The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Review of degradation and failure phenomena in photovoltaic modules
Open accessAbstract
The degradation of photovoltaic (PV) systems is one of the key factors to address in order to reduce the cost of the electricity produced by increasing the operational lifetime of PV systems. To reduce the degradation, it is imperative to know the degradation and failure phenomena. This review article has been prepared to present an overview of the state-of-the-art knowledge on the reliability of PV modules. Whilst the most common technology today is mono- and multi-crystalline silicon, this article aims to give a generic summary which is relevant for a wider range of photovoltaic technologies including cadmium telluride, copper indium gallium selenide and emerging low-cost high-efficiency technologies. The review consists of three parts: firstly, a brief contextual summary about reliability metrics and how reliability is measured. Secondly, a summary of the main stress factors and how they influence module degradation. Finally, a detailed review of degradation and failure modes, which has been partitioned by the individual component within a PV module. This section connects the degradation phenomena and failure modes to the module component, and its effects on the PV system. Building on this knowledge, strategies to improve the operational lifetime of PV systems and thus, to reduce the electricity cost can be devised. Through extensive testing and failure analysis, researchers now have a much better overview of stressors and their impact on long term stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solar cell efficiency tables (version 57)
Green, M. A., Dunlop, E. D., Hohl‐Ebinger, J., Yoshita, M., Kopidakis, N., & Hao, X. (2020) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.3371 · Cited by 1,237
A manual for the economic evaluation of energy efficiency and renewable energy technologies
Short, W., Packey, D. J., & Holt, T. (1995) · doi:10.2172/35391 · Cited by 1,075
Practical Reliability Engineering
O'Connor, P. D. T., & Kleyner, A. (2011) · Wiley eBooks · doi:10.1002/9781119961260 · Cited by 783
Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: A critical review
Czanderna, A. W., & Pern, F. J. (1996) · Solar Energy Materials and Solar Cells · doi:10.1016/0927-0248(95)00150-6 · Cited by 669
Compendium of photovoltaic degradation rates
Jordan, D. C., Kurtz, S. R., VanSant, K., & Newmiller, J. (2016) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2744 · Cited by 556 · cited 1×
“M. Aghaei et al. [40,41].”
Vartiainen, E., Masson, G., Breyer, C., Moser, D., & Román Medina, E. (2020) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3189 · Cited by 490
Flexible CIGS, CdTe and a-Si:H based thin film solar cells: A review
Ramanujam, J., Bishop, D. M., Todorov, T. K., Gunawan, O., Rath, J., Nekovei, R., Artegiani, E., & Romeo, A. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100619 · Cited by 480
Ludin, N. A., Mustafa, N. I., Hanafiah, M. M., Ibrahim, M. A., Asri Mat Teridi, M., Sepeai, S., Zaharim, A., & Sopian, K. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.07.048 · Cited by 421
Review of Failures of Photovoltaic Modules
Köntges, M., Kurtz, S., Packard, C. E., Jahn, U., Berger, K., Kato, K., Friesen, T., Liu, H., Iseghem, M. V., Wohlgemuth, J. H., et al. (2014) · SUPSI ARIS · doi:10.71910/supsi.9135 · Cited by 393
Photovoltaic failure and degradation modes
Jordan, D. C., Silverman, T. J., Wohlgemuth, J. H., Kurtz, S. R., & VanSant, K. T. (2017) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2866 · Cited by 375 · cited 10×
“7, and degradation of metallization appears as one of the most common field module failure modes [20,25,26,49,108,189 – 192].”
