The DOI matches its Crossref record; 73 of the 73 references it cites were found in a registry or an index.
Urban building energy modeling (UBEM) tools: A state-of-the-art review of bottom-up physics-based approaches
Open accessAbstract
Abstract Regulations corroborate the importance of retrofitting existing building stocks or constructing new energy-efficient districts. There is, thus, a need for modeling tools to evaluate energy scenarios to better manage and design cities, and numerous methodologies and tools have been developed. Among them, Urban Building Energy Modelling (UBEM) tools allow the energy simulation of buildings at large scales. Choosing an appropriate UBEM tool, balancing the level of complexity, accuracy, usability, and computing needs, remains a challenge for users. The review focuses on the main bottom-up physics-based UBEM tools, comparing them from a user-oriented perspective. Five categories are used: (i) the required inputs, (ii) the reported outputs, (iii) the exploited workflow, (iv) the applicability of each tool, and (v) the potential users. Moreover, a critical discussion is proposed, focusing on interests and trends in research and development. The results highlighted major differences between UBEM tools that must be considered to choose the proper one for an application. Barriers of adoption of UBEM tools include the needs of a standardized ontology, a common three-dimensional city model, a standard procedure to collect data, and a standard set of test cases. This feeds into future development of UBEM tools to support cities’ sustainability goals.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of end-use energy consumption in the residential sector: A review of modeling techniques
Swan, L. G., & Ugursal, V. I. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2008.09.033 · Cited by 1,934
Contrasting the capabilities of building energy performance simulation programs
Crawley, D. B., Hand, J. W., Kummert, M., & Griffith, B. T. (2008) · Building and Environment · doi:10.1016/j.buildenv.2006.10.027 · Cited by 1,858
Modelling radiation fluxes in simple and complex environments: basics of the RayMan model
Matzarakis, A., Rutz, F., & Mayer, H. (2010) · International Journal of Biometeorology · doi:10.1007/s00484-009-0261-0 · Cited by 1,633
Urban building energy modeling – A review of a nascent field
Reinhart, C. F., & Cerezo Davila, C. (2016) · Building and Environment · doi:10.1016/j.buildenv.2015.12.001 · Cited by 1,081
A review of bottom-up building stock models for energy consumption in the residential sector
Kavgic, M., Mavrogianni, A., Mumovic, D., Summerfield, A., Stevanovic, Z., & Djurovic-Petrovic, M. (2010) · Building and Environment · doi:10.1016/j.buildenv.2010.01.021 · Cited by 941
A review of urban energy system models: Approaches, challenges and opportunities
Keirstead, J., Jennings, M., & Sivakumar, A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.02.047 · Cited by 641
Norman, J., MacLean, H. L., & Kennedy, C. A. (2006) · Journal of Urban Planning and Development · doi:10.1061/(asce)0733-9488(2006)132:1(10 · Cited by 612
Ten questions on urban building energy modeling
Hong, T., Chen, Y., Luo, X., Luo, N., & Lee, S. H. (2019) · Building and Environment · doi:10.1016/j.buildenv.2019.106508 · Cited by 587
Self-citationLindberg, F., Holmer, B., & Thorsson, S. (2008) · International Journal of Biometeorology · doi:10.1007/s00484-008-0162-7 · Cited by 574
A review of modelling approaches and tools for the simulation of district-scale energy systems
Allegrini, J., Orehounig, K., Mavromatidis, G., Ruesch, F., Dorer, V., & Evins, R. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.123 · Cited by 521
Cited by
Ahmad, T., Madonski, R., Zhang, D., Huang, C., & Mujeeb, A. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112128 · Cited by 711
Darvishvand, L., Kamkari, B., Huang, M. J., & Hewitt, N. J. (2025) · Sustainable Cities and Society · doi:10.1016/j.scs.2025.106492 · Cited by 42
Metadata
- Authors
- Ferrando, M., Causone, F., Hong, T., & Chen, Y.
- Venue
- Sustainable Cities and Society
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 62
- Pages
- 102408
- ISSN
- 2210-6707 (ISSN-L)
- OpenAlex
- W3042542258
- Cited by
- 379
- References
- 73
- FWCI
- 17.31
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Urban building energy modeling (UBEM) tools: A state-of-the-art review of bottom-up physics-based approaches. https://app.cochat.ai/papers/10.1016/j.scs.2020.102408
- The paper
- Ferrando, M., Causone, F., Hong, T., & Chen, Y. (2020). Urban building energy modeling (UBEM) tools: A state-of-the-art review of bottom-up physics-based approaches. Sustainable Cities and Society. https://doi.org/10.1016/j.scs.2020.102408
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.