The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Why reuse spent adsorbents? The latest challenges and limitations
Abstract
Despite the abundance of published reviews over the last few years, the inconsistent data representation in regards to the use of adsorbents in each work, renders the task of comparing them challenging. Disposing the adsorbent may have adverse environmental impact, which should be mitigated through regeneration and reuse processes, such as desorption. This review discusses how the importance of desorption and regeneration equates that of the adsorption stage, and presents various regeneration methods as well as the influencing parameters, advantages, and disadvantages thereof. For the purposes of this work, the adsorbents have been categorized into four groups: (i) graphene, (ii) carbon nanotubes, (iii) activated carbon compounds and (iv) clays and polymer adsorbents as representatives in order to further study their desorption and regeneration abilities, using a variety of desorption media/eluants. The process conditions, such as pH, dose required, concentration, adsorption ability and the cost of the adsorbents were examined for further analysis. The recovery efficiency and ability to get reused through the desorption process was also evaluated. The highest adsorption capacity was observed for graphene-based adsorbents reaching between 108 and >480 mg/g, and for activated carbon materials ranging from 34 to >384 mg/g, whereas carbon nanotubes and polymer-based adsorbents indicated rather low and greatly varying adsorption capacities, between 1 and >138 mg/g and between 7 and >57 mg/g, respectively. Most of the reviewed cases appear to fit the pseudo-second order (PSO) kinetic model. These materials have demonstrated a removal effectiveness between 71% and 99%. Overall, all the aforementioned adsorbents share the advantage of being highly reusable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Safe handling of nanotechnology
Maynard, A. D., Aitken, R. J., Butz, T., Colvin, V., Donaldson, K., Oberdörster, G., Philbert, M. A., Ryan, J., Seaton, A., Stone, V., et al. (2006) · Nature · doi:10.1038/444267a · Cited by 1,496
Gupta, V. K., & Nayak, A. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.11.006 · Cited by 975
Kabra, K., Chaudhary, R., & Sawhney, R. L. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0498551 · Cited by 775
Carbon based materials: a review of adsorbents for inorganic and organic compounds
Sabzehmeidani, M. M., Mahnaee, S., Ghaedi, M., Heidari, H., & Roy, V. A. L. (2021) · Materials Advances · doi:10.1039/d0ma00087f · Cited by 646
Feasibility of industrial-scale treatment of dye wastewater via bio-adsorption technology
Li, W., Mu, B., & Yang, Y. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.01.002 · Cited by 574
Regeneration of chitosan-based adsorbents used in heavy metal adsorption: A review
Vakili, M., Deng, S., Cagnetta, G., Wang, W., Meng, P., Liu, D., & Yu, G. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.05.040 · Cited by 536
Regeneration of adsorbents and recovery of heavy metals: a review
Lata, S., Singh, P. K., & Samadder, S. R. (2015) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-014-0714-9 · Cited by 491
Rápó, E., & Tonk, S. (2021) · Molecules · doi:10.3390/molecules26175419 · Cited by 490
Guo, K., Wu, Z., Yan, S., Yao, B., Song, W., Hua, Z., Zhang, X., Kong, X., Li, X., & Fang, J. (2018) · Water Research · doi:10.1016/j.watres.2018.08.048 · Cited by 425
Geng, Z., Lin, Y., Yu, X., Shen, Q., Ma, L., Li, Z., Pan, N., & Wang, X. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15544c · Cited by 418
Regeneration performance of clay-based adsorbents for the removal of industrial dyes: a review
Momina, M., Shahadat, M., & Isamil, S. (2018) · RSC Advances · doi:10.1039/c8ra04290j · Cited by 409
Kumar, P. S., Korving, L., van Loosdrecht, M. C. M., & Witkamp, G.-J. (2019) · Water Research X · doi:10.1016/j.wroa.2019.100029 · Cited by 380
Kyzas, G. Z., Lazaridis, N. K., & Mitropoulos, A. C. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.02.045 · Cited by 309
Self-citationHeavy metal removal applications using adsorptive membranes
Vo, T. S., Hossain, M. M., Jeong, H. M., & Kim, K. (2020) · Nano Convergence · doi:10.1186/s40580-020-00245-4 · Cited by 251
