The DOI matches its Crossref record; 111 of the 111 references it cites were found in a registry or an index.
Regeneration of chitosan-based adsorbents used in heavy metal adsorption: A review
Abstract
Abstract Adsorption of heavy metal ions on chitosan-based adsorbents has been extensively investigated. However, few studies explored the feasibility of desorbing and regenerating chitosan. Adsorbents used after adsorption of heavy metals are discarded, and this practice exacerbates the solid treatment problem. Regeneration and reuse of exhausted adsorbents should be considered to operate environment-friendly and cost-effective adsorption. This review was performed to summarize the desorption of heavy metal ions and possible regeneration of chitosan-based adsorbents using various desorption agents such as acids, alkalis, salts, and chelating agents. It was found that the highest desorption efficiencies obtained by acidic eluents. The percentage use of desorption agents for desorbing followed the order of acids (49.3%) > chelators (26.9%) > alkalis (14.9%) > salts (8.9%). Moreover, the proper desorption time were estimated to be 0.84 h to 1.37 h. Beneficial information is provided for regeneration and recovery of chitosan adsorbents.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Perry's chemical engineers' handbook
(2008) · Choice Reviews Online · doi:10.5860/choice.45-4393 · Cited by 10,121
Recent developments in polysaccharide-based materials used as adsorbents in wastewater treatment
Crini, G. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.11.002 · Cited by 2,183
Interactions of metal ions with chitosan-based sorbents: a review
Guibal, E. (2004) · Separation and Purification Technology · doi:10.1016/j.seppur.2003.10.004 · Cited by 1,850
Detoxification of metal-bearing effluents: biosorption for the next century
Volesky, B. (2001) · Hydrometallurgy · doi:10.1016/s0304-386x(00)00160-2 · Cited by 1,281
Metal complexation by chitosan and its derivatives: a review
Varma, A. J., Deshpande, S. V., & Kennedy, J. F. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2003.08.005 · Cited by 1,174
Vakili, M., Rafatullah, M., Salamatinia, B., Abdullah, A. Z., Ibrahim, M. H., Tan, K. B., Gholami, Z., & Amouzgar, P. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.07.007 · Cited by 1,099
Self-citationRemoval of copper(II) ions from aqueous solution onto chitosan and cross-linked chitosan beads
Wan Ngah, W. S., Endud, C. S., & Mayanar, R. (2002) · Reactive and Functional Polymers · doi:10.1016/s1381-5148(01)00113-4 · Cited by 938
Hu, X.-J., Wang, J.-S., Liu, Y.-G., Li, X., Zeng, G.-M., Bao, Z.-L., Zeng, X.-X., Chen, A.-W., & Long, F. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.09.034 · Cited by 852
Bioadsorbents for remediation of heavy metals: Current status and their future prospects
Gupta, V. K., Nayak, A., & Agarwal, S. (2015) · Environmental Engineering Research · doi:10.4491/eer.2015.018 · Cited by 823
Removal of heavy metal ions using chitosan and modified chitosan: A review
Zhang, L., Zeng, Y., & Cheng, Z. (2016) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2015.12.013 · Cited by 806
Cited by
Chitosan modifications for adsorption of pollutants – A review
Saheed, I. O., Oh, W. D., & Suah, F. B. M. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.124889 · Cited by 616
Baskar, A. V., Bolan, N., Hoang, S. A., Sooriyakumar, P., Kumar, M., Singh, L., Jasemizad, T., Padhye, L. P., Singh, G., Vinu, A., et al. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.153555 · Cited by 615
Recent advances in heavy metal removal by chitosan based adsorbents
Upadhyay, U., Sreedhar, I., Singh, S. A., Patel, C. M., & Anitha, K. L. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117000 · Cited by 532
Adsorption of heavy metals on natural zeolites: A review
Velarde, L., Nabavi, M. S., Escalera, E., Antti, M.-L., & Akhtar, F. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.138508 · Cited by 491
Adsorption of organic water pollutants by clays and clay minerals composites: A comprehensive review
Ewis, D., Ba-Abbad, M. M., Benamor, A., & El-Naas, M. H. (2022) · Applied Clay Science · doi:10.1016/j.clay.2022.106686 · Cited by 344
Metadata
- Authors
- Vakili, M., Deng, S., Cagnetta, G., Wang, W., Meng, P., Liu, D., & Yu, G.
- Venue
- Separation and Purification Technology
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 224
- Pages
- 373-387
- ISSN
- 1383-5866 (ISSN-L)
- OpenAlex
- W2944191345
- Cited by
- 536
- References
- 111
- FWCI
- 20.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Regeneration of chitosan-based adsorbents used in heavy metal adsorption: A review. https://app.cochat.ai/papers/10.1016/j.seppur.2019.05.040
- The paper
- Vakili, M., Deng, S., Cagnetta, G., Wang, W., Meng, P., Liu, D., & Yu, G. (2019). Regeneration of chitosan-based adsorbents used in heavy metal adsorption: A review. Separation and Purification Technology. https://doi.org/10.1016/j.seppur.2019.05.040
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.