The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
The Influence of PV Module Materials and Design on Solder Joint Thermal Fatigue Durability
Abstract
Finite element model (FEM) simulations have been performed to elucidate the effect of flat plate photovoltaic (PV) module materials and design on PbSn eutectic solder joint thermal fatigue durability. The statistical method of Latin Hypercube sampling was employed to investigate the sensitivity of simulated damage to each input variable. Variables of laminate material properties and their thicknesses were investigated. Using analysis of variance, we determined that the rate of solder fatigue was most sensitive to solder layer thickness, with copper ribbon and silicon thickness being the next two most sensitive variables. By simulating both accelerated thermal cycles (ATCs) and PV cell temperature histories through two characteristic days of service, we determined that the acceleration factor between the ATC and outdoor service was independent of the variables sampled in this study. This result implies that an ATC test will represent a similar time of outdoor exposure for a wide range of module designs. This is an encouraging result for the standard ATC that must be universally applied across all modules.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“It is, however, not clear its role in thermomechanical fatigue generation.Its contribution to damage on the solder bonds is rarely reported as its influence is not as critical as other components'.29)”
From Effect of viscoelasticity of ethylene vinyl acetate encapsulants on photovoltaic module solder joint degradation due to thermomechanical fatigue (2018) · cites this paper as [29]
Citations
Cites
Photovoltaic array performance model.
Kratochvil, J., Boyson, W., & King, D. (2004) · doi:10.2172/919131 · Cited by 1,340
Effect of simulation methodology on solder joint crack growth correlation
Darveaux, R. (2002) · 2000 Proceedings. 50th Electronic Components and Technology Conference (Cat. No.00CH37070) · doi:10.1109/ectc.2000.853299 · Cited by 545
Fatigue life models for SnAgCu and SnPb solder joints evaluated by experiments and simulation
Schubert, A., Dudek, R., Auerswald, E., Gollbardt, A., Michel, B., & Reichl, H. (2003) · 53rd Electronic Components and Technology Conference, 2003. Proceedings. · doi:10.1109/ectc.2003.1216343 · Cited by 391
Syed, A. (2004) · 2004 Proceedings. 54th Electronic Components and Technology Conference (IEEE Cat. No.04CH37546) · doi:10.1109/ectc.2004.1319419 · Cited by 359
Photovoltaic Array Performance Model
King, D. L., Boyson, W. E., Kratochvil, J. A., King, D. L., Boyson, W. E., & Kratochvil, J. A. (2004) · Cited by 358
Applying Anand Model to Represent the Viscoplastic Deformation Behavior of Solder Alloys
Wang, G. Z., Cheng, Z. N., Becker, K., & Wilde, J. (2001) · Journal of Electronic Packaging · doi:10.1115/1.1371781 · Cited by 325
Commonly observed degradation in field-aged photovoltaic modules
Quintana, M. A., King, D. L., McMahon, T. J., & Osterwald, C. R. (2003) · Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002. · doi:10.1109/pvsc.2002.1190879 · Cited by 291
Photovoltaic module performance and durability following long-term field exposure
King, D. L., Quintana, M. A., Kratochvil, J. A., Ellibee, D. E., & Hansen, B. R. (2000) · Progress in Photovoltaics: Research and Applications · doi:10.1002/(sici)1099-159x(200003/04)8:2<241::aid-pip290>3.0.co;2-d · Cited by 263
Long Term Reliability of Photovoltaic Modules
Wohlgemuth, J., Cunningham, D., Monus, P., Miller, J., & Nguyen, A. (2006) · 2006 IEEE 4th World Conference on Photovoltaic Energy Conference · doi:10.1109/wcpec.2006.279905 · Cited by 148
Predicting solder joint reliability for thermal, power, and bend cycle within 25% accuracy
Syed, A. (2002) · 2022 IEEE 72nd Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc.2001.927732 · Cited by 125
Cited by
Review of degradation and failure phenomena in photovoltaic modules
Aghaei, M., Fairbrother, A., Gok, A., Ahmad, S., Kazim, S., Lobato, K., Oreski, G., Reinders, A., Schmitz, J., Theelen, M., et al. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112160 · Cited by 636
“Many failures or weaknesses in the circuit can occur because of design or processing factors, such as improper sizing or poor soldering quality [174 – 176].”
Stress and strain within photovoltaic modules using the finite element method: A critical review
Nivelle, P., Tsanakas, J. A., Poortmans, J., & Daenen, M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111022 · Cited by 72
Jiang, N., Ebadi, A. G., Kishore, K. H., et al. (2019) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2019.2933057 · Cited by 54
“[14], showed that the materials and design of PV module significantly affect the fatigue evolution under thermal cycling.”
BackgroundFinger and interconnect degradations in crystalline silicon photovoltaic modules: A review
Kumar, S., Meena, R., & Gupta, R. (2021) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2021.111296 · Cited by 52
Quantitative analysis of degradation mechanisms in 30-year-old PV modules
Liu, Z., Castillo, M. L., Youssef, A., et al. (2019) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2019.110019 · Cited by 48
Self-citation
Metadata
- Authors
- Bosco, N., Silverman, T. J., & Kurtz, S.
- Affiliations
- National Laboratory of the Rockies (US)
- Venue
- IEEE Journal of Photovoltaics
- Published
- 2016-11
- Volume
- 6
- Issue
- 6
- Pages
- 1407-1412
- ISSN
- 2156-3381 (ISSN-L)
- 2156-3403
- OpenAlex
- W2525792352
- Cited by
- 42
- References
- 23
- Citations by year
- 2026: 1 · 2025: 4 · 2024: 1 · 2023: 7 · 2022: 5 · 2021: 5 · 2020: 3 · 2019: 9 · 2018: 3 · 2017: 4
- FWCI
- 2.46
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Journal of Photovoltaics (publishedVersion)
- Funders
- U.S. Department of Energy (DE-AC36-08GO28308)
- National Renewable Energy Laboratory
- U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Solar Energy Technologies Program
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electronic Packaging and Soldering Technologies
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Solar Thermal and Photovoltaic Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies
- Keywords
- photovoltaic module design, laminate thickness, silicon thickness, acceleration factor, Latin hypercube sampling, analysis of variance, finite element analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Influence of PV Module Materials and Design on Solder Joint Thermal Fatigue Durability. https://app.cochat.ai/papers/10.1109/jphotov.2016.2598255
- The paper
- Bosco, N., Silverman, T. J., & Kurtz, S. (2016). The Influence of PV Module Materials and Design on Solder Joint Thermal Fatigue Durability. IEEE Journal of Photovoltaics. https://doi.org/10.1109/jphotov.2016.2598255
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.