complex multi-step reaction process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
A review on bio-oil production from biomass by using pyrolysis method
Isahak, W. N. R. W., Hisham, M. W. M., Yarmo, M. A., & Yun Hin, T.-Y. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.039 · Cited by 624
Prospects for pyrolysis technologies in the bioenergy sector: A review
Roy, P., & Dias, G. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.136 · Cited by 405
Controlling the selectivity to chemicals from lignin via catalytic fast pyrolysis
Ma, Z., Troussard, E., & van Bokhoven, J. A. (2012) · Applied Catalysis A: General · doi:10.1016/j.apcata.2012.02.027 · Cited by 363
Distinguishing primary and secondary reactions of cellulose pyrolysis
Patwardhan, P. R., Dalluge, D. L., Shanks, B. H., & Brown, R. C. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.02.018 · Cited by 352
Yeo, J. Y., Chin, B. L. F., Tan, J. K., & Loh, Y. S. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2017.12.003 · Cited by 304
Xu, J., Tang, H., Su, S., Liu, J., Xu, K., Qian, K., Wang, Y., Zhou, Y., Hu, S., Zhang, A., et al. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.11.094 · Cited by 174
Self-citationFormation of Aromatic Structures during the Pyrolysis of Bio-oil
Wang, Y., Li, X., Mourant, D., Gunawan, R., Zhang, S., & Li, C.-Z. (2012) · Energy & Fuels · doi:10.1021/ef201155e · Cited by 155
Self-citationZhang, C., Hu, X., Guo, H., Wei, T., Dong, D., Hu, G., Hu, S., Xiang, J., Liu, Q., & Wang, Y. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.08.009 · Cited by 138
Self-citation
Cited by
Zheng, Q., Zhang, D., Fu, P., Wang, A., Sun, Y., Li, Z., & Fan, Q. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.135316 · Cited by 149
Impact of heating rates on the evolution of function groups of the biochar from lignin pyrolysis
Li, C., Hayashi, J.-I., Sun, Y., Zhang, L., Zhang, S., Wang, S., & Hu, X. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105031 · Cited by 143
Self-citationA review of biopower and mitigation potential of competing pyrolysis methods
Kung, C.-C., Fei, C. J., McCarl, B. A., & Fan, X. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112443 · Cited by 47
Yadav, N., Yadav, G., Bakthavachalam, V., Potturaja, L., Roy, J. K., & Elumalai, S. (2025) · Bioresource Technology · doi:10.1016/j.biortech.2024.131948 · Cited by 20
Metadata
- Authors
- Zhang, C., Chao, L., Zhang, Z., Zhang, L., Li, Q., Fan, H., Zhang, S., Liu, Q., Qiao, Y., Tian, Y., Wang, Y., & Hu, X.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 135
- Pages
- 110416
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W3090092467
- Cited by
- 245
- References
- 10
- FWCI
- 6.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Pyrolysis of cellulose: Evolution of functionalities and structure of bio-char versus temperature. https://app.cochat.ai/papers/10.1016/j.rser.2020.110416
- The paper
- Zhang, C., Chao, L., Zhang, Z., Zhang, L., Li, Q., Fan, H., Zhang, S., Liu, Q., Qiao, Y., Tian, Y., Wang, Y., & Hu, X. (2021). Pyrolysis of cellulose: Evolution of functionalities and structure of bio-char versus temperature. Renewable and Sustainable Energy Reviews. https://doi.org/10.1016/j.rser.2020.110416
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.