Review on Solvent Desorption Study from Exhausted Adsorbent
Patel, H. (2021) · Journal of Saudi Chemical Society · doi:10.1016/j.jscs.2021.101302 · Cited by 218
Fanourakis, S. K., Peña-Bahamonde, J., Bandara, P. C., & Rodrigues, D. F. (2020) · npj Clean Water · doi:10.1038/s41545-019-0048-8 · Cited by 211
Li, W.-H., Yue, Q.-Y., Gao, B.-Y., Ma, Z.-H., Li, Y.-J., & Zhao, H.-X. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.04.012 · Cited by 209
Aslam, M. M.-A., Kuo, H.-W., Den, W., Usman, M., Sultan, M., & Ashraf, H. (2021) · Sustainability · doi:10.3390/su13105717 · Cited by 202
Effects of ultrasound on adsorption–desorption of p-chlorophenol on granular activated carbon
Hamdaoui, O., Naffrechoux, E., Tifouti, L., & Pétrier, C. (2003) · Ultrasonics Sonochemistry · doi:10.1016/s1350-4177(02)00137-2 · Cited by 189
Shah, I., Adnan, R., Ngah, W. S. W., & Mohamed, N. (2015) · PLoS ONE · doi:10.1371/journal.pone.0122603 · Cited by 148
Juang, R., Yei, Y.-C., Liao, C., Lin, K., Lu, H., Wang, S., & Sun, A.-C. A. (2018) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2017.12.005 · Cited by 148
Danaci, D., Bui, M., Dowell, N. M., & Petit, C. (2019) · Molecular Systems Design & Engineering · doi:10.1039/c9me00102f · Cited by 135
Biswas, S., Rashid, T. U., Debnath, T., Haque, P., & Rahman, M. M. (2020) · Journal of Composites Science · doi:10.3390/jcs4010016 · Cited by 125
Regeneration of spent organoclays after the sorption of organic pollutants: A review
Zhu, R., Zhu, J., Ge, F., & Yuan, P. (2009) · Journal of Environmental Management · doi:10.1016/j.jenvman.2009.06.015 · Cited by 99
Tony, M. A. (2021) · Journal of Dispersion Science and Technology · doi:10.1080/01932691.2021.1878037 · Cited by 95
Vo, T. S., Vo, T. T. B. C., Suk, J. W., & Kim, K. (2020) · Nano Convergence · doi:10.1186/s40580-019-0215-0 · Cited by 93
Jiang, W., Zhang, L., Guo, X., Yang, M. J., Lu, Y., Wang, Y., Zheng, Y., & Wei, G. (2019) · Environmental Technology · doi:10.1080/09593330.2019.1627425 · Cited by 92
Kumar, P. S., Ejerssa, W. W., Wegener, C. C., Korving, L., Dugulan, A. I., Temmink, H., van Loosdrecht, M. C. M., & Witkamp, G. (2018) · Water Research · doi:10.1016/j.watres.2018.08.040 · Cited by 91
Adsorption/desorption of a dye by a chitosan derivative: Experiments and phenomenological modeling
Kyzas, G. Z., Lazaridis, N. K., & Kostoglou, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.063 · Cited by 89
Self-citationSurface modification of Carbon-Based Nanoadsorbents for the Advanced Wastewater Treatment
Gul, A., Khaligh, N. G., & Julkapli, N. M. (2021) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2021.130148 · Cited by 88
Desorption and regeneration of dye colours from low-cost materials
McKay, G., Ramprasad, G., & Mowli, P. P. (1987) · Water Research · doi:10.1016/0043-1354(87)90218-1 · Cited by 84
Bioregeneration of powdered activated carbon (PAC) loaded with aromatic compounds
de Jonge, R. J., Breure, A. M., & van Andel, J. G. (1996) · Water Research · doi:10.1016/0043-1354(95)00247-2 · Cited by 84
Abualnaja, K. M., Alprol, A. E., Ashour, M., & Mansour, A. T. (2021) · Applied Sciences · doi:10.3390/app11114786 · Cited by 82
Biodegradation of trichloroethylene (TCE) adsorbed on granular activated carbon (GAC)
Nakano, Y., Li, H., Nishijima, W., Shoto, E., & Okada, M. (2000) · Water Research · doi:10.1016/s0043-1354(00)00199-8 · Cited by 81
Ajao, V., Nam, K., Chatzopoulos, P., Spruijt, E., Bruning, H., Rijnaarts, H. H. M., & Temmink, H. (2020) · Water Research · doi:10.1016/j.watres.2020.115472 · Cited by 72
Muntean, S. G., Nistor, M. A., Muntean, E., Todea, A., Ianoş, R., & Păcurariu, C. (2018) · Journal of Chemistry · doi:10.1155/2018/6249821 · Cited by 70
Steam Regeneration of Adsorbents: An Experimental and Technical Review
Pré, P., Alappat, B. J., & Shah, I. K. (2013) · Chemical Science Transactions · doi:10.7598/cst2013.545 · Cited by 64
Graphene and carbon-based nanomaterials as highly efficient adsorbents for oils and organic solvents
Wan, S., Bi, H., & Sun, L. (2015) · Nanotechnology Reviews · doi:10.1515/ntrev-2015-0062 · Cited by 62
Development of adsorbent technologies for post-combustion CO2 capture
Drage, T. C., Smith, K. M., Pevida, C., Arenillas, A., & Snape, C. E. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.117 · Cited by 60