InfluentialGu, Y., Li, W., Zhao, Y., Yang, B., Li, C., & He, X. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2203612 · Cited by 319
Kempe, M. D., Jorgensen, G. J., Terwilliger, K. M., McMahon, T. J., Kennedy, C. E., & Borek, T. T. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.10.009 · Cited by 312
Costa, S. C. S., Diniz, A. S. A. C., & Kazmerski, L. L. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.04.059 · Cited by 289
Powalla, M., Paetel, S., Ahlswede, E., Wuerz, R., Wessendorf, C. D., & Magorian Friedlmeier, T. (2018) · Applied Physics Reviews · doi:10.1063/1.5061809 · Cited by 281
Omazic, A., Oreski, G., Halwachs, M., Eder, G. C., Hirschl, C., Neumaier, L., Pinter, G., & Erceg, M. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.12.027 · Cited by 252
Self-citationFu, Z., Xu, M., Sheng, Y., Yan, Z., Meng, J., Tong, C., Li, D., Wan, Z., Ming, Y., Mei, A., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201809129 · Cited by 211
Effects of soiling on photovoltaic (PV) modules in the Atacama Desert
Cordero, R. R., Damiani, A., Laroze, D., MacDonell, S., Jorquera, J., Sepúlveda, E., Feron, S., Llanillo, P., Labbe, F., Carrasco, J., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-32291-8 · Cited by 169
Properties and degradation behaviour of polyolefin encapsulants for photovoltaic modules
Oreški, G., Omazic, A., Eder, G. C., Voronko, Y., Neumaier, L., Mühleisen, W., Hirschl, C., Újvári, G., Ebner, R., & Edler, M. (2020) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.3323 · Cited by 156
Luo, W., Khoo, Y. S., Kumar, A., Low, J. S. C., Li, Y., Tan, Y. S., Wang, Y., Aberle, A. G., & Ramakrishna, S. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.08.040 · Cited by 153
Modelling photovoltaic soiling losses through optical characterization
Smestad, G. P., Germer, T. A., Alrashidi, H., Férnández, E. F., Dey, S. K., Brahma, H., Sarmah, N., Ghosh, A., Sellami, N., Hassan, I. A. I., et al. (2020) · Scientific Reports · doi:10.1038/s41598-019-56868-z · Cited by 148
Structure and basic properties of photovoltaic module backsheet films
Geretschläger, K. J., Wallner, G. M., & Fischer, J. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.09.060 · Cited by 129
Eskandari, A., Milimonfared, J., & Aghaei, M. (2020) · Solar Energy · doi:10.1016/j.solener.2020.09.071 · Cited by 116
Self-citationFthenakis, V. M., & Leccisi, E. (2021) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.3441 · Cited by 99
Kuitche, J. M., Pan, R., & TamizhMani, G. (2014) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2014.2308720 · Cited by 96
Gambogi, W. J., Heta, Y., Hashimoto, K., Kopchick, J. G., Felder, T. C., MacMaster, S., Bradley, A., Hamzavytehrany, B., Garreau-Iles, L., Aoki, T., et al. (2014) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2014.2305472 · Cited by 89
Climate specific thermomechanical fatigue of flat plate photovoltaic module solder joints
Bosco, N., Silverman, T. J., & Kurtz, S. (2016) · Microelectronics Reliability · doi:10.1016/j.microrel.2016.03.024 · Cited by 89
Validation of the PVLife model using 3 million module-years of live site data
Hasselbrink, E. F., Anderson, M., deFreitas, Z., Mikofski, M. A., Shen, Y., Caldwell, S., Terao, A., Kavulak, D. F. J., Campeau, Z., & DeGraaff, D. B. (2013) · Conference record of the IEEE Photovoltaic Specialists Conference · doi:10.1109/pvsc.2013.6744087 · Cited by 88
Mechanical and thermomechanical assessment of encapsulated solar cells by finite-element-simulation
Dietrich, S., Pander, M., Sander, M., Schulze, S., & Ebert, M. P. A. (2010) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.860661 · Cited by 83
Field failure mechanism study of solder interconnection for crystalline silicon photovoltaic module
Jeong, J.-S., Park, N., & Han, C. (2012) · Microelectronics Reliability · doi:10.1016/j.microrel.2012.06.027 · Cited by 83
A review of the state-of-the-art in wind-energy reliability analysis
Alhmoud, L., & Wang, B. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.252 · Cited by 77
Mechanical Stability of Solar Cells within Solar Panels
