Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 174

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Removal of methylene blue dye and lead ions from aqueous solution using activated carbon from black cumin seeds

Open access
Thabede, Patience Mapule, Shooto, Ntaote David, Naidoo, Eliazer Bobby · 2020 · South African Journal of Chemical Engineering

Abstract

This work reports the preparation of carbon from black cumin seeds (BCC) and then activated with 10 and 20 % sulfuric acid (H2SO4) to obtain new adsorbents designated black cumin activated carbon (BCAC-10) and (BCAC-20) respectively for the adsorption of lead (Pb(II)) ions and methylene blue (MB) dye from aqueous solution. The adsorbents were characterized by scanning electron microscopy (SEM), Fourier transformed infrared (FIR), thermogravimetric analyzer (TGA), X-ray diffractometer (XRD) and Brunauer, Emmett and Teller (BET) analysis. The SEM images show that both activated carbon adsorbents (BCAC-10 and BCAC-20) have rough irregular surfaces with cavities. FTIR results show the (-COO−), (-NH2), (-HSO−4), (-C=O) functional groups were involved in the adsorption processes of Pb(II) ions and methylene blue (MB) dye . Nitrogen adsorption studies show that there is an increase in surface area and pore size for both BCAC-10 and BCAC-20 in comparison with BCC. The operational parameters (concentration, contact time, temperature and pH) of Pb(II) ions and MB dyes adsorption were assessed in batch mode. It was observed that the trends for Pb(II) ions and MB dye adsorption increased with increasing initial concentration of the solution, (i.e.) greater uptake was observed in solutions with higher initial concentration. Therefore the adsorption of Pb(II) ions with initial concentration of 100 mg/L was 17.19, 17.71 and 17.98 mg/g onto BCC, BCAC-10 and BCAC-20 respectively. Whilst for MB dye it was 11.63, 12.71 and 16.85 mg/g onto BCC, BCAC-10 and BCAC-20 respectively. The equilibrium data for Pb(II) ions and MB dye fitted Freundlich isotherm model onto BCC, BCAC-10 and BCAC-20. This suggested that the process involve multi-layer adsorption with interactions between the adsorbate and the adsorbents. The results show that the adsorption processes of Pb(II) ions and MB dye were rapid in the first 20 min. It was observed that the maximum adsorption trend of Pb(II) ions and MB dye was obtained at pH 9 which made the surface of black cumin seeds to be negatively charged and therefore making it easier to be attracted to positively charged Pb (II) ions and MB dye. Kinetic studies showed that the adsorption of Pb(II) ions and MB dye onto BCC best fitted; pseudo-first order model whilst BCAC-10 and BCAC-20 data fits; pseudo-second order. The estimated pore adsorption for Pb(II) ions onto BCC, BCAC-10 and BCAC-20 was 65.85, 94.28 and 78.43 % respectively whilst MB dye was 73.37, 70.82 and 95.74 % respectively. Temperature and thermodynamics data indicated that the adsorption capacity of adsorbents increase with increasing temperature and the enthalpy (ΔH°) values indicated that the adsorption of Pb(II) ions and MB dye on the adsorbents was endothermic reaction. The entropy (ΔS°) gave positive values which indicated the randomness and degree of freedom for Pb(II) ions and MB dye in aqueous solution. The free energy (ΔG°) values for the adsorption of Pb(II) ions onto BCC, BCAC-10 and BCAC-20 show an increase in negative values as the temperature increases.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.sajce.2020.04.002

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 174

Metadata

Authors
Thabede, P. M., Shooto, N. D., & Naidoo, E. B.
Venue
South African Journal of Chemical Engineering
Publisher
Elsevier BV
Published
2020-07
Volume
33
Pages
39-50
ISSN
1026-9185 (ISSN-L)
OpenAlex
W3017775521
Cited by
174
References
4
FWCI
7.32
Type
journal article
Language
en
Open access
gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.