Wan, J., Tao, T., Zhang, Y., Liang, X., Zhou, A., & Zhu, C. (2016) · RSC Advances · doi:10.1039/c5ra25485j · Cited by 59
Kinetic model for adsorption and desorption of H2O and CO2 on hydrotalcite-based adsorbents
Coenen, K., Gallucci, F., Hensen, E. J. M., & Annaland, M. V. S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.175 · Cited by 53
Performance of composite mineral adsorbents for removing Cu, Cd, and Pb ions from polluted water
Lim, W.-R., Kim, S. W., Lee, C.-H., Choi, E.-K., Oh, M. H., Seo, S.-N., Park, H.-J., & Hamm, S. (2019) · Scientific Reports · doi:10.1038/s41598-019-49857-9 · Cited by 47
Fachina, Y. J., de Andrade, M. B., Guerra, A. C. S., dos Santos, T. R. T., Bergamasco, R., & Vieira, A. M. S. (2020) · Environmental Technology · doi:10.1080/09593330.2020.1830183 · Cited by 44
Removal of Azo and Anthraquinone Dye by Plant Biomass as Adsorbent - A Review
(2020) · Biointerface Research in Applied Chemistry · doi:10.33263/briac111.82188232 · Cited by 44
Studies on desorption and regeneration of natural pumice for iron removal from aqueous solution
Indah, S., Helard, D., & Binuwara, A. (2018) · Water Science & Technology · doi:10.2166/wst.2018.177 · Cited by 42
Messaoudi, N. E., Khomri, M. E., Chegini, Z. G., Chlif, N., Dbik, A., Bentahar, S., Iqbal, M., Jada, A., & Lacherai, A. (2021) · International Journal of Environmental & Analytical Chemistry · doi:10.1080/03067319.2021.1912338 · Cited by 40
Ateia, M., Koch, C., Jelavić, S., Hirt, A. M., Quinson, J., Yoshimura, C., & Johnson, M. S. (2017) · PLoS ONE · doi:10.1371/journal.pone.0180636 · Cited by 38
Chemical and Biological Regeneration of HDTMA-Modified Montmorillonite after Sorption with Phenol
Yang, L., Zhou, Z., Xiao, L., & Wang, X. (2003) · Environmental Science & Technology · doi:10.1021/es0342493 · Cited by 37
Ghani, N. R. N. A., Jami, M. S., & Alam, M. Z. (2021) · The International Islamic University Malaysia Repository (The International Islamic University Malaysia) · doi:10.22059/poll.2020.307069.859 · Cited by 35
Toński, M., Paszkiewicz, M., Dołżonek, J., Flejszar, M., Bielicka‐Giełdoń, A., Stepnowski, P., & Białk‐Bielińska, A. (2021) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2021.126355 · Cited by 33
Bisphenol A Removal by Adsorption Using Waste Biomass: Isotherm and Kinetic Studies
(2020) · Biointerface Research in Applied Chemistry · doi:10.33263/briac111.84678481 · Cited by 30
Desorption of copper ions from the polyamine-functionalized adsorbents: Behaviors and mechanisms
Liu, C., Liang, X., Liu, J., & Yuan, W. (2016) · Adsorption Science & Technology · doi:10.1177/0263617416663732 · Cited by 27
Cleaner Approach for Atrazine Removal Using Recycling Biowaste/Waste in Permeable Barriers
Lago, A., Silva, B., & Tavares, T. (2021) · Recycling · doi:10.3390/recycling6020041 · Cited by 25
Removal and Comparative Adsorption of Anionic Dye on Various MgAl synthetic Clay
(2021) · Biointerface Research in Applied Chemistry · doi:10.33263/briac116.1498614997 · Cited by 25
Removal of Malachite Green Dye Using Oil Palm Empty Fruit Bunch as a Low-Cost Adsorbent
(2021) · Biointerface Research in Applied Chemistry · doi:10.33263/briac116.1499815008 · Cited by 22
Preparation and Characterization of Bio-Adsorbent from Coconut Husk for Remazol Red Dye Removal
(2020) · Biointerface Research in Applied Chemistry · doi:10.33263/briac113.1000610015 · Cited by 20
Santos, T. M., Silva, J. V., da Silva, G. F., & Antônio, L. (2021) · Biointerface Research in Applied Chemistry · doi:10.33263/briac115.1321413231 · Cited by 16
Cited by
Innovative Adsorbents for Pollutant Removal: Exploring the Latest Research and Applications
Akhtar, M. S., Ali, S., & Zaman, W. (2024) · Molecules · doi:10.3390/molecules29184317 · Cited by 423
Khan, M. D., Singh, A., Khan, M. Z., Tabraiz, S., & Sheikh, J. (2023) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2023.103579 · Cited by 384
Imran, A., & Ahmed, S. (2025) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-025-06350-3 · Cited by 4
Metadata
- Authors
- Gkika, D. A., Mitropoulos, A. C., & Kyzas, G. Z.
- Venue
- Science of The Total Environment
- Publisher
- Elsevier BV
- Published
- 2022-05
- Volume
- 822
- Pages
- 153612
- ISSN
- 0048-9697 (ISSN-L)
- OpenAlex
- W4210701034
- Cited by
- 274
- References
- 57
- FWCI
- 15.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.