Pingel, S., Zemen, Y., Frank, O., Geipel, T., & Berghold, J. (2009) · EU PVSEC · doi:10.4229/24theupvsec2009-4av.3.49 · Cited by 75
Kim, N., Kang, H.-W., Hwang, K., et al. (2013) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2013.09.036 · Cited by 71
Crack statistic of crystalline silicon photovoltaic modules
Köntges, M., Kajari-Schröder, S., Kunze, I., & Jahn, U. (2011) · WIP · doi:10.4229/26theupvsec2011-4eo.3.6 · Cited by 71
Lyu, Y., Fairbrother, A., Gong, M., Kim, J. H., Gu, X., Kempe, M., Julien, S., Wan, K., Napoli, S., Hauser, A., et al. (2020) · Solar Energy · doi:10.1016/j.solener.2020.02.020 · Cited by 68
Self-citationIkkurti, H. P., & Saha, S. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.03.081 · Cited by 66
Kettle, J., Stoichkov, V., Kumar, D., Corazza, M. L., Gevorgyan, S. A., & Krebs, F. C. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.04.005 · Cited by 64
Self-citationDegradation science: Mesoscopic evolution and temporal analytics of photovoltaic energy materials
French, R. H., Podgornik, R., Peshek, T. J., Bruckman, L. S., Xu, Y., Wheeler, N. R., Gök, A., Hu, Y., Hossain, M. A., Gordon, D. A., et al. (2015) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2014.12.008 · Cited by 58
Wu, D., Zhu, J., Betts, T. R., et al. (2014) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.2460 · Cited by 57
The Influence of PV Module Materials and Design on Solder Joint Thermal Fatigue Durability
Bosco, N., Silverman, T. J., & Kurtz, S. (2016) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2016.2598255 · Cited by 42 · cited 1×
“Many failures or weaknesses in the circuit can occur because of design or processing factors, such as improper sizing or poor soldering quality [174 – 176].”
Omazic, A., Oreški, G., Edler, M., Eder, G. C., Hirschl, C., Pinter, G., & Erceg, M. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.48899 · Cited by 42
Tearing and reliability of photovoltaic module backsheets
Yuen, P. Y., Moffitt, S. L., Novoa, F. D., Schelhas, L. T., & Dauskardt, R. H. (2019) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.3144 · Cited by 36
Gök, A., Fagerholm, C. L., French, R. H., & Bruckman, L. S. (2019) · PLoS ONE · doi:10.1371/journal.pone.0212258 · Cited by 35
Gagliardi, M., & Paggi, M. (2017) · Solar Energy · doi:10.1016/j.solener.2017.10.081 · Cited by 33
Measuring degradation rates of PV systems without irradiance data
Cronin, A. D., Pulver, S., Cormode, D., Jordan, D. C., Kurtz, S., & Smith, R. (2013) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.2310 · Cited by 29
Kyprianou, A., Phinikarides, A., Makrides, G., & Georghiou, G. E. (2015) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2015.2478065 · Cited by 27
Julien, S., Kempe, M., Eafanti, J. J., Morse, J., Wang, Y., Fairbrother, A., Napoli, S., Hauser, A. W., Ji, L., O’Brien, G. S., et al. (2020) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2020.110524 · Cited by 23
Self-citationMaterials selection investigation for thin film photovoltaic module encapsulation
Shimpi, T., Moffett, C., Sampath, W., et al. (2019) · Solar Energy · doi:10.1016/j.solener.2019.04.095 · Cited by 21
Solder joint stability study of wire-based interconnection compared to ribbon interconnection
Walter, J., Rendler, L. C., Ebert, C., et al. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.09.288 · Cited by 18
Flexible packaging for PV modules
Dhere, N. G. (2008) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.795718 · Cited by 11
Cited by
The environmental factors affecting solar photovoltaic output
Bamisile, O., Acen, C., Cai, D., Huang, Q., & Staffell, I. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.115073 · Cited by 330
Metadata
- Authors
- Aghaei, M., Fairbrother, A., Gok, A., Ahmad, S., Kazim, S., Lobato, K., Oreski, G., Reinders, A., Schmitz, J., Theelen, M., Yilmaz, P., & Kettle, J.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2022-05
- Volume
- 159
- Pages
- 112160
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W4225080122
- Cited by
- 636
- References
- 49
- FWCI
- 32.05
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.