The DOI matches its Crossref record; 203 of the 203 references it cites were found in a registry or an index.
A review of pyrolysis technologies and feedstock: A blending approach for plastic and biomass towards optimum biochar yield
Open accessAbstract
The efficient and sustainable disposal or value addition of waste plastic has of major importance. Recent studies on the char produced via pyrolysis have demonstrated that it is a valuable additive with multiple applications ranging from soil and water amendment, improving agricultural yield, supercapacitors, fuel cells, and in support/catalysts, sustainable chemistry, and carbon sequestration. Thus, it is essential to ensure the quality and efficacy of biochar produced from any combination of feedstock and process to ensure maximum benefits. However, very few studies have focussed on techniques or process parameters to optimize biochar yield. This study aims to review pyrolysis techniques, reactor types, and pyrolysis parameters to identify the process parameters that could enhance the generation of biochar from co-pyrolysis of plastic and biomass feedstock. This review discusses biochar production techniques, the mechanism of pyrolysis technology, pyrolysis types, and the reactor types. This is followed by a review of the factors that can be used to optimize biochar production. Accordingly, the review identified temperature, heating rate, reactor bed height and type, residence time, pressure, feedstock type and blending ratio of feedstock as the determinants that had the highest influence on the yield, stability, and carbon content of biochar. Most importantly, the technology readiness level (TRL) of biomass pyrolysis, plastic pyrolysis and co-pyrolysis of biomass and plastic is discussed. The review necessitates further studies on these parameters to ascertain the accuracy of optimization that can be achieved by configuring pyrolysis processes to biochar production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–203 of 203
Zhou, Y., Chen, Z., Gong, H., Wang, X., & Yu, H. (2020) · Waste Management · doi:10.1016/j.wasman.2020.04.002 · Cited by 20
Xu, G., Song, J., Zhang, Y., & Lv, Y. (2019) · BioResources · doi:10.15376/biores.14.4.9957-9967 · Cited by 19
Alternative catalytic processes for the valorization of plastic wastes to fuels .
Sampedro, S., & Andoni, J. (2016) · Communities in ADDI (Universidad del Pais Vasco) · Cited by 8
Cited by
The potential of biochar as a microbial carrier for agricultural and environmental applications
Bolan, S., Hou, D., Wang, L., Hale, L., Egamberdieva, D., Tammeorg, P., Li, R., Wang, B., Xu, J., Wang, T., et al. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.163968 · Cited by 515
Biofuel production: exploring renewable energy solutions for a greener future
El-Araby, R. (2024) · Biotechnology for Biofuels and Bioproducts · doi:10.1186/s13068-024-02571-9 · Cited by 276
Critical review of biochemical pathways to transformation of waste and biomass into bioenergy
Manikandan, S., Vickram, S., Sirohi, R., Subbaiya, R., Krishnan, R. Y., Karmegam, N., Sumathijones, C., Rajagopal, R., Chang, S. W., Ravindran, B., et al. (2023) · Bioresource Technology · doi:10.1016/j.biortech.2023.128679 · Cited by 268
Biochar for a sustainable future: Environmentally friendly production and diverse applications
Afshar, M., & Mofatteh, S. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.102433 · Cited by 233
Hama Aziz, K. H., Fatah, N. M., & Muhammad, K. T. (2024) · Royal Society Open Science · doi:10.1098/rsos.232033 · Cited by 128
Metadata
- Authors
- Al-Rumaihi, A., Shahbaz, M., Mckay, G., Mackey, H., & Al-Ansari, T.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2022-10
- Volume
- 167
- Pages
- 112715
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W4283366023
- Cited by
- 650
- References
- 203
- FWCI
- 33.26
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.