The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Iron-activated bermudagrass-derived biochar for adsorption of aqueous sulfamethoxazole: Effects of iron impregnation ratio on biochar properties, adsorption, and regeneration
Abstract
This work focused on the impacts of FeCl3 impregnation ratio on the properties of FeCl3-activated bermudagrass (BG)-derived biochars (IA-BCs), adsorption of sulfamethoxazole (SMX) onto IA-BCs and regeneration of SMX-spent IA-BC. Compared with the control BC (85.82 m2/g), IA-BCs made via pyrolysis with FeCl3 to BG mass ratio between 1 and 3 (1-3 g FeCl3/g BG) resulted in significantly enhancing surface area (1014-1035 m2/g), hydrophobicity, Fe content in IA-BCs (3.87-7.27%), and graphitized carbon. The properties of IA-BCs supported magnetic separation and higher adsorption (32-265 mg SMX/g BC) than the control BC (6-14 mg SMX/g BC) at various pH. Adsorption experiments indicated various adsorption mechanisms between SMX and IA-BCs via π-π EDA, hydrophobic interactions, and hydrogen bond with intraparticle diffusion limitation. The adsorption was also found to be spontaneous and exothermic. The IA-BC made at FeCl3 to BG mass ratio of 2 (IA-BC2.0) showed the maximum adsorption capacity for SMX (253 mg SMX/g BC) calculated from Langmuir isotherm model. Additionally, both NaOH desorption and thermal oxidation showed effective regeneration of SMX-saturated IA-BC2.0 over multiple cycles. After three cycles of adsorption-regeneration, 64% and 62% of regeneration efficiencies were still achieved under thermal treatment at 300 °C and desorption with 0.1 M NaOH solution, respectively, indicating a cost-efficient adsorbent for the elimination of SMX in water.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, J. R., & Kan, E. (2016) · Journal of Environmental Management · doi:10.1016/j.jenvman.2016.05.016 · Cited by 286
Self-citationChen, S.-Q., Chen, Y.-L., & Jiang, H. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b04683 · Cited by 51
Mechanism of adsorption of cadmium and lead ions by iron-activated biochar
Cui, L., Chen, T., Yin, C., Yan, J., Ippolito, J. A., & Hussain, Q. (2018) · BioResources · doi:10.15376/biores.14.1.842-857 · Cited by 44
Cited by
Adsorption of emerging contaminants from water and wastewater by modified biochar: A review
Cheng, N., Wang, B., Wu, P., Lee, X., Xing, Y., Chen, M., & Gao, B. (2021) · Environmental Pollution · doi:10.1016/j.envpol.2021.116448 · Cited by 814
Activation of persulfates by carbonaceous materials: A review
Huang, W., Xiao, S., Zhong, H., Yan, M., & Yang, X. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129297 · Cited by 558
Metadata
- Authors
- Zeng, S., Choi, Y.-K., & Kan, E.
- Venue
- Science of The Total Environment
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 750
- Pages
- 141691
- ISSN
- 0048-9697 (ISSN-L)
- OpenAlex
- W3048987876
- Cited by
- 171
- References
- 3
- FWCI
- 6.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.